English
français
Deutsch
русский
español
português
العربية
日本語
한국의
Tiếng việt
Call Us Now
TEL: +86-4000988557; Skype ID: gfreex@hotmail.com;
WeChat: Troysupply_com; QQ ID: 8936906.
Industrial Delta Spider Robot:
400mm-1200mm working diameter
1-3kg rated payload
KEBA teach pendant
Item No.:
TR600D-4WPayment:
FOB / CIFProduct origin:
ChinaColor:
WhiteShipping port:
ShenZhenLead Time:
15
TEL: +86-4000988557; Skype ID: gfreex@hotmail.com;
WeChat: Troysupply_com; QQ ID: 8936906.
The DELTA robot is a classic parallel robot configuration. It has the characteristics of three-dimensional XYZ translation and rotation around the Z axis. It has the advantages of fast speed, good accuracy, high reliability, strong ease of use, and low maintenance cost. Widely used in high-speed sorting and packaging。
Delta Robot main function:
Ø *Number of axes: 3+1
Ø * Work space: X=600mm, Y=200mm, φ=600mm
Ø * Maximum load: 1kg
Ø * Speed range: 70-150 times/min
Ø * Application industries: food, medicine, daily chemical products, electronics, etc.
Delta Robot Features:
Ø * Accurate positioning, stable and reliable, strong flexibility
Ø * Unique compression spring design, prolong the service life and improve the safety of use
Ø * Unique universal joint design, rotation accuracy up to 0.5 degrees
Ø * Inverted installation, good tracking performance.
* High quality, cost-effective, visual dynamic tracking pick and place
* Pick up goods at ultra-high speed, up to 120 times/min
* High cost performance, independent research and development system, appearance
* Repeat positioning accuracy up to ±0.1mm
* Strong load-bearing capacity, high rigidity, low self-weight load ratio,
* Good dynamic performance
Delta Robot Technical parameter
|
TR600D-4W |
|||
|
Freedom of movement |
4 axis |
||
|
Repeat positioning accuracy (mm) |
±0.1 |
||
|
Rated load (kg) |
1 |
||
|
work plan |
X=600mm Y=200mm φ=600mm |
||
|
Operating speed |
0.4s/Beat（25/305/25(mm)） |
||
|
Visual positioning module |
Optional（130W camera、lens、light source） |
||
|
Movement instructions |
PTP、LINE、PICK、PLACE |
Angle positioning accuracy |
0.5° |
|
Speed "times/min" |
70-150 |
HMI |
7 inch pendant |
|
Noise level |
＜70db |
Robot quality |
67kg |
|
Protection level |
IP56 |
power input |
220V |
|
rated power |
3kw |
Installation method |
Upside-down |
|
Drive way |
AC Servo drive |
Maximum speed (m/s) |
6 |
Leave a message
High speed and Reliable Delta Robots supply. It's build up with panasonic servos. Supports vision camera on production lines
4 axis Delta Robots/Spider Robots are suitable for food packaging industry. The robot vision system is availiable also !
4 axis delta robots are designed for food packaging in the production lines. such as chocolate, biscuit and bread factory makers.
Industrial Delta Spider Robot: 400mm-1200mm working diameter 1-3kg rated payload KEBA teach pendant
* Delta robots are cost-effective, high-quality and low-cost, can be customized OEM design for customers, and support various visual sensor information; * TRD robot application system is mainly composed of three parts: robot, wire feeding and robot installation frame. The robot consists of a substrate, a motor cover, a rotating shaft, a main robot arm; it is composed of auxiliary mechanical arm and gripper center.
The DELTA robot is a classic parallel robot configuration. It has the characteristics of three-dimensional XYZ translation and rotation around the Z axis. It has the advantages of fast speed, good accuracy, high reliability, strong ease of use, and low maintenance cost. It is widely used in high-speed sorting and packaging fields.
*Product advantages: fast speed, high precision *Long service life and stable performance *Strong compatibility and strong flexibility *Simple control and ease of use
*Robot advantages: fast speed, high precision *Long service life and stable performance *Strong compatibility and strong flexibility *Simple control and ease of use
The high configuration of our Delta Robot ensures with high performance and high cost performance: *By using imported from Japan's Panasonic servo motors. *by High precision planetary reducers. *Payload from 1kg to 15kg. *Working Diameter from 350mm-1400mm.
Robot Features: Large rotation degree, wide applicability Independent mold opening, aluminum profile molded structure, beautiful appearance Hand-held teaching programmer, programming is quick and easy Dispensing speed and glue amount can be set individually High-precision stepping motor control, precise dispensing track Can be used to dispense space points, lines, arcs, and other arbitrary shapes A variety of dispensing needles, syringes, dispensing valves and controllers to meet different needs
Similar your real girlfriend Customized body shape, face appearance and eye color options etc. Warm Body function Fluently English and Chinese speaking
AI Reception Robot features: use: Restaurant & Hotel Supplies Place of Origin: China Model Number: TR-WS02 Color: Starry White/Starry Night Black Material: High Strength PC+ABS Size: 410mm*410mm*1000mm Applicable people: ALL Battery capacity: 10.4 Ah , 25.2 V Endurance time: 8h Net weight: 21.1kg Screen size: 14 inch
M800 series product feature： *50% reduction in volume and wiring time *30% energy savings *3.2kHz response speed
Spiral Conveyor Applications: Such as food mesh belt; food cleaning conveyor chain plate; B-shaped mesh belt for chocolate coating machine. At the same time, it produces biscuit machinery, imported machines, ultra-thin energy-saving mesh belt, steamed mesh belt, frying box, drying hanging box etc.
Killerbody Bumblebee Helmet features: Unit weight: 1.8kg Product volume: 38cm * 38cm * 38cm Material: ABS Function: music/voice, deformation switching, bluetooth audio Origin: Mainland China Brand: killerbody Product Category: Transformers Control method: voice control Whether electric: yes Power supply mode: battery Packing: color box Anime Character: Bumblebee
Power: 5W Range: Over 2000m Battery type: 18650*2 lithium battery Dimension: Length 21.5cm * Diameter 4cm.
Production Model: Cup type Speed: 25+pc/min Rate of defect prodcution: Less than 1% Face mask for Adult Size.
AM400 series medium-sized PLC Product performance: Built-in EtherCAT bus *Can bring 4 or 8 servo axes (am401 can bring 4 axes, AM402 can bring 8 axes), support synchronous positioning, electronic cam, interpolation function. *Can expand 125 racks at the same time, can expand 32000 IO points.
The MOD mobile collaborative robot itself is an operator that can move autonomously. Timely complete the tasks of multiple different stations in the production line. Using Mecanum wheel drive mode. Realize 360° movement in any direction, and can work flexibly in a small working space, effectively Improve site utilization and production efficiency. By matching rich end-fixtures and visual knowledge Different equipment, which can realize grasping, assembly, sorting, loading and unloading, moving, handling, vision Detection and other functions are more accurate, stable and efficient. Two-arm bionic design, more close to human operation mode, suitable for a variety of typical work stations that require both hands at the same time.
Cobot CS66 Parameters: Six degrees of freedom, weight 20kg, load 6kg Working radius 914mm Repeat positioning accuracy ±0.03mm Maximum speed 2.6 m/s Typical power 250W Protection grade IP54
Plasma/Flame cutting machine controller Famous Brand in China CNC industrial field Easy operation and multiple functions Online technical supports
Engine:4 Stroke; Seats:3; Horsepower:> 300hp Cylinders:4; Engine Capacity:1300cc;
The security patrol robot has four core technologies with independent intellectual property rights, creating a smart new security model of human-machine collaboration, and helping the police to develop through science and technology. At present, patrol robots have very mature applications in airports, stations, supermarkets, pedestrian streets and other scenarios.
【Model】TR1030A-230 【Action type】Multi-joint type 【Rated load】30kg 【Motion radius】2300mm 【Weight】700kg 【Number of axes】6 axes
Main product applications: commercial robots, teaching robots (teaching robots for universities, middle schools, and elementary schools), collaborative six-axis robots, photography and video robots, beauty and body robots, milk tea robots, auto parts, elevator parts, auto parts inspection tools, precision hardware, medical equipment accessories, etc. .
QS7AA010M is a new generation of general-purpose servo motor driver, which is optimized and improved on the basis of QS6 series servo driver. more stable and more convenient. More mature and stable, rich and complete information. The servo drivers add to 485 new communication functions, more convenient and reliable connection with the host computer or controller software.
1. The motherboard has 3188 games built in, including 100+ 3D games 2. The memory card is 32G, running with 4 cores without freezing or crashing 3. Support to pause the game midway 4. Quick search game function 5. Support 4 handles online 6. Button custom sorting 7. HD LCD screen 8. Support multi-language switching
THR8 Harley electric bikes are designed for people daily work and daily school traveling everyday with 70km each time battery charging.
Robot Applications: ——Material handling, palletizing, die casting, assembly Greater flexibility, more stable performance, and lower energy consumption; Minimize errors through the robot's visual function; (whether to use it) Maximum throughput with high-speed performance; Long working time; Fixed automation;
The unmanned forklift (AGV) adopts Japanese AGV technology. After years of localization exploration and testing, it now has excellent practicality and rich applicability. The characteristics of in-situ rotation, human-computer interaction friendliness, easy expansion, and easy integration have become the technical representatives of Uwangte AGV. The AGV scheduling system has the function of route control, route avoidance and automatic calls and task scheduling.
Similar your real girlfriend Customized body shape, face appearance and eye color options etc. Warm Body function Fluently English and Chinese speaking
The application of video microscope in product contrast inspection: *Graphic overlay *Microscope *HDMI camera *Video microscope
Relying on scientific management system, convenient transportation conditions, strong production capacity, testing methods and perfect sales network, our factory manufactures series of products with high quality, low price and beautiful appearance to serve various industrial and mining enterprises. Main business: a variety of high-strength chains; lifting machinery; conveying machinery; mine support products; crane parts and maintenance services Ship chain, green decoration chain, stainless steel chain, bucket elevator-hoist chain, chain hook, hopper, sprocket, plate chain and other accessories, conveying machinery-FU conveyor accessories, chain conveyor accessories, scrapers Plate conveyor accessories, slag conveyors, slag remover accessories, mine support-bolts, anchor plates, W steel belts, anchor cables, anchoring agents and other supporting products. The above products are used in: lifting, metallurgy, coal, petroleum, building materials, cement, electric power, chemical industry, shipbuilding, transportation and greening industries. Non-standard products can be customized according to user needs.
Application for assembly: Greater flexibility, more stable performance, and lower energy consumption; Maximum throughput with high-speed performance; Long working time; Fixed automation;
Anti drone device is designed for airport control, public safty control etc.
Production Speed: 40pcs/minute Machine operator: 1 person Suitable for N95/KN95 face mask suppliers in local country !
Household latex gloves production line: The Latex/Nitrile rubber solution of the household glove dipping machine is fed from the top of the distillation tower, and is distilled by steam heating. Dipping household latex gloves manufacturing equipment adopts the advanced technology and process formula design of Japanese and Korean cashmere glove production lines. The equipment structure is reasonable and suitable for various formulas.
Similar your real girlfriend Customized body shape, face appearance and eye color options etc. Warm Body function Fluently English and Chinese speaking
TaiWan famous brand servos drives A2 and B2 series
TRL series robot stacking unmanned forklift application scenarios: factories, warehousing, workshops, logistics, etc. Mainly used for pile height.
Drones are widely used in civil, police, urban management, agriculture, geology, meteorology, electric power, rescue and disaster relief, video shooting and other industries. Drone have realized electronic, informatized, and intelligent inspections, improving the efficiency of power line inspections, the level of emergency rescue and the reliability of power supply. In emergency situations such as flash floods and earthquake disasters, drones can conduct surveys and emergency investigations on potential hazards of the line, such as the collapse of the tower base, without being affected by the road conditions at all, and it is not necessary to climb the tower. It can also survey the blind corners of the human eye, which is very helpful to quickly restore power.
From 500kg, 1Ton to 40 Ton Payload 6 feet steward Robots are available !
Robot Features: Configure 300ML special silicone barrel Precise glue dispenser, accurate glue application, quick glue reaction Suitable for silicone, yellow glue, white latex, glass glue, sealant, etc. Chemical resistance, strong durability, balanced coating lines At the end of each dispensing cycle, there is a suction force to solve the serious problem of glue drawing.
Similar your real girlfriend Customized body shape, face appearance and eye color options etc. Warm Body function Fluently English and Chinese speaking
Three-wheeled electric forklift Introduction: 3 wheeled forklift is designed to lift standard pallet with 500kg load capacity and 2150mm lifting height. Mini Electric Forklift is an ideal facility to load/unload goods in stacking warehouses, super-market, workshops, production lines or handle goods on/off trucks, containers, etc
Main Applications: large-scale architectural glass, home decoration, exterior wall laminated glass, etc. Construction, bathroom, electrical appliances, furniture glass, etc.
4 axis delta robots are designed for food packaging in the production lines. such as chocolate, biscuit and bread factory makers.
1100CC 4 wheels drive 67 horse power 4 cylinders by fuel injection
QS7AA020M AC Servo Driver is a new generation of general-purpose servo motor driver, which is optimized and improved on the basis of QS6 series servo driver. more stable and more convenient. More mature and stable, rich and complete information. The servo drivers add to 485 new communication functions, more convenient and reliable connection with the host computer or controller software.
Automatic fish cutting and scaling machine: Model: TR-017 Product use: Cut fish back and remove fish scales Input voltage: 220V/380V Total Power: 1.5kw Dimensions: 600*600*950 (mm) After-sales service: One year warranty and lifetime maintenance.
Dimensions: 1336*1296*1218 Model: XSJ11A Production capacity: 3600/hour Output: 120kg/hour Rated Power: 4.7KW Power Source: 220V 50Hz(1P)
3D Holographic Girlfriend Specification: Model: TR-AIEra Brand: ODM Material: Alloy Color Classification: Golden Exclusive Edition Compatible platform: ANDROID iOS Smart type: AI virtual girlfriend Power W: 15 W Product net weight (kg): 2.1 kg Product size (mm): 265x265x160 mm Smart warranty period: 12 months
Production Model: Fish style. Speed: 80-100pc/min Rate of defect prodcution: Less than 4% Face mask for Adult Size.
TROY Welding Robot with good price, popular MIG welding Robot job(15 month warranty)
M820 series product feature： *50% reduction in volume and wiring time *30% energy savings *3.2kHz response speed
Robot Applications: ——Material handling, palletizing, die casting, assembly Greater flexibility, more stable performance, and lower energy consumption; Minimize errors through the robot's visual function; (whether to use it) Maximum throughput with high-speed performance; Long working time; Fixed automation;
Six degrees of freedom, weight 13kg, load 3kg Working radius 624mm Repeat positioning accuracy ±0.03mm Maximum speed 2.0 m/s Typical power 150W Protection grade IP54
MG500 Rally Motorcycles are designed for off road users, it's can be rided on both high road and off road
*Product advantages: fast speed, high precision *Long service life and stable performance *Strong compatibility and strong flexibility *Simple control and ease of use
The 6 axis robot Support PC, mobile phone, teach pendant, voice, APP, and other intelligent interactive control methods.
Easy to operate: Force-free teching effectively reducesdebagging time and learning cost.Portable PC,friendly man-machine operation interfacemakes the robot easier to use. Modularity: All-in-one module of reducer,motor,encoderand drive,which is convenient for quickdisassembly. Quick deployment: 10kg in rated load with 36kg in weight.Light-weight installation and flexible deployment.
Production Model: Fish style(KF94). Speed: 120+pc/min Rate of defect prodcution: Less than 1%. Face mask for Adult Size.
Ion implantation equipment Features: • high productivity IonSolar has the function of continuous film feeding, and the production capacity of a single machine can reach 1800 pieces/hour, which makes it possible to equip a production line with only one machine, and fully realizes a good match with the production capacity of the existing production line.
1. Battery capacity: 13300 400Mah 2. Juice capacity: 2.0 ml 3. Nicotine salt: 3%-6% choice 4.500 ports/carry three filters 5. Output voltage: 3.6V 6. Size: Φ14*85mm 7. Material: stainless steel 304 8. Color can be customized 9. Taste can be customized
1. This machine is an automatic headband type KN95 mask production line, which automatically produces multi-layer masks with double-fold ears; 2. Driven by Mitsubishi servo motor, with high stability; 3. The machine adopts branded ultrasonic welding machine, which has good welding effect, good stability and low failure rate; 4. Panasonic PLC programming control, servo control, high degree of automation, high output and good stability; 5. Intelligent material supply, through the installation of sensors, realize the detection of material production, and the machine will stop and sound an alarm when there is no material; 6. Nose line: automatic line feeding and cutting; 7. LOGO pad printing, special LOGO or pattern can be customized according to requirements; 8. Automatically realize left and right ear strap feeding, cutting load and ultrasonic welding; 9. Fold the fabric that has been processed in half in half; 10. Through the mold, the folded fabric is further processed into finished products
Paper Cup Packaging Machine introduction: * HMI friendly interface for easier operation; * High quality AC drive for main motor; * High precise sensor for parameter compensation; * Conveyor belt design for 24hours running; * Perfect seal for each of package.
High Speed Round Printing Machine applications: For Barrel, Plastic cup, and round shape items. Over 1000pc/minute.
Application range: calcium carbonate crushing processing, gypsum powder processing, power plant desulfurization, non-metallic ore pulverizing, coal powder preparation, etc. Material: quartz, feldspar, calcite, talc, barite, fluorite, rare earth, marble, etc.
1. It adopts the newest type high-power transmission mechanism to arrange the chain and drive the main driving shaft. The errors and noises of other gear wheel transmission can be avoided. 2. Imported controlling system is adopted; also it can be equipped with detecting and rejection function device (Omron Sensor) for number of medicines according to the user’s requirement. It adopts imported frequency inverter. 3. It adopts photoelectrical controlling system to make PVC, PTP, Aluminum/Aluminum material to be automatically fed and waste side to be cut automatically to guarantee the Synchronous stability of over- length distance and multi stations. 4. It can be optional equipped with photocell correction device, imported stepper motor traction and image- character register to optimize packing grade 5. The machine is suitable for industries of foodstuff, medicine, medical instruments, hardware, electronics and etc. for packing.
Single side grinding/polishing machine: Name: Single-sided copper plate polishing machine TR-ES50B Machine size: Length 2450㎜×Width 1721㎜×Height 2900㎜ Machine weight: 7500KG.
Carbon Crystal painting heater features: Rated Voltage: AC220V+/-5%, 50HZ Power: 500w Frame: Alu frame Certification: CE, RoHS Working life: >100,000 hours Overheat protection: Yes Electric conversion rate: 98% Heating element: carbon crystal Infrared heater type: electric Leaking current: below 0.01ma Screen temperature: 70-85°C Heating area per pc: >20m2 Color: painting/picture/pure white Installation: Wall Mounted, Freestanding Function: Intelligent Adjustable Thermosta OverheatProtection
Polished silicon wafer features: Diameter (mm): 200 Model: P, N Crystal orientation: <100>, <111>, <110> Strong processing capabilities and technological guarantees, and can provide products and services that meet customer needs according to customer needs or specific specifications.
Delta 3D printers are designed for PE/PVC material parts printing, suitable for toy factory makers
MIG welding robot for steel, stainless steel. Compatible with 1/2 axis Rotator table. Laser seems tracking system is available for this robot !
Electric Stand up Forklift Introduction: Stand up electric forklift is designed to lift standard pallet with 500kg load capacity and 2000mm lifting height. Electric Forklift is an ideal facility to load/unload goods in stacking warehouses, super-market, workshops, production lines or handle goods on/off trucks, containers, etc
Fruit Peeling Machine Information: Product Model: TRP-99S Product size: 600*600*1410MM Product output: 180-300 pieces/H Product power: 800W/1600W Product weight: 100KG Product material: 304 stainless steel
Balance Crane features: 1. The operating range is 7 meters, and the market is generally 5 meters. 2. The lifting mechanism adopts the elevator principle, and the failure rate is low. 3. 360 degree free rotation, no dead angle. 4. 1.5KW motor, low energy consumption and low noise. 5. The appearance is electrostatically sprayed, which is beautiful and has good anti-corrosion performance. 6. It can be customized according to customer needs.
The handling robot is mainly suitable for large load and large-scale work occasions. Industrial Robot For Material Handling have Good general performance and Fast running speed.
Wafer Polishing Machine High-precision double-sided grinding polishing machine TR-32B Mechanical Dimensions: Length 3850㎜×Width 2900㎜×Height 3700㎜ Machine weight: 26000KG
Physical safety system: Far-field protection: ØFar-field 360° 150m instant mapping, real-time positioning, navigation ability Near-field Protection: ØNear-field 360° safety protection: Ø6m 360° ToF camera day and night obstacle avoidance Ø6m ultrasonic fusion human monitoring, glass anti-collision ØBelow 5cm protection of 3m small dot pitch infrared laser array ØAnti-fall and mechanical edge contact
Soldering robots are designed for the factory with electric components assembling such as Samsung, Foxconn, LG and Canon etc.
*Biochemical defense *Tear gas defense *COVID-19 defense by N95 filters *Environmental pollution prevention *Airborne infectious disease defense
Boat Specifications: Product name: 68-foot luxury yacht Product number: TR-MY68 Main dimensions: 20.60×4.80×2.40m Host power: 370Hp×2; Crew: 12 people Draft: 1.0m; Speed: 18Kn Navigation area: inland river B level
Floor cleaning Robot: It's relying on mature SLAM robot autonomous positioning and navigation technology, through the collision avoidance design of lidar + 3D camera,precise navigation and positioning, replacing manual labor with robots, reducing the difficulty of ground cleaning, improving cleaning efficiency and quality, Easily competent in various complex large scenes, with the advantages of simple operation, comfortable use, high efficiency and speed, etc., it has become the new favorite in shopping malls, hotels, high-speed railway stations and other fields.
1. Application scenario: Automatic production of 4-6 layers folding masks. 2. Basic functions: A. Folding masks are produced by the whole machine in automatic assembly line. B. Automatically install the nose bridge, edge banding, forming and welding. C. Automatically printing logo, cutting ear straps, ultrasonic welding. D. Automatic folding, welding, cutting, leveling and shipping.
Plasma/Flame cutting machine controller Famous Brand in China CNC industrial field Easy operation and multiple functions Online technical supports
Purpose and characteristic: This sterilization machine can quickly kill 99% bacteria and viruses, including: influenza, hepatitis virus, e. coli, golden yellow staphylococcus aureus, bacillus subtilis variant spore and various black mildew source body, the allergy source, to the daily life of people to provide a safe environment, especially suitable for tableware, food, cosmetics, Chinese herb, and public goods, children's toys and other items such as surface fast disinfection and deodorization in addition to taste
6 Axis Robot is designed for Spraying purpose. Full spray package can be provided to our users.
MV800 Motorcycle is looks like Harley style, comfortable seat with strong engine with 800cc, V-cylinders. feel pleasure with your holiday traveling in a great weather.
CNC 4 Roll Plate Rolling Machine applications: This machine is suitable for the bending and forming of metal plates. It can roll round, arc and conical workpieces within a certain range. It has the function of pre-bending the end of the plate, the remaining straight edge is small, and the work efficiency is high. It can be used on this machine. Rough leveling of sheet metal. It is widely used in petroleum, chemical industry, boiler, shipbuilding, metal structure and machinery manufacturing industries.
TR-X9 is a fanless and full aluminum designed small PC equipped with 2 LAN and 2 HDMI ports. The new 2.5'' Hard Disk drawer design allows quicker re-configure SSD/HDD,and the optional Intel dual/quad core processor delivers high PC performance. TR-X9 is good choice for a PC using at home/ office, as well as a display terminal for commercial use.
900CC Awsome Street motorcycle MV900S is coming soon ! Looking for global dealers from worldwide !
TR series servo energy-saving injection molding machines: Precise clamping system, outstanding efficiency, efficient servo drive, all meet all requirements. Focus on customer products, provide al complete set of technical solutions for customers, and create better investiment returns and customer experience for global customers.
Similar your real girlfriend Customized body shape, face appearance and eye color options etc. Warm Body function Fluently English and Chinese speaking
TRLINE-N95 production line to produce products below: Face mask for hospital N95 face mask Face mask for Coronavirus Disposable medical mask
Controller Battery: 3.7V 300mA Motor: 1806 brushless motor Item name: SJRC F11 RC brushless drone Charging time: About 3.5h Flight time: About 25 mins GPS/GLONASS double mode: YES 5G Wifi image transmission distance: 400-500m (Free interference and no occlusion) Camera: 90deg adjustable angle by remote controller
1, Conditions of use：380V/3phase/50HZ; 2, Materials used:PP meltblown special material；melt fat 1500 3, Product specifications：L=420mm, δ=0.008～0.1mm 4, Extrusion output:25～50Kg/H varies according to material,thickness and process.
The TRE500S body joint is made of high-strength aluminum to ensure the machine's high strength, high speed, high accuracy and high stability.
Installations: Greater flexibility, more stable performance, and lower energy consumption; Maximum throughput with high-speed performance; Long working time; Fixed automation; Robot Applications: Such as Grinding and polishing, Cutting, grinding, deburring, cleaning, polishing, water cutting and other processing functions.
TR5-7CO is a 6-axis vertical multi-joint Cobot with an effective load of 5KG. It can adapt to a variety of different application scenarios, and can customize five or six axes according to customer needs. TR5-7CO Cobot is easy to understand and has a solid structure to meet the requirements of customers for product diversification, high efficiency, and product production.
Quiet Industrial DC Fan features: *Copper wire motor *Super quiet bearing * Low power consumption and environmental protection * Flame retardant material
Similar your real girlfriend Customized body shape, face appearance and eye color options etc. Warm Body function Fluently English and Chinese speaking
Bulletproof glass can be approved from the weapon model below: 1, M14 Automatic Rifle / 7.62mm NATO bullet 2, F56 submachine gun / 7.62mm steel core bullet 3, F79 light submachine gun / 7.62mm steel core bullet 4, F54 pistol / 7.62mm steel core bullet
2021 Version of TR-FL080, the SRC-based laser SLAM ground-mounted smart forklift, has made a number of improvements on the basis of the second generation, with a small size and strong load capacity; it is equipped with the SRC series core controller, which achieves high-precision positioning of ±10mm ;And cooperate with infrared sensors, 3D obstacle avoidance, safety edge and other sensors for safety protection, which can ensure the safety of personnel and goods during the operation of the intelligent forklift, and can flexibly complete the transportation of goods in narrow spaces, which is the realization of intelligent factory logistics. The "carrying artifact".
*Multi-degree of freedom bionic arm *Voice interaction + face recognition *Developer Eco + Extension Interface *3D SLAM indoor construction map navigation *Omni-directional obstacle avoidance strategy
Wastewater Treatment Equipment Ranges: 1. Removal of suspended solids in wastewater after biochemical treatment. 2. Solid-liquid separation in industrial process ①Separation and washing of slurry in hydrometallurgy ②Filtering of tungsten smelting wastewater before separation ③Solid-liquid separation of magnesium hydroxide slurry ④Solid-liquid separation of coal mine water. 3. Pretreatment of reverse osmosis or nanofiltration process.
AUBO-i16 collaborative robot has a payload of 16kg. Max. length 1130.5mm, Max. Reach 967.5mm. Large payload, small size.
Robot Street Sweeper Specification: Cleaning width: 1900mm Volume: 230L Maximum travel speed: 60kg/h Water tank capacity: 80L Maximum cleaning capacity: 13000 square meters/h Cleaning efficiency: 3600 square meters/h Working noise: 56-70db Battery cruise: 6 hours
ADTECH 3-6 Axis dispensing control system for high-precision motion control system.
ADT-8960 is 6 axis PCI control card, it can support random 2,3,4,6 axes linear interpolation.And adopt advance technology, the frequency error is less than 0.1%.
Smart Painting Robot Applications: This product is widely used in the spraying of toilet, washbasin, washbasin, squatting pan, mop pool, urinal, standing basin, washstand and other sanitary ware products, and fully meets its glazing needs.
Our manufacturer's research and development, design and produce machines of gloves,balloon and condom. Mainly in balloon printing machine,production line for glove,glove half-full dipping,latex condom dipping and latex balloon dipping,glove dotting and printing machine, surgical glove out wrap/inner paper packing machine,condom packing machine and other relevant supporting equipment products.
The SCARA multi-joint manipulator belongs to the company's high-precision, high-speed, and high-performance robots. This product is mainly aimed at the application of robot lock screws in the 3C industry. This product is developed based on the previously developed SCARA robot body with 600 arm lengths. A special non-standard robot for locking screws with visual positioning function.
OEM Electric mask: Power (W): 0.5W Voltage (V): 5V Power Source: Battery, usb, Electric Materials: PP and Silicone Function: Air purifier and anti-fog smoke virus
ADTECH 6 axis milling machine controller Famous Brand in China CNC industrial field Easy operation and multiple functions Online technical supports
Product Type: handheld game console: Game type: RPG role-playing, ACT action game, AVG adventure game Operating system: liunx RAM: 16G Interface type: USB Video/audio interface: HDMI Connection method: wired Additional features: MP3 music player Video game classification: Fever, Elite, Hardcore
Intelligent cruise explanation automatically leads the way: *Adopt advanced wireless laser navigation technology to quickly scan and build real-world maps. *Automatic cruise explanation, accurate location *Voice activation automatically leads the way to the designated location *More than 70% coverage area, panoramic road conditions, safe obstacle avoidance.
Abdominal Toning Belt features: * Smart phone controls * EMS IC chip * 8 difference mode * 50 levels * Auto stop by 25 minutes * One button operation
Robot Applications: ——Material handling and palletizing Greater flexibility, more stable performance, and lower energy consumption; Maximum throughput with high-speed performance; Long working time; Fixed automation.
MIG/TIG welding robot can be worked as radius on 1850mm, suitable for chairs or furnitures welding !
The six-color bending offset printing machine adopts a reasonable structure and high-quality accessories to ensure the machine is durable, practical, high-quality printing, high production efficiency, and easy to operate. This machine is letterpress printing, mainly suitable for surface printing of cups and bowls
*Pure water production capacity: 4T/H *Length of drying tunnel: 15M * Oven temperature: up to 140℃ * Heating power: three-phase 380V * Control power supply: single-phase 220V * Mechanical speed: 5-20m/min * Installed capacity: 400KW
Semi auto labeling machine applications: It can be used for labeling various specifications of cylindrical objects, such as red wine bottles, beverage bottles, xylitol, cosmetic round bottles, medical test tube oral liquids, etc., equipped with full-week/half-week labeling, and labeling functions on the front and back of the circumference; can be equipped Ribbon printers, inkjet printers, and labeling machines print production batch numbers and other information at the same time.
Main Products: Commercial robots, teaching robots (teaching robots for universities, middle schools and elementary schools), collaborative six-axis robots, photography and video robots, beauty and body robots, milk tea robots, auto parts, elevator parts, auto parts inspection tools, precision hardware, medical equipment accessories etc.
Arm Length: 2300mm; Payload: 50kg; Suitable for heavy payload palletizing job; Easy operation by our teach pendant.
Similar your real girlfriend Customized body shape, face appearance and eye color options etc. Warm Body function Fluently English and Chinese speaking
【Model】TR10165B-310 【Motion type】Multi-joint type 【Rated load】165kg 【Motion radius】3100mm 【Weight】1600kg 【Number of axes】4 axes
The system of latex balloon dipping machine realized communication controlled by humanity-machine interface. They raise the digitized level of the system having it steady. Industry level modularization design, simple humanity-machine dialog and main speed and every section temperature can be shown in the screen.
Six degrees of freedom, weight 33.5kg, load 12kg Working radius 1304mm Repeat positioning accuracy ±0.03mm Maximum speed 3.2 m/s Typical power 500W Protection grade IP54
Robot Features: Large working space High repeat positioning accuracy Stable performance Cycle speed faster Good general performance Modular mechanical structure design
Relying on scientific management system, convenient transportation conditions, strong production capacity, testing methods and perfect sales network, our factory manufactures series of products with high quality, low price and beautiful appearance to serve various industrial and mining enterprises.
AA Battery Standard Size: Diameter(D) mm 14±0.5 Height(H) mm 50±0.5 Weight(W) g 14.1±0.5 AAA Battery Standard Size: Diameter(D) mm 10.1±0.2 Height(H) mm 44.5±0.5 Weight(W) g 7.1±0.2
Jumping stilts is defined mainly by a flat spring controlled upon deformation, so that the result is a straight movement relative to the ground. Main material: Aluminum alloy, Engineering plastic Spring: Fiberglass;
Sanitary Napkin production line: Customized specification; PLC control system,Operating on the touch screen, Configure HDTV monitor. Germany BST automatic web guide system (optional).
3D Printer Model: TR-6610D Applicable raw materials: pla Printing accuracy 0.1mm Molding method FDM Layer thickness 0.05-0.6mm Positioning accuracy 0.001mm Heating plate temperature 110°C Nozzle temperature 0-260°C Movement speed 30-150mm/s Actual power 350W+ Input voltage 220V (V) After-sales service 1 year warranty
Robot Arm Applications: ——Spraying and cutting Stabilize and improve welding quality and ensure its uniformity; Improve productivity, continuous production 24 hours a day; Improve the working conditions of workers and work for a long time in harmful environments; Reduce the requirements on workers' operation skills; Shorten the cycle of product modification and replacement, and reduce the corresponding investment equipment; Can realize batch product welding automation; Save floor space.
The intelligent digital ultrasonic welding system is mainly used in the fields of face mask machine, medical protective clothing making, diapers, non-woven bags making machine, non-woven clothing stitching, trademark slitting and nylon band cutting, etc.
Navigation method: Magnetic navigation, Magnetic stripe Control method: Integrated controller Motor: Brushless motor, ≤200W / set Drive method: Differential drive Load method: Latency AGV
Abdominal Toning Belt features: * Smart phone controls * EMS IC chip * 8 difference mode * 50 levels * Auto stop by 25 minutes * One button operation
ADT-8940A1 is high cost effective pci-bus motion control cards. It support linear, arc. interpolation.40 channel input and 16 channel digtial output port. It can be application for cutting machine, engraving machine,laser equipments.
Robot Mechanical Parameters: Overall dimension: 1150(L) x 730(W) x 1138(H) Net weight: 280kg Electrical parameters: Battery voltage: 48V; Battery capacity: 130Ah Working hours for a single endurance: 6-8h Battery type: Lithium battery Performance Parameter: Working speed: Max: 1.3m/s, suggestion: 0.6m/s Cleaning efficiency: 2300㎡/h (typ1288) Cleaning width: 552mm Brush type: Double rolling brush Tank volume: 120L (internal circulation) Working noise: <76dBA
MIG and TIG welding robot for steel, stainless steel and alumium etc. OEM Robot customers are more than welcome !
The DELTA robot is a classic parallel robot configuration. It has the characteristics of three-dimensional XYZ translation and rotation around the Z axis. It has the advantages of fast speed, good accuracy, high reliability, strong ease of use, and low maintenance cost. It is widely used in high-speed sorting and packaging fields.
4 axis Delta Robots/Spider Robots are suitable for food packaging industry. The robot vision system is availiable also !
Ultrasonic Models: 20K2000W; 20K2600W; 15K2600W. for one to 2 line face mask machine high speed one to 1line face mask machine KN95 face mask machine KF94 face mask machine
TR-SBA&TR-SBB Automatic glove dipping lines: Surgical Examinational Disposable Glove Dipping Machine and Glove Packaging Machine TR-SBA for single mold line TR-SBB for double mold line Suitable materials: PVC emulsion\Latex\Vlnyl Main products: PVC/Latex/Vinyl gloves for examination, surgery, disposable glove for household, and beading, straight (powder/ powder-free).
4 Axis Industrial Robots are designed for punching machine, CNC machine feeding applications. OEM customers are more than welcome !
ADTECH QS7 series AC servo drives and motors are suitable for retrofit CNC machines and Linear modules !
Gantry Type Welding Machine can be provided a full solution for massive welding job with regular welding parts. Very easy operation on site.
E-Cigarette features: *Standard test environment: Temperature: -5—42℃ *How to use: Pull the silicone of the atomizer mouthpiece outwards to expose the smoke outlet. Then remove the bottom sticker and start using it. (If the amount of smoke extracted is small, please replenish the battery in time)
Robot Features: Large working space Stable performance Run fast Good general performance Modular mechanical structure design
【Model】TR1005A-099 【Action type】Multi-joint type 【Rated load】5kg 【Motion radius】990mm 【Weight】55kg 【Number of axes】6 axes
* 5 axis laser cutting machine * 1.8G acceleration * Compatible pipe diameter from 6-115mm * Round Pipe, Square Pipe, Rectangular Pipe, Oval Pipe etc. * Laser power from 1kw - 3kw.
High precision desktop robot, soldering robot are designed for electric components production lines such as Samsung, LG, Foxconn and Canon etc.
TIG welding robot is designed for thin metal sheet such as alumium or thin steel.
ADTECH 4 axis SCARA robot arm with high performance and excellent precision.
Product Name: Industrial refrigerators and freezers Types: Refrigeration equipment for cold storage Model number: TR-HTBX120 Uses: This product is suitable for low-temperature freezing test of materials. Dimesion: 590*800*600 Unit weight: 50.0 kg OEM available!
Inspection water proof robot dog TR4D-20 applications: Leading digital industrial solutions, define a new boundary for quadruped robot applications. *Security Inspection *Survey Exploration *Emergency Rescue
Desalination is the use of seawater desalination to produce fresh water. It is an open source incremental technology to realize the utilization of water resources. It can increase the total amount of fresh water without being affected by time, space and climate. The water quality is good and the price is gradually reasonable. It can guarantee the stable water supply such as drinking water for coastal residents and industrial boiler water supply. The process of obtaining fresh water from seawater is called desalination. The seawater desalination methods currently in use include seawater freezing, electrodialysis, distillation, and reverse osmosis. The current reverse osmosis method using reverse osmosis membranes quickly occupy the market due to its simple equipment, easy maintenance and modular equipment, and gradually replace it The distillation method has become the most widely used method.
*Equipped with visual positioning, depth vision camera, lidar *Precise positioning and navigation of walking routes, autonomous planning *Multi-machine collaboration and orderly distribution
Industrial robot manufacturer in China with cheap price ADTECH FR5215 system 5500mm arm length 4 axis hoisting scara robot with AVS vision system. ADTECH is professional in 4-axis Scara robot R&D, producing and service. For reduce products people cost. More and more robot is used on production line.ADTECH scara robot can replace NACHI,TOSHIBA,etc. Japan brand, It is application for PCBA assembly，screwing loading,packing,etc electrical field.
CNC9620 CNC Lathe machine control system Introduction: ADTECH specifically for small and medium sized machine tool manufacturers both in domestic and abroad independent research and development of cost-effective CNC control system. Use ARM high performance CPU and super-large-scale programmable device FPGA, real-time multitasking control and hardware interpolation technology to ensure high efficiency of the system under the um-level precision machining. 256M electronic panel meets variety of large program work pieces. 7 inches color screen, interface can be made of parameter selection in both Chinese and English.
Industrial Delta Spider Robot: 400mm-1200mm working diameter 1-3kg rated payload KEBA teach pendant
Mobile Robot Platform parameters: Curb weight: 70KG Rated load: 85KG Geometric size: 974.16*782.02*364 (mm) The fastest speed: 2m/s Obstacle surmounting ability: 160mm Motor parameters: 4*400W brushless servo motor Communication interface: CAN/232 serial port Climbing angle: ＜30° Turning radius: 360° in place Battery: 48V30AH lithium battery
Inspection four-legged robot dog applications: Facing the application requirements in complex and dangerous environments, it provides intelligent solutions for application scenarios such as firefighting and rescue, anti-terrorism, and anti-explosion.
Compound Hunting BOW PARAMETER: Right handed, IBO 320fps; Axle-to-Axle: 31"; Draw weight: 19-70lbs, Draw length: 19”-30” adjustable,without bow press, Brace height: 7”, Let-off: 80%, Bow weight: 3.95lb
Multi-layer pallet free combination The number of pallets can be switched freely, open pallets Design, single layer load 10Kg, total load can be Up to 40Kg, free to charge and easy to use Noisy environment responds like a stream Equipped with high-definition camera, 6Mic array and operation screen, Support visual, voice, touch screen multiple interactive methods Recognize the way independently, fast and stable Built-in sensors, autonomously plan the optimal route Equipped with lidar obstacle avoidance sensing system More stable delivery
Universal industrial robot is flexible for all kind of applications at the ending of factory. Such as picking and placing, polishing, drilling and spraying etc.
Product Features: Accuracy: 0.1mm Speed: 40-80 bottles/min Bottle diameter: 40-100mm Bottle height: 50-300mm
Equipment Fetures: * High Speed process up to 600pcs/min. * Large payload of Delta Robot by 7kg. * Japanese Panasonic Servo Motors. * Smaller design than other famous brand.
CRP S80 Robot Controller supports upto 8 axis control (pulse type). It's designed for economic robot cabinet to be build up. CRP is good at welding application, so MIG/TIG welding solution can be provided to our customers.
TR10-700-400 is a 4-axis vertical multi-joint robot with an effective punching load of 10KG. It can adapt to a variety of different application scenarios, and can customize five or six axes according to customer needs. TR10-700-400 product is easy to understand and has a solid structure to meet the requirements of customers for product diversification, high efficiency, and product production.
The Inspection Robot uses highly intelligent robot technology and image recognition technology to replace the manual completion of the detection and diagnosis of the equipment operating status in a special environment, realize full coverage inspection of the equipment area, and have multiple functions such as security inspection, environmental monitoring, and smoke sensing. It can effectively reduce potential safety hazards such as fires and theft, alleviate the problem of weak staff on duty, and improve work efficiency.
Collaborative Service Robot Applications: 1, Bar/Pub as a bar tender 2, Production line assistant 3, Demonstration / Showroom
High speed and Reliable Delta Robots supply. It's build up with panasonic servos. Supports vision camera on production lines
This machine can be applied to glass, light guideboard, touch panel and other industries of the coating process. All requirements for precise position requirements can be used.
Automatic glove dipping line features: This machine by PLC program control with automatic and manual modes, its simple operation, small size, and use gloves Roller pull on gloves without any damage. Its normal use and low maintenance costs. Also without gas supply, the machine noise <40dB, safety, energy saving and environmental protection. because machine use full auto counting, which can reduce worker and can glove can be packed immediately, so can save 2-3 workers, which greatly improves production efficiency and reduce production costs, so that is ideal glove manufacturer selection.
SRC-based laser SLAM stacker automatic forklift TR-FL300P, equipped with SRC series core controller, can identify pallets, fork goods accurately, and operate efficiently; and adopts laser SLAM navigation, no reflector, easy to deploy; fuselage 360 °Comprehensive protection + 3D obstacle avoidance to improve the safety of robot operations; the lifting height can be customized, which is a "stacking weapon" in the factory; the maximum load is up to 3000kg, suitable for large factories or warehouses. Load handling, stacking and palletizing scenarios
ABB KUKA Yaskawa Fanuc etc.. industrial Robot arm 4 axis and 6 axis 6kg to 2000kg payload Within 5 years old
A professional design, manufacture all kinds of gloves equipment production enterprise, its excellent product quality and first-class service to win the customer high praise and recognition. Brings together various excellent equipment research and development personnel and chemical formula of talent, and with a number of well-known domestic and foreign manufacturers, companies, universities and research institutions established long-term strategic partnership, committed to the mechanical equipment frontier technology research and development of new products.
This machine is a fully automatic one-to-one KF94 (willow-leaf, fish-shaped) mask machine; the loading rack is connected with a main body machine and an ear strap welding machine; the loading rack is responsible for installing and conveying fabrics, and the main body machine is responsible for The mask body is formed and welded, and the earband machine is responsible for welding the earband. The whole line adopts PLC, touch screen control, the main conveyor belt adopts single-phase motor conveying, stepping motor turns the film, precise transmission, stable control, and adjustable speed. The welding adopts ultrasonic, which is stable and efficient.
Capacity: 40-50pcs/min Power: about 11kw Weight: about 2000Kg Product size error: ±1mm (excluding raw material error)
Easy to operate: Force-free techingeffectively reducesdebagging time and learning cost.PortablePC,friendly man-machine operation interfacemakes the robot easier to use. Modularity: All-in-one module of reducer,motor,encoderand drive,which is convenient for quickdisassembly. Quick deployment: 3kg in rated load with 13kg in weight.Light-weight installation and flexible deployment.
Industrial 6 axis robot arm training platform training targets: *Usefully running 6 axis robot arm by program *Usefully for I/O control with robot gripper *Usefully for connection with PLC *Usefully for daily maintenance
laser cleaning machine TR-CL2000 features: 1. High-power fiber laser laser cleaning machine 2. Non-contact cleaning, no damage to the parts matrix 3. Precise cleaning, can achieve precise location, precise size, selective cleaning 4. The operation is simple, just power on, and it can be hand-held or cooperated with the manipulator to realize automatic cleaning. 5. The cleaning effect is very high and saves time. 6. The laser cleaning system is stable and requires almost no maintenance.
Robot Features: Large working space Stable performance Run fast Good general performance Modular mechanical structure design
Tandem Press Line Description: 1. The use of frequency conversion speed regulation can flexibly match the production speed. 2. Two optional modes: continuous conveying mode and step conveying mode. 3. The production line can be stopped through the conveyor line, which is convenient for customers to use. 4. The belt is made of wear-resistant material.
【Model】TR1006A-20MZ 【Action type】Multi-joint type 【Rated load】6kg 【Motion radius】2000mm 【Weight】170kg 【Number of axes】6 axes
Power: 100w Pulsed Applicable Material: PVC, Stainless steel, Carbon steel, Aluminum, Stone, Metal. Marketing Type: Pulsed Fiber Laser Cleaner Warranty of core components: 2 years Core Components: MOPA Laser, Professtional Laser Clean Head Dimension(L*W*H): 336*129*400mm Weight (KG): 12.5 KG Laser Frequency: 1-3000kHz Laser output mode: pulse Fiber Cable Length: 5-10m pulse width: 2-500ns Scan width: 300mm adjustable function: laser removal oil / rust / coating Scan Mode: 7 patterns
OEM Scara Robots are designed for the factory with electric components assembling such as Samsung, Foxconn, LG and Canon etc.
*Stabilize and improve welding quality and ensure its uniformity; *Improve productivity, continuous production 24 hours a day; *Improve the working conditions of workers and work for a long time in harmful environments; *Reduce the requirements on workers' operation skills; *Shorten the cycle of product modification and replacement, and reduce the corresponding investment equipment; *Can realize batch product welding automation; *Save floor space. Main applications——Grinding and polishing Cutting, grinding, deburring, cleaning, polishing, water cutting and other processing applications
Applications: ——Material handling and palletizing Greater flexibility, more stable performance, and lower energy consumption; Maximum throughput with high-speed performance; Long working time; Fixed automation.
The high configuration of our Delta Robot ensures with high performance and high cost performance: *By usingimported fromJapan's Panasonicservo motors. *by High precision planetary reducers. *Payload from 1kg to 15kg. *Working Diameter from 350mm-1400mm.
Product Applications: * Industrial Robots vision system * Industrial machines vision system * Defect Products Inspection * Porduct Position Controls * QC Checking for micro products
Terminator 2 Model T800 Red light of eyes T2 collection No removal chip in the head !
The 4 axis industrial robot is designed for palletizing and heavy parts movement
Product Description: The TR-1500V20 stringing machine is an automatic equipment that welds the well-tested cells into strings through interconnection bars, and sorts and collects the welded battery strings. The equipment adopts various advanced automation technologies such as PLC and servo to realize fully automatic processing from battery chip feeding to battery string discharge.
Name: Oil Drum Forklift Brand: OEM Steel plate thickness: fork 8mm Weight: 50kg Maximum lifting speed: 20cm/s Number of casters: 4 Caster Material: Nylon Sheet thickness: 4mm square tube Special industries: logistics industry / loading and unloading teams / factories Load capacity: 500 Fork Length: 90cm
TR600B four axis SCARA industrial robot The robot is a multi-joint four-axis robot with complete independent property rights. It adopts a high-performance controller to control the robot to achieve high-speed point motion, spatial linear interpolation motion, spatial arc interpolation and other functions. It is suitable for transportation, Various industrial occasions such as loading and unloading, spot welding, gluing, etc.
Applications include CNC machining centers, CMM measurement centers, CNC lathes, wire cutting, milling machines, grinders and other equipment, and can be used with various surface treatments according to customer requirements.
1500cc 4 wheel drives 107 horse power 4 cylinders by fuel injection
TR-SBA for single mold line TR-SBB for double mold line Main products: Nitrile/PVC/Latex. gloves for examination, surgery, disposable glove for household, and beading, straight (powder/ powder-free).
Quiet Industrial DC Fan features: *Copper wire motor *Super quiet bearing * Low power consumption and environmental protection * Flame retardant material
What does Robot Puppy do for you? Video surveillance, Visual line patrol, Ultrasonic obstacle avoidance, Self-balance control, Motion detection, Color recognition.
It mainly includes two parts: intelligent mobile platform and automatic killing system. The automatic killing system is under the core control system of the robot. You can use voice to control the killing power, killing range, killing path, killing time, etc.
Fixed Wing Hybrid VTOL Drone main feature: ---HD photo and video evidence collection Equipped with an airborne camera, the UAV can collect evidence of illegal acts from the air to investigate the damaged area, and cooperate with the ground police force to search for the target.
900cc V-twin Cylinders Belt Drives Heavy Cruise Motorbike
Dumpling Machine Specifications Dimension: 3400*2850*2000 Model: ZK-3-SJ Generation rate: 14000/hour Output: 280kg/hour Power: 12.9KW Power: 380V 50Hz(3P)
Metal laser cleaning machine, also known as metal laser derusting machine, is a handheld laser cleaning equipment and a new type of high-tech machine for surface cleaning. It can work without chemical reagents, medium dust and water.
Inspection four-legged robot dog applications: Facing the application requirements in complex and dangerous environments, it provides intelligent solutions for application scenarios such as firefighting and rescue, anti-terrorism, and anti-explosion.
Laser spot welding is the use of high-energy laser pulses to locally heat the material in a small area. The energy of the laser radiation diffuses into the interior of the material through heat conduction, and the material is melted to form a specific molten pool. Laser spot welders (jewelry spot welders) can weld the same or different materials together. TR-PMC series products are improved by introducing advanced German design technology. This series of products adopts ergonomic design and is produced with international first-class accessories. The whole machine is more reliable, more durable, more convenient and more efficient.
Product specification: Length 15m, Height 1.8m, Width 3.2m; Speed: 900 boxes/Hour.
Power phase number: single phase Rated power: 20W Moisture-proof way: open Cooling method: oil-immersed air-cooled Cooling form: liquid/oil immersed Frequency characteristics: low frequency Brand: OEM Winding form: double winding Core form: shell/core shape
*Compact structure, easy for installation and maintenance *PLC control, highly automatic *HMI is easy to operate *Multiple positions are equipped with detecting sensors, which are reliable to detect exceptions to reduce wastes. *Key parts and components use world famous brands for ensuring the stable performance of machine *Stable running and high efficiency
UV Disinfection AI Robot is suitable for the hospitals and public venues. Good in control with the virus such as H1N* and COVID-19 by air media spreading
The operation of the machine is realized through the flashlight door button. The flashlight door has 2-6 buttons, usually the 6-point switch controls the fast up, fast down, slow up, slow down, left and right rotation and the horizontal forward and backward walking of the hoist trolley. Usually within 500kg, it can be equipped with Angmar manual trolley, and the button switch can only be operated up and down. If it is above 1t, it can be equipped with Angmar electric trolley, which can have up and down, left and right, front and rear operation switches.
3D Handheld Scanner Applications: Ø Automobile manufacturing Ø Aerospace Ø Power generation Ø Model manufacturing Ø Casting inspection Ø Construction machinery Ø Design inspection Ø Architecture sculpture
Main business: a variety of high-strength chains; lifting machinery; conveying machinery; mine support products; crane parts and maintenance services Ship chain, green decoration chain, stainless steel chain, bucket elevator-hoist chain, chain hook, hopper, sprocket, plate chain and other accessories, conveying machinery-FU conveyor accessories, chain conveyor accessories, scrapers Plate conveyor accessories, slag conveyors, slag remover accessories, mine support-bolts, anchor plates, W steel belts, anchor cables, anchoring agents and other supporting products. The above products are used in: lifting, metallurgy, coal, petroleum, building materials, cement, electric power, chemical industry, shipbuilding, transportation and greening industries. Non-standard products can be customized according to user needs.
1. RTX3060 6G GDDR6 ultra high performance graphics card 2. The latest tenth generation Core 6-core i5-10400 high-performance CPU 3. Colorful backlit keyboard, 1920*1080 Full HD 144Hz 45% IPS screen 4, 8GB DDR4, 512G SSD mass storage
*Robot advantages: fast speed, high precision *Long service life and stable performance *Strong compatibility and strong flexibility *Simple control and ease of use
The lower limb exoskeleton Robot: The 12-degree-of-freedom lower limb power-assisted exoskeleton robot is fully electrically driven and can run for 5 hours without restrictions. Wearing it can easily carry 50kg and walk.
Easy to operate: Force-free techingeffectively reducesdebagging time and learning cost.PortablePC,friendly man-machine operation interfacemakes the robot easier to use. Modularity: All-in-one module of reducer,motor,encoderand drive,which is convenient for quickdisassembly. Quick deployment: 5kg in rated load with 18.5kg in weight.Light-weight installation and flexible deployment.
The MINEBEE super mini drones are coming soon !!!
Radiation Protection Suit: The whole set consists of: nuclear radiation protective clothing, respiratory protection device, nuclear protective gloves, nuclear radiation protective leather boots, portable moisture-proof drag box.
Cartoning machine, unpacking machine, cartoning machine, carton sealing machine, sealing machine, palletizer, strapping machine, film wrapping machine and assembly line whole plant packaging scheme customization, which can be applied to: food, daily necessities, cosmetics, toys, electronics, Chemical and pharmaceutical, stationery, building materials, hardware and other industries. All series of products are sold all over the country and exported to America, Europe, South Africa, the Middle East, Australia
10KW wind turbine power station main ranges including the body, controller, inverter. Need batteries, solar panels or towers. 10KW wind turbine can be used for TV, lighting, electric fan, washing machine, refrigerator, rice cooker, water pump, air conditioner, and small village lighting.
Similar your real girlfriend Customized body shape, face appearance and eye color options etc. Warm Body function Fluently English and Chinese speaking
The ai robot wife with real skin is similar to your real girlfriend. Customized body shape, face appearance and eye color options etc. Warm Body function Fluent English and Chinese speaking
The MINEBEE super mini drones are coming soon !!!
The MOD mobile collaborative robot itself is an operator that can move autonomously, Timely complete the tasks of multiple different stations in the production line. Using Mecanum wheel drive mode, Realize 360° movement in any direction, and can work flexibly in a small working space, effectively Improve site utilization and production efficiency. By matching rich end-fixtures and visual knowledge Different equipment, which can realize grasping, assembly, sorting, loading and unloading, moving, handling, vision Detection and other functions are more accurate, stable and efficient. Two-arm bionic design, more Close to human operation mode, suitable for a variety of typical work stations that require both hands at the same time.
Cnc Milling 4 Axis Controller In China CNC9640 1.CNC9640 is 4 axis milling/drilling controller 2.CNC milling controller with 7 inch screen 3.can work together with addtional panel and handhold box
Robot applications——Spraying, Material handling and palletizing Greater flexibility, more stable performance, and lower energy consumption; Maximum throughput with high-speed performance; Long working time; Fixed automation.
Equipment Fetures: * High Speed process up to 480pcs/min. * Large payload of Delta Robot by 6kg. * Smaller design than other famous brand.
Mobile Robot Platform parameters: Curb weight: 70KG Max payload: 80KG Geometric size: 974.16*782.02*364 (mm) The fastest speed: 7.2km/hour Obstacle surmounting ability: 130mm Motor parameters: 4*400W brushless servo motor Communication interface: CAN/232 serial port Climbing angle: ＜30° Turning radius: 360° in place Battery: 48V30AH lithium battery
Similar your real girlfriend Customized body shape, face appearance and eye color options etc. Warm Body function Fluently English and Chinese speaking
Robot Features: Large working space High repeat positioning accuracy Stable performance Run fast Good general performance Modular mechanical structure design
1. PLC programmable control system, adjustable speed, visualization of efficiency, accurate display of faults, timely elimination. Adopting brands such as Siemens, Omron and Mitsubishi. 2. The mechanism is upgraded, from the traditional forward push type to the rear pull type mechanism, the space is small, the speed is faster, and the operation is more stable 3. The design is upgraded, the structure is integrated, the compatibility is stronger, the adjustment is convenient, and only 3-5 parts can be replaced
【Model】TR1006A-15MZ 【Action type】Multi-joint type 【Rated load】6kg 【Motion radius】1500mm 【Weight】150kg 【Number of axes】6 axes
Robot arm Applications: ——Material handling and palletizing Greater flexibility, more stable performance, and lower energy consumption; Maximum throughput with high-speed performance; Long working time; Fixed automation
6 Axis Industrial Robots for CNC machines feeding purpose, 15 month warranty would be given !
Auto Foldable Scooter Features: 1. Unique remote control folding design, easy to carry and storage. 2. Electromagnetic brake system ensures safety. 3. Aluminum alloy frame for light weight and strength. 4. 3 folding methods: Remote control/Manual/Electric switch. 5. Equipped with high quality detachable lithium battery. 6. LCD display, power, speed display at a glance.
ADTECH 3-6 Axis dispensing control system for high-precision motion control system.
TR-SBA&TR-SBB Surgical Examinational Disposable Glove Dipping Machine and Glove Packaging Machine TR-SBA for single mold line TR-SBB for double mold line Suitable materials: PVC emulsion\Latex\Vlnyl Main products: PVC/Latex/Vinyl gloves for examination, surgery, disposable glove for household, and beading, straight (powder/ powder-free).
Wall Printer Advantages: The wall painting machine uses unique environmentally friendly pigments, the colors are full and fresh, durable and waterproof. Wall creation does not require a hand-painted master, a picture can be customized, the computer is set up, the painting equipment is self-injected, everyone can operate it, save worry and effort, a large number of libraries as the manuscript, creative ideas, whatever you want, what you see.
Similar your real girlfriend Customized body shape, face appearance and eye color options etc. Warm Body function Fluently English and Chinese speaking
MIG welding robot for steel, stainless steel. Compatible with 1/2 axis Rotator table. Laser seems tracking system is available for this robot !
ADTECH additional panel suitable for 6 axis CNC controller such as CNC4960, CNC9960 etc.
ADTECH CNC9620/4620 2 axis Turning/Lathe Machine CNC control System for CNC lathe and turning system
Feeding → Screw Extrusion → Melt Filtration → Metering Output → Die Head Extrusion → Into the Spinneret → Hot Air Traction → Net Curtaining → Electret Processing → Rewinding
The MOS mobile collaborative robot itself is an operator that can move autonomously, Timely complete the tasks of multiple different stations in the production line. Using Mecanum wheel drive mode, Realize 360° movement in any direction, and can work flexibly in a small working space, effectively Improve site utilization and production efficiency. Through the matching of rich end fixtures and visual knowledge Different equipment, which can realize grasping, assembly, sorting, loading and unloading, moving, handling, vision Detection and other functions are more accurate, stable and efficient.
Adult Diaper machine: Customized specification; 3-shaft drive/Full servo, timing belt and flat belt are imported products, and all the key parts use imported bearings. Germany BST automatic web guide system (optional).
Laser Cutting Machine Advantages: System intelligent alarm Multi-directional abnormal alarm of equipment is directly communicated to the panel, so that equipment failures are known in advance, hidden dangers are reduced, and the efficiency of equipment abnormality investigation is doubled
R1 Robot Features: -Used for water search and rescue, fire rescue, towing and rescue transportation. -Support remote control/local dual control mode -Support one-key return to home, out of control return to home, reverse gear -Support infrared intelligent human detection -Suitable for scenes such as the sea, reservoirs, rivers, lakes, etc.
Oxygen Machine Specification: Customize Production: Yes Extraction Gas type: Oxygen Workign Principle: Compression Processing capacity: 6.7 (m3/h) Dimensions: 355*275*370 (mm) Weight: 7.3-8.3 (kg)
* Delta robots are cost-effective, high-quality and low-cost, can be customized OEM design for customers, and support various visual sensor information; * TRD robot application system is mainly composed of three parts: robot, wire feeding and robot installation frame. The robot consists of a substrate, a motor cover, a rotating shaft, a main robot arm; it is composed of auxiliary mechanical arm and gripper center.
Plug-in machine Features: Mechanical fixing of substrate + visual positioning of Mark points, high precision Fast line change, fast speed, corresponding to various materials Flexible and independent Feeder, strong versatility, easy to replace It can automatically feed components in four packaging methods: bulk, tape, tube, and tray Different corresponding plans can be made according to different customers to meet the requirements of different customers.
SRC-based laser SLAM stacker automatic forklift TR-FL200, equipped with SRC series core controller, can identify pallets, fork goods accurately, and operate efficiently; and adopts laser SLAM navigation, no reflector, easy to deploy; fuselage 360 °Comprehensive protection + 3D obstacle avoidance to improve the safety of robot operations; the lifting height can be customized, supporting a maximum lift of 6M, which is a "stacking weapon" in the factory; the maximum load is up to 2000kg, suitable for large factories or warehouses. Load handling, stacking and palletizing scenarios
GH-CNC820 is 4~6 axes economic type CNC spring making controller, it is specialized to compression spring machine, torsion spring machine. It has 5.7 inch LCD display screen and English application software.
AM600 series medium-sized PLC Applicable industries: High-speed printing equipment, lithium battery winding, high-speed lamination, new energy industry multi-axis bus control production line, coating inspection, packaging, labeling, etc.
Main functions: Press EVA, solar cells, tempered glass, and backing film (materials such as TPT) into a rigid unit under high-temperature vacuum conditions.
Anti drone device is designed for airport control, public safty control etc.
Injection molding machine equipment: Precise locking system, outstanding efficiency, efficient servo drive, all meet all requirements. Focus on customer products, provide a complete set of technical solutions for customers, and create better investment returns and customer experience for global customers.
Mini Drone 2021 Features: *4K dual cameras *15 minutes flying time *Maximum flying altitude 120 meters *Unit weight 0.29 kg *360 degree stunt show
ADTECH 12 Axis CNC Spring Maker Machine Controller is designed for building up the no CAM type spring machines.
Cobot CS63 Parameters: Six degrees of freedom, weight 14kg, load 3kg Working radius 624mm Repeat positioning accuracy ±0.02mm Maximum speed 2.0 m/s Typical power 150W Protection grade IP54
10W Wireless cellphone charger; Alumium material, fast charge as same as by USB cable charging; Iphone, Samsong, Huawei, etc. more than 250 phone models can be supported. CE、FCC、RoHS Certifications.
Technical Parameters: Model TR350PM Film width Max.350mm Bag making length 65-190 or 120-280mm Bag making width 50-160mm Product height Max.40mm Film roll diameter Max.320mm Packing speed 40-230bag / min Power specifications 220V, 50 / 60Hz, 2.8KVA Machine size (L) 4020 × (W) 720 × (H) 1320mm Machine weight 600kg
SAR130 is a 4-axis vertical multi-joint robot with an effective punching load of 130KG. It can adapt to a variety of different application scenarios, and can customize five or six axes according to customer needs. The SAR130 product is easy to understand and has a solid structure to meet the requirements of customers for product diversification, high efficiency, and product production.
1. Aluminium alloy structure is adopted, which is beautiful and firm without rust. 2. Computer PLC programming control, high stability, low failure rate and low noise. 3. Adopt imported servo motor, stepper motor drive, high precision. 4. Photoelectric detection of raw materials to avoid mistakes and reduce waste. 5. The machine adopts heavy-duty casters and cushion foot cups to move and fix, which is convenient and fast to move without shaking or hurting the floor. 6. The model is equipped with a new advanced conveyor belt, which automatically collects products with high accuracy, and only needs to be sorted and packed.
Specifications Compatibility: Outdoor life Features: Waterproof Structures: Monocular Increase: 12X Objective Lenses (mm): 50 Eye lens (mm): 23 Prism Type: BAK4 Net weight / kg): 0.5 Listed day: 05/18/2020
V-cylinder engine classic motorcycle for decent guys. Global heavy motorbike dealers are wanted !
7 Inches color high-resolution screen display punching controller, display system information, rich interface can be made of parameter selection in both Chinese and English.
2 axis rotation table for welding Robots * Payload from 200kg to 1000kg * Table diameter from 400mm to 600mm * Can be customized.
Autonomous navigation, flexible obstacle avoidance, routes, trajectories can be set arbitrarily. Cyclic Sweeping & scrubbing in heavy polluted areas until all areas has been cleaned.
Cobot CS612 Parameters: Six degrees of freedom, weight 33kg, load 12kg Working radius 1304mm Repeat positioning accuracy ±0.05mm Maximum speed 3.0 m/s Typical power 500W Protection grade IP54
MIG and TIG welding robot for steel, stainless steel and alumium etc. Laser seems tracking system is available for this robot !
Metal processing industry: blanking on punching machines, CNC loading and unloading, workpiece grinding, deburring; Electronic products industry: assembly, IC chip testing and handling, spot welding, PCBA soldering, glue application, screwing, plug-in, workpiece polishing; Automobile and motorcycle parts industry: handling, gluing, spot welding; LCD/LED and glass industry: handling of glass plates, assembly of LCM modules, handling of silicon wafers and display screens; Laser industry: spot welding, cutting; Home appliance industry: assembly, handling and screwing of home appliance products; Research areas: student teaching, school research and development.
Best 900CC motorbike in China 2020 !
Equipment Principle: The galvanometer laser welding machine is a perfect combination of the galvanometer motion system and the laser welding machine system. The laser realizes the rapid movement of the laser spot through the oscillation of the galvanometer, so it can achieve high speed of any graphics on the welding plane within the welding range High-precision spot welding and continuous welding.
TRE5-8CO is a 6-axis vertical multi-joint Cobot with an effective load of 5KG. It can adapt to a variety of different application scenarios, and can customize five or six axes according to customer needs. TRE5-8CO Cobot is easy to understand and has a solid structure to meet the requirements of customers for product diversification, high efficiency, and product production.
Similar your real girlfriend Customized body shape, face appearance and eye color options etc. Warm Body function Fluently English and Chinese speaking
*Compact structure, easy for installation and maintenance *Full Servo System, speed is adjustable *PLC control, highly automatic *HMI is easy to operate *Multiple positions are equipped with detecting sensors, which are reliable to detect exceptions to reduce wastes. *Key parts and components use world famous brands for ensuring the stable performance of machine *Stable running and high efficiency
2 Axis Punching CNC Controller support multi-language option,with CAM template guide edit function, easy to use. Support CAM file resolving process.
Robotic Exoskeleton Features: Through the support of the exoskeleton robot, the moment generated when the human body bends forward and leans forward is offset by the action of the thighs and buttocks, so as to relieve the stress on the waist, reduce fatigue and protect the spine.
Intelligent cruise explanation automatically leads the way: *Adopt advanced wireless laser navigation technology to quickly scan and build real-world maps. *Automatic cruise explanation, accurate location *Voice activation automatically leads the way to the designated location *More than 70% coverage area, panoramic road conditions, safe obstacle avoidance.
TR-FVP380 industrial flexible vibration plate is a star product developed, produced and sold by our R&D. It breaks through the material jamming, abrasion material, and the feeding problem of special-shaped parts of the traditional vibrating plate.
Water drone with camera: *4 working hours *Water depth 30 meters *Fish finder device *VR glasses supports
1) 4-axis CNC milling Center 2) 7.0 inch color LCD display screen 3) New design model 4) ATC and macro function
Laser SLAM Small Stacker Automatic Forklift TR-FL140: SRC-based laser SLAM small stacker automatic forklift, equipped with SRC series core controller inside; using laser SLAM navigation, no reflector, easy to deploy; pallet identification, accurate forklift; flexible scheduling, can be seamlessly connected to the scheduling system ;Slim body, small turning radius, suitable for narrow channel applications; 360° three-dimensional safety protection with 3D obstacle avoidance, safety touch and other sensors, which is the only one for the handling, stacking, stacking and other work requirements of Sichuan-shaped pallets choice.
Electron Microscop Features: * LED ring light source, dynamic adjustment * Automatic edge finding * Automatic circle finding * Picture save and export * Data save and export * Zoom without blur
6 Axis Desktop Robot is designed for electric components assembling and CNC machine feeding etc.
Motorbike Dimensions: 2050*620*1160（mm） Gross Weight: 200kg Designed Speed: Up to 120km/h Motor input power: 72V 5000W
TR5-850 is a 4-axis vertical multi-joint robot with an effective punching load of 5KG. It can adapt to a variety of different application scenarios, and can customize five or six axes according to customer needs. The TR5-850 product is easy to understand and has a solid structure to meet the requirements of customers for product diversification, high efficiency, and product production.
Six degrees of freedom, dead weight 17.5kg, load 6kg Working radius 914mm Repeat positioning accuracy ±0.03mm Maximum speed 2.8 m/s Typical power 250W Protection grade IP54 Collaborative Robot is designed for safety concept. Human and Robot can be working at same production lines together.
E-Cigarette features: *Standard test environment: Temperature: -5—42℃ *How to use: Pull the silicone of the atomizer mouthpiece outwards to expose the smoke outlet. Then remove the bottom sticker and start using it. (If the amount of smoke extracted is small, please replenish the battery in time)
【Model】TR1030B-185 【Action type】Multi-joint type 【Rated load】30kg 【Motion radius】1850mm 【Weight】230kg 【Number of axes】4 axes
AI Coffee Robot Specifications: Robot weight: 72KG Base size: 650mm in diameter Movement range: 750mm Clamping type: mechanical parallel clamping Maximum movement speed of the end of the robotic arm: 1m/s Repeat positioning accuracy: ± 0.1mm Degrees of freedom: 12+2 Clamping payload: below 3KG Input voltage: AC 100-240V Interface: RJ45x2, HDMIx1, USBx4 Programming method: PC/mobile graphical interface/Python/C++/ROS low-level interface
The high configuration of our Delta Robot ensures with high performance and high cost performance: *By using imported from Japan's Panasonic servo motors. *by High precision planetary reducers. *Payload from 1kg to 15kg. *Working Diameter from 350mm-1400mm.
Electron Microscope TR-MS8001 is widely to be used: Such as microscope for PCB board inspection and QC department. Also University Class etc.
The main functions of the Sanitation Robot: 1, Intelligent identification 2, quick positioning 3, Accurately grab Garbage sorting, robots can identify different types of garbage for sorting and put them in different garbage bins
Graphene Carbon Crystal Geothermal Blanket Electric Heating Carpet Geothermal Pad, Nordic Minimalist Style, With Temperature Controller, Perfect For Cold Winters, Power 500W-2000W.
Robot Applications: ——Material handling and palletizing Greater flexibility, more stable performance, and lower energy consumption; Maximum throughput with high-speed performance; Long working time; Fixed automation.
High Quality AC Servos for Robot build up or retrofiting CNC machines etc. OEM available to our customers, ac servo driver, ac servo controller
ADULTS MODEL MOONJUMPER: Aluminum alloy Fram with a half plastic pedal; Movable pedals; Loading body weight : 50-70KG, 70-90KG; Colour: Black, blue, yellow, gray Packaging: 1 pair/ box packaging Net weight: 7KG
The autonomous mobile robot TR-Max600L based on visual perception has a more dexterous body and can move freely in small spaces to meet the needs of all-scene operations. Support low obstacle and dynamic obstacle detection to meet the needs of people and vehicles mixed operation. Unlock more application scenarios through a variety of bodywork modules.
Chengying——Ultraviolet disinfection robot Sterilization is efficient, safe, and pollution-free Signify UV-C UV light source, new coronavirus (COVID-2019) The inactivation rate is as high as 99.9999% According to the research of the authoritative research institute (NEIDL) in the United States, the virus has been exposed to UV-C for a few seconds. Cannot be detected
Product Features 1. The cold generation aerosol generator is used to generate continuous and stable aerosol particles, and the filling of the aerosol is simple and convenient. 2. Use two sets of high-precision aerosol particle detection sensors to measure the upper and lower chambers simultaneously. 3. Configure the salt particulate aerosol generator. 4. Equipped with aerosol particulate static neutralization device. 5. Configure high-precision digital gas flow sensor to accurately measure gas flow. 6. Configure industrial-grade temperature and humidity sensors to accurately measure the ambient temperature and humidity in real time. (Test condition: 25 ± 5 ℃ 30 ±10% RH) 7. 10 inch touch screen, the operation is simple and clear. 8. Pneumatic fixture, easy to change samples. 9. Pumping and exhausting integrated silent vacuum pump, no external air source needed. 10. High-precision pressure gauge and flow regulating valve can adjust aerosol concentration. 11. Micro printer can print detection data. 12. Intelligent configuration such as leakage protection, overload protection, power-off preservation, etc., effectively protect the safety of use. 13. Special test software can be connected to the computer.
EDU Robot Applications: Commercial robots, teaching robots (teaching robots for universities, middle schools and elementary schools), collaborative six-axis robots, photographic camera robots, beauty and body robots, milk tea robots, auto parts, elevator parts, auto parts inspection tools, precision hardware, medical equipment accessories, etc.
This equipment is a high-quality product developed by ourselves according to market demand after learning the advantages of European models. Mainly used for packaging medical disposable nitrile/latex gloves. Continuous model, easy to operate and good stability. Newly improved air blasting device, the finished product is smooth and beautiful.
Universal Industrial Robot-UIR series robot is introduced for picking and placing, CNC machine feeding, spray and drilling applications !
Electric push forklift features: Brand: OEM Steel plate thickness: fork 8mm Weight: 50kg Maximum lifting speed: 8cm/s Number of casters: 4 pc Caster Material: Nylon Plate thickness: 4cm Special industry: logistics industry / loading and unloading team / factory Load capacity: 500kg Fork Length: 90cm Model: TR-C01
TH08R Spring Control System is a multi-functional, economical embedded numerical control system developed by Adtech, it's for 2-4 axis universal machine, spring compression machine, and spring torsion machine.
High quality 6 axis Robot 50kg payload; Easy operation for ending users !
TRE06P 6 axis educational robot can be used for high school, robot engineer training school purpose.
Baby Diaper machine Standard specification: 380x280 420x320 480x320 520x340; *PLC control system,Operating on the touch screen,Configure HDTV monitor; *Germany BST automatic web guide system (optional).
Delivery Robot Features: Body length/width/height: 3650*1560*1950mm Vehicle equipment quality: 770kg Maximum load: 1000kg Gradeability (no load): 20% Maximum speed: 30km/h recharge mileage: 100km Minimum operating temperature: -10℃ Maximum operating temperature: 50℃
Solar Battery Power Bank features: Category: Solar Power Bank Brand: OEM Battery type: soft pack Cell type: polymer lithium ion battery Shell material: plastic Function: Solar Color: orange, blue, green, black Power capacity: 99000mA Conversion rate: 90 (%) Charging power: 5W
Inspection four-legged Mini type of Robot Dog applications: Facing the application requirements in complex and dangerous environments, it provides intelligent solutions for application scenarios such as firefighting and rescue, anti-terrorism, and anti-explosion.
TR800B four axis SCARA industrial Robot: The robot is a multi-joint four-axis robot with complete independent property rights of LBD. It uses a high-performance controller to control the robot to achieve high-speed point motion, spatial linear interpolation motion, spatial arc interpolation and other functions. It is suitable for handling, loading and unloading. , Spot welding, gluing and other industrial occasions.
Features Easy operation Best configuration with high performance Long arm length suitable for wide places Max payload 10kgs Fast speed with 0.43S cycle time High precision up to ±0.015mm
Mini Electric Forklift Introduction: Smart Forklift is designed to lift standard pallet with 500kg load capacity and 3000mm lifting height. Mini Electric Forklift is an ideal facility to load/unload goods in stacking warehouses, super-market, workshops, production lines or handle goods on/off trucks, containers, etc
The high configuration of our Delta Robot ensures with high performance and high cost performance: *By using imported from Japan's Panasonic servo motors. *by High precision planetary reducers. *Payload from 1kg to 15kg. *Working Diameter from 350mm-1400mm.
Similar your real girlfriend Customized body shape, face appearance and eye color options etc. Warm Body function Fluently English and Chinese speaking
Daily capacity about 100,000 pcs Fully Automatic mask production line by 1 operator Easy HMI by English version
AUBO-i5FB collaborative robot can meet the needs of lightweight operations. Payload 5kg, Max. length 1008mm, Max. Reach 886.5mm. Wide application range, rich configuration, the end can realize ±360°rotation.
Engine:4 Stroke; Seats:3; Horsepower:> 300hp; Battery ：12V, 36A 4 Cylinders; Color:Optional; Product Size:3100 * 1200 * 1100MM Maximum load:200kg; net weight:300kg; engine displacement:1300CC Maximum power:63KW(6000RPM); Single package size: 31X12X11 cm Single gross weight:20.000 kg; Maximum power：63KW(6000RPM) Maximum torque：11Nm(4000rpm); Lubrication system Dry oil Cooling system Water cooling double loop; Start method Electric start ECU Fuel tank capacity：35L; Oil amount ：3.5L; Starter motor：380W
Amphibious UTV features: Hull material: fiberglass Model: TR-AUTV04 Specification: 1500cc Air pump: yes Maximum number of occupants: 2 Maximum load: 200kg
Dumpling Machine Specifications Dimension: 3400*2850*2000 Model: ZK-3-SJ Generation rate: 14000/hour Output: 280kg/hour Power: 12.9KW Power: 380V 50Hz(3P)
Anti drone device is designed for airport control, public safty control etc.
Working Radius: 400mm Payload: 1.5kg Repeat accuracy: 0.02mm Drag teaching system Anti-collision function
Please read on, stay posted, subscribe, and we welcome you to tell us what you think.
IPv6 network supported 粤ICP备2021036697号-1
Online service
4000988557
sales1@troysupply.com sales2@troysupply.com
gfreex@hotmail.com
Felix
8936906
Troysupply_com