
Industrial 6 Axis Robot Arm Training Platform for School and Engineer Training Centers
The TRE500S-TP is a robot arm for STEM labs / vocational training. Key specifications: Axes 6 axes. Lead time is 15 days; pricing is quoted per configuration. Certifications: CE documentation on request.
- Model
- TRE500S-TP
- Axes
- 6 axes
- Category
- Education Robots
- Lead time
- 15 days
What This Platform Is For
Industrial 6 axis robot arm training platform training targets: *Usefully running 6 axis robot arm by program *Usefully for I/O control with robot gripper *Usefully for connection with PLC *Usefully for daily maintenance
Commercial Terms
| Quotation | Priced per configuration — reply within 48 hours |
|---|---|
| Lead time | 15 days |
| MOQ | 5 units |
| Origin | China |
| Port of loading | Shenzhen, China |
| Incoterm | FOB Shenzhen / CIF on request |
| Payment | 30% deposit, 70% before shipment |
| Warranty | 24 months standard, 36 months optional |
Product Details
Application notes, construction drawings and video from the TROY engineering file — the same documentation shipped with the quotation.
Instruction of six-axis robot training teaching platform

First: Introduction
This robot teaching and training workstation is based on a robot, equipped with corresponding peripheral modular accessories, mainly including: industrial assembly line, palletizing handling, welding track module, material clamping, positioning pin, vacuum suction and detection.

Third: Instructions for each functional module (1)

Instructions for each functional module (2)

Fourth: Description of the action flow of each functional module
4.1 Multi-function fixture

4.2:
Industrial transmission belt
Operation process description: the cylinder pushes the round block and falls
onto the conveyor belt, the belt transfers the round block to the front baffle
position, the sensor senses that the round block is in place and sends a signal
to the PLC, and the PLC controls the belt to stop the transmission movement
Move to the top of the round block and take it.

4.3:
Palletizing platform
Operation process description: The vacuum sucker sucks the triangle into the
square block. Then suck the circle into the triangle, and then put it back to
the original position.

4.4:
Needle and arc welding track simulation
Action flow description: The manipulator moves the arc welding simulation
column (laser pointer) to the Z-shaped trajectory, and the manipulator controls
the column to walk along the trajectory.

4.5:
Cube gripping
Action flow description: The robot moves the wide cylinder gripper to the top
of the block, descends and clamps the block to the specified position.

Fifth:
Button description
Emergency stop: Control the robot to stop (press it to stop, turn it on and
press the start button to continue following the program.) Power: Control the
robot power management. Start: Control the robot to move according to the
program. Zero return: control the robot to return to the programmed zero
position.

Sixth:
Description of control wiring board
Through this controller, the communication between the robot and the PLC can be
easily realized, and at the same time, the wiring method and skills can be
understood intuitively. Through the connection of various input points, the
construction of various settings can be quickly realized, which is convenient
for learning and safe.

Seventh:
Repair and maintenance
One: Please turn off the main power supply before repairing the equipment.
Non-professionals should not open the power box.
Two: Please clean the work surface and turn off the main power and air source
after each use.
Three: Before operating the equipment, please pay attention to the environment
within the robot's movement radius to avoid safety accidents!


Full Technical Data
| Model | TRE500S-TP |
|---|---|
| Axes | 6 axes |
| Category | Education Robots |
| Lead time | 15 days |
Values are nominal at 20 °C. Download the datasheet for cad models, torque curves and controller I/O maps.
Where It Runs
Sized and commissioned by TROY engineers.
Sized and commissioned by TROY engineers.
Sized and commissioned by TROY engineers.
Sized and commissioned by TROY engineers.
Buyer Questions
What are the key specifications of the TRE500S-TP?
Axes: 6 axes. A full datasheet is available on request.
What is the lead time and MOQ for the TRE500S-TP?
Lead time is 15 days; MOQ is 5 units.
How is the TRE500S-TP priced?
Pricing is quoted per configuration, including tooling and freight where applicable.
Get a Priced Proposal for TRE500S-TP
Include the part, target rate and destination port. An engineer — not a chatbot — replies within 48 hours.
Same Category
Educational Cobot
Robot 900mm Working Radius 6 Axis Robot
Educational Robot Arm 800mm 6 Axis Robot
Reviewed by TROY Engineering · . Specifications are re-checked against the supplier datasheet at every quotation.