Machine Tending
Machine tending robots raise spindle utilisation from 55–65% to 85%+ by removing load/unload idle time. A cobot cell is usually enough for one or two machines; a 6-axis cell is better above 8 kg parts.
CNC Machines Sit Idle While Operators Load Parts, and Night Shifts Are Hard to Staff.
A robot, a double gripper and a drawer or conveyor buffer, integrated with the machine's door and program signals.
- Cobot or 6-axis, 3–30 kg parts
- Double gripper for zero idle time
- Door and program handshake
- Lights-out operation with a buffer
Short Answer
Machine tending robots raise spindle utilisation from 55–65% to 85%+ by removing load/unload idle time. A cobot cell is usually enough for one or two machines; a 6-axis cell is better above 8 kg parts.
What Changes the Price
Recommended Platforms
Shortlist from the catalogue; all prices are FOB Shenzhen.
Not sure which one? Send the part drawing and rate — we return a cycle estimate within 48 h.
JAKA Zu 12 Collaborative Robot, 12 kg Payload
Yaskawa GP8 6-Axis Robot, 8 kg Payload
CS Series 12 kg Cobot with Force Control
Buyer Questions
Will it work with my CNC brand?
Yes — we interface via dry contacts or the machine's PLC; typical integration is 2–3 days.
How many machines per robot?
One robot can serve two machines if the cycle times overlap; we model it from your part times.
What about swarf and coolant?
The arm is IP54/IP67 rated and the gripper uses sealed air cylinders.
ROI Estimate
Illustrative only. Excludes maintenance, financing and ramp-up.