Skip to content
Sales engineers online · 09:00–21:00 CST Bao'an, Shenzhen, China
Solutions · Palletizing

Palletizing Automation

Palletizing automation replaces 2–4 operators per shift and typically returns the investment in 8–12 months at 1,000+ cartons per shift. The right arm size is driven by case weight and pallet rate, not by the robot catalogue.

The problem

Manual Palletizing Is the Bottleneck at the End of the Line, and Injury Rates Rise with Case Weight.

Size the arm from case weight × rate × pattern, then standardise the gripper so a second SKU needs no new tooling.

  • 30–800 kg payload, 1.8–3.2 m reach
  • Vacuum, clamp or bag gripper
  • Barcode-driven pattern editor
  • Two- or four-pallet base rails

Short Answer

Palletizing automation replaces 2–4 operators per shift and typically returns the investment in 8–12 months at 1,000+ cartons per shift. The right arm size is driven by case weight and pallet rate, not by the robot catalogue.

30–800 kg payload, 1.8–3.2 m reachVacuum, clamp or bag gripperBarcode-driven pattern editorTwo- or four-pallet base rails
Sizing

What Changes the Price

Payload
30–800kg
Case weight × 1.3 for acceleration
Reach
1.8–3.2m
Far pallet corner + 150 mm
Rate
900–1,800/h
Cycles per hour, sustained
Payback
8–14mo
Two-shift operation, 1,000 units/shift

Recommended Platforms

Shortlist from the catalogue; all prices are FOB Shenzhen.

Not sure which one? Send the part drawing and rate — we return a cycle estimate within 48 h.

FAQ

Buyer Questions

How do I choose payload?

Take case weight × 1.3 for acceleration, then check the reach at the far pallet corner.

Can it handle bags?

Yes — a bag gripper with a settling plate handles 25–50 kg bags at 900–1,200 per hour.

What floor space is needed?

A 30 kg cell fits in about 12 m²; a 165 kg cell needs 28–35 m² including fencing.

ROI Estimate

Simple payback—

Illustrative only. Excludes maintenance, financing and ramp-up.

TROY AssistantSales engineer · replies in seconds
Hi — I’m TROY’s sales engineer bot.
Tell me what you need to automate: part weight, reach or cycle time is enough. I answer in your language and can put you in front of a human engineer in 48 h.
No prices published — quotation per configuration within 48 h · quote form