Skip to content
Sales engineers online · 09:00–21:00 CST Bao'an, Shenzhen, China
Company

A Robotics Supplier That Commissions What It Sells.

Founded in 2017 in Shenzhen, TROY runs 14 product lines across industrial robots, cobots, mobile robots, automation equipment and special projects — with subsidiaries in TROY CAS · TROY Vietnam (Hanoi).

We are not a marketplace. One team sizes the robot from your part, builds the fixture, writes the CE file and stands next to the machine until it runs at rate.

CE file with every cell FAT before shipment Spare parts held 7 years Quotation within 48 h
Founded
2017
Bao’an, Shenzhen
Product lines
14
Under one supply chain
Catalogue
551
Published products
Group
3
Companies · 2 countries
The company

From Export Agent to the Team That Signs the FAT.

TROY started in Bao’an in 2017 as an export and sourcing arm for Chinese robot and automation factories. The work was simple: find the buyer, match the machine, ship it. That model also made its own flaw plain — a machine that arrives without an engineer is a risk the buyer carries alone. So the company moved up the chain, from moving boxes to owning the outcome.

Today we specify the robot from the part, design the fixture, build and wire the cell, write the CE and risk-assessment file, run the acceptance test on the customer’s part and commission on site. Fourteen product lines and 551 published products sit underneath that discipline: industrial arms from 6 to 800 kg, cobots, AMRs, exoskeletons, CNC controllers and servo systems, industrial microscopes and vision, motorcycles and e-bikes, and special projects such as counter-drone systems.

The vision side of the business is older than TROY. It began with a Shenzhen imaging manufacturer founded in 2009 in Nanshan, which built the Linux-based SMARTGO inspection camera on FPGA + ARM hardware with its own C++ software and close to a hundred detection, measurement and recognition algorithms. That inheritance still shapes how we sell: measure, record, prove — do not describe.

Delivery is two countries by design. Engineering, integration, calibration and acceptance testing happen in Shenzhen; assembly, spare parts and field service for Southeast Asia run from Hanoi through TROY Vietnam. TROY CAS, the group’s consulting arm, handles the unglamorous half of market entry — company registration, recruitment, legal and tax work — for manufacturers setting up in Vietnam.

2009 Imaging roots A Shenzhen microscope and machine-vision manufacturer is founded in Nanshan — the origin of today’s microscope and vision line.
2017 TROY founded The group starts in Bao’an as the export and sourcing arm for Chinese robot and automation factories.
Today Specification to commissioning 551 published products across 14 lines, engineered and acceptance-tested in Shenzhen and serviced from Hanoi.
One inbox, no switchboard. Sales, engineering and after-sales answer from the same mailbox and the same WhatsApp line — [email protected] · +84 96 212 37 55.
Legal nameShenZhen TROY Intelligent Robotics Co., Ltd.
Founded2017 · Bao’an, Shenzhen
GroupShenzhen HQ · TROY CAS (Shenzhen) · TROY Vietnam (Hanoi)
Product lines14 — robots, automation, vision, motion, special projects
Catalogue551 products · 5 turnkey solution routes
RangePayload 6–800 kg · cobots 3–30 kg · AMR fleets · vision systems
Compliance3 CE certificate families on file; cell-level CE file and EN ISO 12100 risk assessment with every integration
Service24-month warranty · spare parts held 7 years
LanguagesEnglish · Chinese · Vietnamese
Commercial termsPrice on request · quotation within 48 h · FOB Shenzhen
How a project runs

From a Part Drawing to Production.

Five steps, one accountable team. The engineer who quotes the cycle time is the engineer who signs the acceptance test.

Quality & compliance
01
Send the part, not a catalogue number Give us the part, the tolerance and the target rate. Payload, reach and cycle time are sized from those three numbers — and we say so when a robot is the wrong answer.
02
Cell concept and a firm quotation Layout, fixture scope, guarding, controls and a cycle estimate in one document. Price on request, a quotation within 48 hours, FOB Shenzhen, lead time stated.
03
Built by the engineers who quoted it Fixture, guarding, safety circuit, PLC and vision are built and wired in Bao’an by the team that sized the cell — not handed to a third party after the order.
04
FAT with your part The cell runs your part at rate in Shenzhen. Cycle time and quality are recorded, the run is filmed, and you sign it off before the machine ships.
05
Commission, train, support Installation on your floor and operator training, then spare parts held for 7 years and remote diagnostics when something drifts.
Cell build and acceptance-test bay in Bao’an, Shenzhen

Cell build and acceptance-test bay · Bao’an, Shenzhen

What usually goes wrong: a machine is bought from a catalogue page and nobody owns the fixture, the safety circuit or the cycle time. Our answer is to put all three under one signature.
Why buyers work with us

Five Reasons, None of Them “Leading Supplier”.

The part a sales deck usually buries: who still answers after the machine lands.

01

Direct from the Manufacturer

We work inside the OEM relationship rather than through a layer of traders: ROKAE, Yaskawa, JAKA, AUBO, ADTECH and Inovance supply the platforms we integrate. When a specification changes, we hear it from the factory.

02

The Engineers Who Size It, Prove It

The team that calculates payload and cycle time is the team that runs the acceptance test. There is no sales desk that hands your file to someone else after the order.

03

On Site, Not on a Video Call

Commissioning, operator training and service visits on your floor. A call is support; it is not installation.

04

Turnkey Cells, Not Boxes

Fixture, guarding, safety circuit, PLC, vision and conveyor under one contract and one acceptance test — not five suppliers pointing at each other.

05

Documented, Not Promised

CE declaration, EN ISO 12100 risk assessment, electrical drawings, PLC backups, FAT report and spare-parts list travel with the machine.

Group structure

Three Companies, One Chain of Responsibility.

An export order, a Vietnam base and a consulting arm that files the paperwork. One group answers for all three.

Locations & visits
01 · Headquarters

ShenZhen TROY Intelligent Robotics Co., Ltd.

Building E, Haoyi Commercial and Residential Building, Gangtou Industrial Zone, No. 27, Dapu 2nd Road, Bao'an District, Shenzhen, China.

Robot cells, cobots, AMRs, automation lines and special projects: specification, integration, calibration and acceptance testing.

troysupply.com
02 · Consulting arm

TROY CAS Consultant Service (ShenZhen) Co., Ltd.

Room 411, Building E, Haoyi Commercial and Residential Building, Gangtou Industrial Zone, No. 27, Dapu 2nd Road, Bao’an District, Shenzhen, China.

The China–Vietnam bridge: company registration, recruitment and HR, local legal counsel, finance and tax, accounting, and management of local sales and marketing teams.

troycas.cn
03 · TROY Vietnam

TROY Vietnam Consultant & Network Tech Co., Ltd.

DV12-LK430 Yen Lo service land, Yen Nghia ward, Ha Dong district, Hanoi, Vietnam.

Assembly, spare-parts stock and field service for Southeast Asian projects, staffed by Vietnamese and English speaking engineers.

troysupply.vn

Where the Machines Are Built

Integration, fixture build and acceptance testing happen in Bao’an. The platforms themselves come from partner factories — the names on the certificate, not a trading layer.

Related: CE certificates on file · manuals and catalogues · the full catalogue

ROKAE (Beijing) Robotics Co., Ltd.Industrial and collaborative arms
Shandong plant — 888 Huarun Rd, Central Mechanical & Electrical Industrial Park, Zhongxindian, Zoucheng, Jining, Shandong, China.
PMTT Group, HanoiCooperation manufacturer — assembly
Office / factory: Lot CN2, Phu Nghia Industrial Park, Chuong My, Hanoi. Factory: Lot 185/1-2, Nai Bai, An Thuong, Hoai Duc, Hanoi.
Integration platformsPartner OEMs
Yaskawa · JAKA · AUBO · ADTECH · Inovance
Vision
“To win the future world with our customers.”

TROY vision, written at founding in 2017 — and still the shortest description of the business model.

What we hold to
Engineering accountability The engineer who specifies the cell signs its acceptance test. Responsibility does not move to a help desk at the dock.
Documented delivery If it is not in the folder — CE file, risk assessment, drawings, FAT report — it did not happen.
Local presence, international standard Chinese and Vietnamese teams, one specification, one acceptance record — so a machine installed in Hanoi is documented the same way as one tested in Shenzhen.
Next step

Send the Part Drawing. We’ll Send the Cell Concept.

A sales engineer replies within 48 hours with a robot shortlist, a cycle estimate and a quotation — with the compliance file attached where it applies.

Request a quote
TROY AssistantSales engineer · replies in seconds
Hi — I’m TROY’s sales engineer bot.
Tell me what you need to automate: part weight, reach or cycle time is enough. I answer in your language and can put you in front of a human engineer in 48 h.
No prices published — quotation per configuration within 48 h · quote form