ข้ามไปที่เนื้อหา
วิศวกรฝ่ายขายออนไลน์ · 09:00–21:00 CST เป่าอัน, เซินเจิ้น, จีน
+86 400 098 8557 พูดคุยกับวิศวกร
บ้าน/สินค้า/หุ่นยนต์เคลื่อนที่และ AMR/TRLU-S4-100K
TRLU-S4-100K 4WD 4WS โครงหุ่นยนต์เคลื่อนที่ออฟโรด TRLU-S4-100K
เอกสาร CE ตามคำขอ
หุ่นยนต์เคลื่อนที่และ AMR · TRLU-S4-100K

โครงหุ่นยนต์เคลื่อนที่ออฟโรด 4WD 4WS TRLU-S4-100K

TRLU-S4-100K · ระยะเวลาดำเนินการ 15-30 วัน

TRLU-S4-100K เป็นหุ่นยนต์เคลื่อนที่สำหรับการขนส่งภายใน/คลังสินค้า ข้อมูลจำเพาะที่สำคัญ: น้ำหนักบรรทุก 100 กก.; ขนาด 718 x 560 x 340 มม. น้ำหนักรถ 50 กก. เวลานำคือ 15-30 วัน; ราคาจะถูกเสนอตามการกำหนดค่า การรับรอง: เอกสาร CE ตามคำขอ

แบบอย่าง
TRLU-S4-100K
เพย์โหลด
100 kg
ขนาด
718 x 560 x 340 mm
น้ำหนักรถ
50 kg
ขับ
4 ไดรฟ์ + 4 พวงมาลัยเซอร์โวมอเตอร์ (8 แกน)
หกโหมดการเคลื่อนไหว
4W4S, Ackermann, ปู, แนวทแยง, หมุน, ที่จอดรถ
ราคาตามคำขอราคาต่อการกำหนดค่า · ใบเสนอราคาภายใน 48 ชั่วโมง · FOB เซินเจิ้น · ขั้นต่ำ 1 หน่วย
รวมไฟล์ CEไขมันก่อนจัดส่งอะไหล่ 7 ปีตัวเลือกการรับประกัน 3 ปี
การตรวจสอบวิศวกร:ส่งแบบร่างชิ้นส่วนและอัตราเป้าหมาย — เราจะส่งคืนค่าประมาณรอบและแนวคิดฟิกซ์เจอร์พร้อมใบเสนอราคา

แพลตฟอร์มนี้มีไว้เพื่ออะไร

TRLU-S4-100K เป็นโครงหุ่นยนต์ขับเคลื่อน 4WD 4WS ขับเคลื่อนด้วยสายน้ำหนักบรรทุก 100 กก. พร้อมด้วยเซอร์โวมอเตอร์อิสระ 8 ตัว โหมดการเคลื่อนที่ 6 โหมด รัศมีวงเลี้ยว 0 มม. ความสามารถในการขึ้นเกรด 30 องศา และการป้องกัน IP55 CAN บัสและการควบคุม RC พร้อมสำหรับการพัฒนา LiDAR, RTK และ SLAM

โลจิสติกส์ภายในการขนส่งคลังสินค้าการให้อาหารแบบเส้นโลจิสติกส์กลางแจ้ง

เงื่อนไขทางการค้า

ใบเสนอราคาราคาต่อการกำหนดค่า — ตอบกลับภายใน 48 ชั่วโมง
เวลานำ15-30 days
ขั้นต่ำ1 ยูนิต
ต้นทางจีน
พอร์ตของการโหลดเซินเจิ้นประเทศจีน
IncotermFOB เซินเจิ้น / CIF ตามคำขอ
การชำระเงินเงินมัดจำ 30%, 70% ก่อนจัดส่ง
การรับประกันมาตรฐาน 24 เดือน สามารถเลือกได้ 36 เดือน
หุ่นยนต์เคลื่อนที่และ AMR · TRLU-S4-100K

รายละเอียดสินค้า

บันทึกการใช้งาน แบบก่อสร้าง และวิดีโอจากไฟล์ทางวิศวกรรม TROY — เอกสารชุดเดียวกันกับใบเสนอราคา

Compact 4WD 4WS Drive-by-Wire Chassis for Off-Road AMR Development

The TRLU-S4-100K is a compact four-wheel-drive, four-wheel-steering mobile robot chassis built for developers who need a reliable moving platform. Each of its four wheels carries its own drive motor and steering motor, giving eight independent servo axes: the chassis can travel forward, sideways and diagonally, and rotate on the spot around its own centre. With a 100 kg payload, a 718 x 560 x 340 mm footprint and 58.5 mm of suspension clearance, it works as comfortably in narrow corridors and pipe racks as it does on uneven outdoor ground.

Mount a LiDAR, depth camera, RTK module, IMU or industrial PC on the two pre-installed 40-series European aluminium profiles and the TRLU-S4-100K becomes an unmanned inspection robot, a research and teaching platform, or an outdoor logistics carrier. Control it with the supplied FlySky remote controller, or drive it from your own host computer through the Type-C CAN bus and the documented little-endian protocol.

off road robot chassis

Key Features

  • 8-motor 4WD 4WS layout: 4 drive motors + 4 steering servo motors, independently controlled per wheel
  • Six motion modes: 4W4S, front/rear Ackermann, crabbing (lateral), diagonal, spin and parking
  • รัศมีวงเลี้ยวต่ำสุด 0 มม. และรัศมีการหมุน 420 มม. - เลี้ยวภายในฐานของตัวเอง
  • น้ำหนักบรรทุก 100 กก. น้ำหนักตัวรถ 50 กก. และรางที่กว้างขึ้น 421 มม
  • Parallel independent suspension on all four wheels; 30 degrees gradeability without load, 20 degrees fully loaded
  • การป้องกัน IP55 และช่วงการทำงาน -10 C ถึง 55 C สำหรับไซต์ที่มีฝุ่น ชื้น และมีฝนตกเล็กน้อย
  • 2.0 m/s maximum speed (no load), 4 h battery life, 4 h charging
  • CAN บัสแบบขับเคลื่อนด้วยสายพร้อมรีโมทคอนโทรล FlySky RC; อินเทอร์เฟซการสื่อสาร Type-C
  • เอาต์พุตกำลังภายนอก 1 x 48 V 10 A (480 W) และ 1 x 24 V 10 A (240 W) สำหรับเซ็นเซอร์และเพย์โหลด
  • 40-series aluminium profiles, emergency stop, battery level indicator and automatic charging electrodes

Six Motion Modes - One Chassis

ModeHow the chassis movesTypical use
4W4S (default)ล้อทั้งสี่ขับเคลื่อนและบังคับทิศทางอย่างอิสระ แชสซีแปลไปในทิศทางใดก็ได้โดยไม่ต้องเปลี่ยนทิศทางPrecise docking, narrow working areas
Ackermannล้อหน้าและหลังบังคับเลี้ยวในรูปแบบคล้ายรถFast straight-line travel in long corridors
Crabbingล้อหมุนได้ 90 องศา และแชสซีจะเคลื่อนไปด้านข้างSliding into racks or pallets without turning
Diagonalล้อตั้งไว้ที่ 45 องศา เคลื่อนที่ไปตามเวกเตอร์แนวทแยงQuick repositioning and aisle entry
SpinWheels rotate around the chassis centreTurning in place, 0 mm turning radius
Parkingล้อล็อคอยู่ในท่าเบรกStable standing on slopes, safe load transfer

โหมดการเคลื่อนไหวถูกเลือกผ่าน CAN (คำสั่ง 0x110) หรือจากรีโมทคอนโทรล และแชสซีจะรายงานโหมดแอคทีฟกลับไปที่ 0x220 ดังนั้นคอมพิวเตอร์โฮสต์จึงรู้เสมอว่าโมเดลคิเนเมติกส์ใดกำลังทำงานอยู่

Independent Parallel Suspension and 30 Degree Gradeability

An all-metal parallel wishbone layout with industrial shock absorbers keeps all four wheels in contact with the ground. On uneven terrain or on a slope, the suspension absorbs height differences so that each wheel keeps maximum traction, while the low centre of gravity and the 421 mm track keep the platform stable under the full 100 kg payload. The TRLU-S4-100K climbs 30 degrees without load and 20 degrees fully loaded, with a 118 mm chassis clearance for obstacles and rough ground.

off road robot chassis

Technical Specifications

External dimensions (L x W x H)718 x 560 x 340 mm
Track width421 mm
Wheelbase470 mm
Maximum payload100 kg
น้ำหนักรถ50 kg
Drive type4-wheel drive, 4-wheel steering (4W4S)
Motors4 ไดรฟ์ + 4 พวงมาลัยเซอร์โวมอเตอร์ (8 แกน)
ระบบกันสะเทือนParallel suspension, 4-wheel independent
Maximum speed (no load)2.0 m/s
Minimum turning radius0 mm
Rotation radius420 mm
Ground clearanceSuspension 58.5 mm / chassis 118 mm
Maximum gradeability30 องศา (ไม่โหลด) / 20 องศา (โหลดเต็ม)
อายุการใช้งานแบตเตอรี่4 h
เวลาในการชาร์จ4 h (5 A charger)
Protection ratingIP55
อุณหภูมิในการทำงาน-10 C to 55 C
Control modeรีโมท FlySky RC / CAN บัสแบบขับเคลื่อนด้วยสาย
CommunicationCAN bus (Little-Endian) via Type-C port
External power output1 x 48 โวลต์ 10 แอมป์ (480 วัตต์), 1 x 24 โวลต์ 10 แอมป์ (240 วัตต์)
กำลังชาร์จManual charger AC 220 V / automatic charging station (optional)
Motion modes4W4S, Ackermann, ปู, แนวทแยง, หมุน, ที่จอดรถ

Dimensions (unit: mm)

off road robot chassis

อินเทอร์เฟซและพลังงานออนบอร์ด

off road robot chassis

  • Emergency stop switch - cuts motor output, industrial-grade push button
  • Start switch - chassis main power
  • Battery level indicator - real-time state of charge
  • อิเล็กโทรดชาร์จอัตโนมัติ - ทำงานร่วมกับสถานีชาร์จเสริม
  • อินเทอร์เฟซ Type-C - การสื่อสาร CAN และการพัฒนารอง
  • กำลังขับภายนอก - 1 x 48 V 10 A (480 W), 1 x 24 V 10 A (240 W)
  • Manual charging port - AC 220 V dedicated lithium battery charger

CAN Bus Development

The firmware speaks a documented Little-Endian CAN protocol: motion control frame 0x100 at 20 ms (X/Y linear velocity, Z angular velocity, target steering angle), motion feedback 0x200, motion-mode switch 0x110 with feedback on 0x220, system status 0x204, BMS data on 0x206 and 0x207, drive-wheel feedback 0x251-0x258, steering servo feedback 0x271-0x278, IMU 0x300 and RC channels 0x301. A 500 ms receive timeout brings the chassis to a controlled stop, so a host controller only has to publish commands periodically.

What is in the Box

  • 1 x TRLU-S4-100K 4WD 4WS drive-by-wire chassis
  • 1 x manual battery charger (AC 220 V)
  • 1 x FlySky wireless remote controller
  • 1 x automatic charging station (optional)

Application Scenarios

Unmanned inspection in substations, pipe galleries and factory halls; research and teaching platforms for SLAM, navigation and multi-robot collaboration; outdoor material transfer and logistics in energy, construction, agriculture and industrial sites; mobile base for robotic arms and mobile manipulators. The chassis is delivered as a development platform: mounting holes, aluminium profiles, CAN protocol and power outputs are ready for your own sensors and payloads.

off road robot chassis

off road robot chassis

Full Specification Sheet

off road robot chassisoff road robot chassisoff road robot chassisoff road robot chassis

การรับประกัน: รับประกันในต่างประเทศ 12 เดือน (ไม่รวมวัสดุสิ้นเปลือง เช่น แบตเตอรี่และยาง)

ข้อมูลจำเพาะ

ข้อมูลทางเทคนิคเต็มรูปแบบ

แบบอย่างTRLU-S4-100K
เพย์โหลด100 kg
ขนาด718 x 560 x 340 mm
น้ำหนักรถ50 kg
ขับ4 ไดรฟ์ + 4 พวงมาลัยเซอร์โวมอเตอร์ (8 แกน)
หกโหมดการเคลื่อนไหว4W4S, Ackermann, ปู, แนวทแยง, หมุน, ที่จอดรถ
สูงสุด ความเร็ว2.0 m/s
รัศมีวงเลี้ยว0 mm
ความสามารถในการให้คะแนน30 องศา (ไม่โหลด) / 20 องศา (โหลดเต็ม)
การป้องกันIP55
หมวดหมู่หุ่นยนต์เคลื่อนที่และ AMR
เวลานำ15-30 days

ค่าเป็นค่าเล็กน้อยที่ 20 °C ดาวน์โหลดเอกสารข้อมูลสำหรับโมเดล CAD กราฟแรงบิด และแมป I/O ของตัวควบคุม

การใช้งาน

มันวิ่งไปไหน.

โลจิสติกส์ภายใน

กำหนดขนาดและควบคุมการใช้งานโดยวิศวกร TROY

การขนส่งคลังสินค้า

กำหนดขนาดและควบคุมการใช้งานโดยวิศวกร TROY

การให้อาหารแบบเส้น

กำหนดขนาดและควบคุมการใช้งานโดยวิศวกร TROY

โลจิสติกส์กลางแจ้ง

กำหนดขนาดและควบคุมการใช้งานโดยวิศวกร TROY

คำถามที่พบบ่อย

คำถามของผู้ซื้อ

ข้อกำหนดที่สำคัญคืออะไร?

รุ่น: TRLU-S4-100K น้ำหนักบรรทุก: 100 กก. ขนาด: 718 x 560 x 340 มม.

ระยะเวลารอคอยคืออะไร?

15-30 วันสำหรับการกำหนดค่ามาตรฐาน ยืนยันตามใบเสนอราคา

สามารถปรับแต่งได้หรือไม่?

ใช่ — สามารถปรับตัวเลือก OEM/ODM แรงดันไฟฟ้า เครื่องมือ และการสร้างแบรนด์ได้ ส่งใบสมัครและผลลัพธ์เป้าหมายสำหรับข้อเสนอ

อ้าง

รับข้อเสนอราคาสำหรับ TRLU-S4-100K

รวมส่วนอัตราเป้าหมายและพอร์ตปลายทาง วิศวกร ไม่ใช่แชทบอท ตอบกลับภายใน 48 ชั่วโมง

NDA ตามคำขอภาพวาดเก็บไว้ 24 เดือนไม่มีการเรียกตัวแทนจำหน่าย

เราตอบกลับภายใน 48 ชั่วโมง ไม่มีจดหมายข่าว ไม่มีรายชื่อตัวแทนจำหน่าย

ที่เกี่ยวข้อง

หมวดเดียวกัน

รีวิวโดย TROY วิศวกรรม ·. ข้อมูลจำเพาะจะได้รับการตรวจสอบอีกครั้งกับเอกสารข้อมูลของซัพพลายเออร์ในทุกใบเสนอราคา

TROY ผู้ช่วยวิศวกรฝ่ายขาย · ตอบกลับภายในไม่กี่วินาที
สวัสดี ฉันคือบอทวิศวกรฝ่ายขายของ TROY
บอกฉันถึงสิ่งที่คุณต้องการเพื่อทำให้เป็นอัตโนมัติ: น้ำหนักชิ้นส่วน ระยะที่เข้าถึงได้ หรือรอบเวลาก็เพียงพอแล้ว ฉันตอบเป็นภาษาของคุณและสามารถนำคุณไปพบวิศวกรที่เป็นมนุษย์ได้ภายใน 48 ชั่วโมง
ไม่มีการเผยแพร่ราคา — ใบเสนอราคาต่อการกำหนดค่าภายใน 48 ชั่วโมง ·แบบฟอร์มใบเสนอราคา