Skip to content
Sales engineers online · 09:00–21:00 CST Bao'an, Shenzhen, China
Home/Knowledge base/Cobots
Cobots · updated 2026-11-16

Cobot or Industrial Robot: The Weight Is the Deciding Line

Below roughly 20 kg and slow speeds a cobot removes the fence and the integrator. Above it, an industrial arm is cheaper per kilo and faster per cycle.

Where Cobots Win

A cobot earns its price when the cell has no room for a fence, when parts are loaded by hand next to the robot, or when the same arm has to be wheeled between two stations. Our cobot range runs from 1.5 kg to 45 kg — the ROKAE SR series at the light end, CR series up to 20 kg, and the CR35-45C at 45 kg. Below about 12 kg, a cobot usually beats an industrial arm on total installed cost because the safety enclosure disappears.

Where Industrial Arms Win

Speed and reach per yuan. A 12 kg industrial arm reaches 2,258 mm at full speed behind a fence and costs less than a 12 kg cobot of the same reach. If the cell is already fenced — welding, press tending, palletizing — the cobot's safety advantage buys nothing, and the industrial arm wins on cycle time.

The 20 kg Crossover

Cobots get expensive fast above 20 kg: joints, brakes and the safety-rated encoders scale with load. Our CR35-45C exists for 35–45 kg work, but at that weight most buyers are better served by a 50 kg industrial arm plus a fence. Ask what the cycle time is at the payload you actually need, not at the rated maximum — cobot speed falls off with load much more steeply.

Lead Times

Collaborative arms are stocked builds: 15–30 days for ROKAE CR/SR, 7–10 days for the CS series and the TR-R/TR10/TR20 range. Industrial arms in the 6–20 kg class are typically 15–20 days. If a project hinges on a date, the stock builds are the ones to design around.

Questions We Get Asked

Is a cobot safe without any enclosure?

Only after a risk assessment of the actual tool and workpiece. A cobot with a sharp gripper or a heavy part is not automatically safe; the arm's force limits help, the tool decides.

Can a cobot run 24/7?

Yes, but check duty cycle and brake rating for the payload. Continuous high-speed work is where the industrial arm's heavier gearbox pays off.

Which is easier to program?

Cobots ship with hand-guided teaching and a graphical interface. Industrial arms now offer the same, but assume a integrator for anything beyond a simple pick-and-place.

Machines This Applies To

Ask an engineer about your case

Keep Reading

TROY AssistantSales engineer · replies in seconds
Hi — I’m TROY’s sales engineer bot.
Tell me what you need to automate: part weight, reach or cycle time is enough. I answer in your language and can put you in front of a human engineer in 48 h.
No prices published — quotation per configuration within 48 h · quote form