コボットか産業用ロボット: 重量が決め手
約 20 kg 未満で速度が遅い場合は、協働ロボットがフェンスとインテグレーターを取り外します。それを超えると、産業用アームの方がキロ当たりのコストが安くなり、サイクル当たりの速度が速くなります。
Where cobots win
A cobot earns its price when the cell has no room for a fence, when parts are loaded by hand next to the robot, or when the same arm has to be wheeled between two stations. Our cobot range runs from 1.5 kg to 45 kg — the ROKAE SR series at the light end, CR series up to 20 kg, and the CR35-45C at 45 kg. Below about 12 kg, a cobot usually beats an industrial arm on total installed cost because the safety enclosure disappears.
Where industrial arms win
Speed and reach per yuan. A 12 kg industrial arm reaches 2,258 mm at full speed behind a fence and costs less than a 12 kg cobot of the same reach. If the cell is already fenced — welding, press tending, palletizing — the cobot's safety advantage buys nothing, and the industrial arm wins on cycle time.
The 20 kg crossover
Cobots get expensive fast above 20 kg: joints, brakes and the safety-rated encoders scale with load. Our CR35-45C exists for 35–45 kg work, but at that weight most buyers are better served by a 50 kg industrial arm plus a fence. Ask what the cycle time is at the payload you actually need, not at the rated maximum — cobot speed falls off with load much more steeply.
Lead times
コラボレーティブアームにはビルドがストックされています。ROKAE CR/SR の場合は 15 ~ 30 日、CS シリーズおよび TR-R/TR10/TR20 シリーズの場合は 7 ~ 10 日です。 6 ~ 20 kg クラスの工業用武器の場合、通常 15 ~ 20 日かかります。プロジェクトが日付に左右される場合は、ストック ビルドを中心に設計します。
Questions we get asked
協働ロボットは囲いがなくても安全ですか?
実際の工具とワークのリスク評価を行った後でのみ。鋭利なグリッパーや重い部品を備えた協働ロボットは、自動的に安全になるわけではありません。腕の力の制限が役立ち、ツールが決定します。
協働ロボットは 24 時間年中無休で稼働できますか?
はい、ただしペイロードのデューティサイクルとブレーキ定格を確認してください。産業用アームのより重いギアボックスが効果を発揮するのは、継続的な高速作業です。
どちらがプログラムしやすいでしょうか?
コボットには、手動による指導とグラフィカル インターフェイスが付属しています。現在、産業用兵器も同じものを提供していますが、単純なピックアンドプレイス以上のあらゆるものをインテグレーターが行うことを前提としています。
Machines this applies to
- ROKAE CR12 協働ロボット - 重作業用 12kg 6 軸協働ロボットCR12 · 15–30 日
- CS シリーズ 12 kg 協働ロボット (力制御機能付き)CS612 · 7日間
- ROKAE NB25H シリーズ 6 軸産業用ロボット - 可搬質量 12kg、リーチ 2258mmNB25H · 30日
Keep reading
- 機械に同梱される書類 (および署名する前に何を要求するか)マニュアル、図面、I/Oリスト、スペアパーツリスト、FATレポート、パッキングリスト。これらのいずれかが欠けていると、コミッショニングに 1 か月のメールが必要になります。
- ガラスファサード清掃ロボット: 建物が実際に提供するものロボットは意思決定の一部にすぎません。アンカー、水、屋根へのアクセス、風の制限、および清掃員との契約によって、実際に使用されるかどうかが決まります。
- 外骨格の選択: パッシブかパワードか、実際に痛む体の部位受動的ユニットは姿勢からエネルギーを借ります。動力ユニットはトルクを追加します。正しい選択は、作業時間、負荷、作業者が歩くか立っているかによって異なります。