
Cast AlNiCo Cylinder Magnet
The TR-ANC-CY is a magnet for industrial processing / custom machinery. Lead time is 15-25 days; pricing is quoted per configuration. Certifications: CE documentation on request.
- Model
- TR-ANC-CY
- Lead time
- 15-25 days
- Category
- Other Machinery
What This Platform Is For
Cast AlNiCo cylinder magnets with threaded mounting holes, Br up to 12.8 kGs and working temperature to 550°C. Stable, long-life magnets for sensors, instruments and guitar pickups.
Commercial Terms
| Quotation | Priced per configuration — reply within 48 hours |
|---|---|
| Lead time | 15-25 days |
| MOQ | 100 units |
| Origin | China |
| Port of loading | Shenzhen, China |
| Incoterm | FOB Shenzhen / CIF on request |
| Payment | 30% deposit, 70% before shipment |
| Warranty | 24 months standard, 36 months optional |
Product Details
Application notes, construction drawings and video from the TROY engineering file — the same documentation shipped with the quotation.
AlNiCo (aluminium-nickel-cobalt) magnets were the first permanent magnets and remain unrivalled for temperature stability - usable from -250°C to +550°C with almost no loss of flux. Cast AlNiCo cylinders with threaded or plain holes are widely used in sensors, instruments, holding devices and guitar pickups.
Cast AlNiCo delivers the highest Br of the AlNiCo family (up to 12.8 kGs). Its low coercivity must be respected in the magnetic circuit design - our engineers can advise on suitable keepers and pole pieces.

Key features
1. Extreme temperature range - Stable from -250°C to +550°C - no other permanent magnet family comes close.
2. High remanence - Br up to 12.8 kGs for maximum flux in instrument and sensor designs.
3. Excellent ageing behaviour - Magnetic output essentially unchanged after decades of service.
4. Machined features - Threaded hole, plain hole, slot or stepped cylinder produced to drawing.
5. Surface finish - Supplied bare, red/blue painted or epoxy coated for identification and protection.
6. Guitar & sensor grade - Consistent, vintage-accurate grades for pickups and instruments.

Applications
Guitar pickups and instruments • Hall sensors and magnetometers • High-temperature sensors • Holding and retaining devices • Educational equipment

Technical specifications
| Material | Cast AlNiCo (Al-Ni-Co-Fe alloy) |
| Grades | AlNiCo 2 / 3 / 5 / 6 / 8 |
| Remanence Br | 7.0 - 12.8 kGs |
| Coercivity Hcb | 0.5 - 1.9 kOe |
| Energy product (BH)max | 1.5 - 7.5 MGOe |
| Max. working temperature | 550°C |
| Density | 7.3 g/cm³ |
| Shapes | Cylinder with threaded / plain hole, bar, horseshoe, ring |
| Finish | Bare / painted / epoxy coated |
| Tolerance | ±0.05 mm (machined) |
AlNiCo cylinders can be supplied with threaded holes, pole pieces and keeper assemblies. Send your drawing for a quotation.
Full Technical Data
| Model | TR-ANC-CY |
|---|---|
| Lead time | 15-25 days |
| Category | Other Machinery |
Values are nominal at 20 °C. Download the datasheet for cad models, torque curves and controller I/O maps.
Where It Runs
Sized and commissioned by TROY engineers.
Sized and commissioned by TROY engineers.
Sized and commissioned by TROY engineers.
Sized and commissioned by TROY engineers.
Buyer Questions
What are the key specifications of the TR-ANC-CY?
Model TR-ANC-CY. A full datasheet is available on request.
What is the lead time and MOQ for the TR-ANC-CY?
Lead time is 15-25 days; MOQ is 100 units.
How is the TR-ANC-CY priced?
Pricing is quoted per configuration, including tooling and freight where applicable.
Get a Priced Proposal for TR-ANC-CY
Include the part, target rate and destination port. An engineer — not a chatbot — replies within 48 hours.
Same Category
Custom Shaped NdFeB Magnet
Custom Magnetic Rotor Assembly
Sintered Ferrite Ring Magnet Y30
Reviewed by TROY Engineering · . Specifications are re-checked against the supplier datasheet at every quotation.