
CNC 4-rollen plaatwalsmachine
De 16-2500 is een CNC-machine voor CNC-bewerkingen/motion control. Doorlooptijd bedraagt 45 dagen; prijzen worden per configuratie vermeld. Certificaten: CE-documentatie op aanvraag.
- Model
- 16-2500
- Doorlooptijd
- 45 dagen
- Categorie
- CNC en bewegingsbesturing
Waar dit platform voor is
CNC 4 Roll Plate Rolling Machine applications: This machine is suitable for the bending and forming of metal plates. It can roll round, arc and conical workpieces within a certain range. It has the function of pre-bending the end of the plate, the remaining straight edge is small, and the work efficiency is high.
Commerciële voorwaarden
| Offerte | Geprijsd per configuratie - antwoord binnen 48 uur |
|---|---|
| Doorlooptijd | 45 dagen |
| MOQ | 1 eenheid |
| Oorsprong | China |
| Haven van laden | Shanghai, China |
| Incoterm | FOB Shanghai / CIF on request |
| Betaling | 30% aanbetaling, 70% vóór verzending |
| Garantie | 24 maanden standaard, 36 maanden optioneel |
Productdetails
Applicatienota's, constructietekeningen en video uit het TROY-engineeringbestand: dezelfde documentatie die bij de offerte wordt geleverd.

CNC 4 Roll Plate Rolling Machine Functies:
CNC four-roller plate rolling machine can complete the pre-bending and rolling of the end of the sheet metal without turning around the metal sheet at one time. And the remaining straight edge is the smallest among all kinds of plate rolling machines. In this series of plate rolling machines, the upper roll and the upper roll are both driving rolls, driven by hydraulic motors, and the side rolls are driven rolls, which are driven by the friction between the steel plate and each roll to rotate. The position of the upper roller is fixed, and the lower roller and the side roller move up and down under the drive of parallel oil cylinders at both ends. The overturning and reset of the upper roller unloading tipping body is driven by the oil cylinder. In order to improve the rigidity of the lower roller, a support roller is installed in the center of the lower roller, and its lifting is driven by the oil cylinder.
Deze serie plaatwalsmachines heeft de volgende opvallende kenmerken:
The working roll bearing adopts the self-aligning roller bearing for rolling mill, which has small frictional resistance, less power loss, long service life and low energy consumption.
The synchronous lifting of both ends of the lower roller and the side roller, the control and leveling of the inclination of the winding cone are automatically controlled by the numerical control system, and the control accuracy is high.
The numerical control system is leading in China. It has the functions of screen display, rolling calculation, program control, process parameter storage, software protection and fault alarm.

CNC Plate Rolling Machine description:
The four-roller arc downward adjustment plate rolling machine is independently developed, designed and produced by our company introducing advanced technology from home and abroad. Equipment electrical, hydraulic and other configurations are selected brand. Full hydraulic dual drive, digital program control. The whole machine has advanced structure, superior performance and high efficiency, and it is in the leading position in the same industry at home and abroad.
CNC Plate Rolling Machine structure overview:
De machine bestaat hoofdzakelijk uit een framedeel, een bovenste roldeel, een onderste roldeel, een zijroldeel, een draaiend lagerlichaamsdeel, een hoofdtransmissiedeel, een hydraulisch deel, een elektrisch deel, een smeerdeel, een basisdeel enzovoort.
De linker- en rechterrekken van de machine zijn geïnstalleerd op een integrale basis, die het hoofdgedeelte van de machine vormt. Het linkereindlagerlichaam van de bovenste rol is in het draaiende lagerlichaam gepakt en het rechtereindlagerlichaam is in het rechterframe geïnstalleerd.
The upper roll of the machine is the main drive roll, and the hydraulic motor is directly connected to the drive roll through the planetary reducer. The hydraulic motor is equipped with a timely brake, so that the machine can stop in time to achieve the smaller straight edge of the plate. Among them, the position of the upper roller is fixed, and it performs rotating movement; the lower roller and side rollers perform both rotating movement and lifting movement.
De oliecilinder van de onderste rol van de machine wordt geïnstalleerd in de geleidingsgroeven van het linker- en rechterframe, de heen en weer gaande beweging van de oliecilinder en de boogbeweging van de zijrollen.
There is an overturning bearing body on the left frame, which can be driven by the overturning oil cylinder to realize opening and closing with the head of the upper roller; there is a balance device at the tail of the upper roller, which can realize the balance of the upper roller when the upper roller and the inverted head frame are opened and cocked. The movement of the working rolls is guided by high-quality linear slides or arcs.

Model | MAX Thickness (mm) | MAX Width (mm) | Snelheid (m/min) | Pre-bending plate Thickness (mm) | Laden MIN Diameter (mm) | Top Roller Diameter (mm) | Bottom Roller Diameter (mm) | Side Roller diameter (mm) | Main Motor Stroom (KW) | N.W. (T) | Dimension (mm) |
8×2000 | 8 | 2000 | 6.1 | 6 | 450 | 280 | 260 | 180 | 11 | 8.6 | 5300×1400×1760 |
8×2500 | 8 | 2500 | 6.1 | 6 | 500 | 300 | 280 | 230 | 15 | 8.4 | 6100×2000×2070 |
12×2000 | 12 | 2000 | 5.45 | 10 | 550 | 300 | 280 | 230 | 15 | 15.5 | 5600×2000×2070 |
12×2500 | 12 | 2500 | 5.5 | 10 | 600 | 340 | 300 | 260 | 22 | 16 | 6300×2000×1800 |
16×2000 | 16 | 2000 | 5.5 | 12 | 600 | 340 | 300 | 260 | 22 | 17.5 | 5800×2000×1800 |
12×4000 | 12 | 4000 | 4 | 10 | 800 | 380 | 340 | 280 | 30 | 28.5 | 7600×2000×2150 |
16×2500 | 16 | 2500 | 6.5 | 12 | 600 | 350 | 320 | 280 | 30 | 16 | 6810×2000×1870 |
20×2000 | 20 | 2000 | 6.5 | 12 | 600 | 350 | 320 | 280 | 30 | 24.5 | 6000×2000×1850 |
20×2500 | 20 | 2500 | 6.5 | 16 | 900 | 400 | 380 | 320 | 37 | 32 | 6850×2000×2070 |
20×3000 | 20 | 3000 | 4.5 | 16 | 900 | 450 | 420 | 350 | 45 | 41 | 7310×2100×2200 |
25×2000 | 25 | 2000 | 6.5 | 22 | 800 | 400 | 380 | 320 | 37 | 35 | 6300×2300×2070 |
25×2500 | 25 | 2500 | 5 | 22 | 800 | 450 | 420 | 350 | 45 | 45 | 8000×2600×2100 |
25×3000 | 25 | 3000 | 5 | 22 | 1000 | 480 | 460 | 380 | 55 | 52 | 9000×3200×2500 |
25×4000 | 25 | 4000 | 4 | 22 | 1200 | 540 | 500 | 450 | 63 | 62 | 10100×3500×2900 |
30×2000 | 30 | 2000 | 5 | 25 | 1000 | 450 | 420 | 350 | 45 | 40 | 7500×2600×2500 |
30×2500 | 30 | 2500 | 4.5 | 25 | 1000 | 480 | 460 | 380 | 55 | 50 | 8400×2590×2600 |
30×3000 | 30 | 3000 | 4 | 25 | 1200 | 560 | 520 | 420 | 60 | 61 | 9200×3500×2900 |
30×4000 | 30 | 4000 | 4 | 25 | 1400 | 650 | 600 | 480 | 60 | 75 | 10200×3500×2900 |
40×2000 | 40 | 2000 | 4.5 | 36 | 1000 | 520 | 500 | 400 | 45 | 60 | 8200×3000×2500 |
40×2500 | 40 | 2500 | 4 | 36 | 1200 | 560 | 520 | 420 | 60 | 65 | 8700×3500×2900 |
40×3000 | 40 | 3000 | 4 | 36 | 1500 | 650 | 580 | 480 | 75 | 95 | 9200×3600×3000 |
40×4000 | 40 | 4000 | 3.5 | 36 | 1800 | 710 | 650 | 500 | 86 | 120 | 12500×4000×3500 |
50×2000 | 50 | 2000 | 4 | 45 | 1200 | 650 | 580 | 480 | 60 | 86 | 8500×3500×3000 |
50×2500 | 50 | 2500 | 4.5 | 45 | 1300 | 680 | 620 | 500 | 75 | 96 | 9000×4000×3300 |
50×3200 | 50 | 3200 | 4 | 45 | 1800 | 720 | 650 | 520 | 90 | 110 | 9800×4300×3500 |
65×2500 | 65 | 2500 | 4 | 50 | 1800 | 700 | 650 | 500 | 90 | 108 | 9500×4500×3700 |
60×3000 | 60 | 3000 | 4.5 | 50 | 2000 | 750 | 710 | 560 | 121 | 135 | 10000×4500×3800 |



Volledige technische gegevens
| Model | 16-2500 |
|---|---|
| Doorlooptijd | 45 dagen |
| Categorie | CNC en bewegingsbesturing |
Waarden zijn nominaal bij 20 °C. Download de datasheet voor CAD-modellen, koppelcurven en I/O-kaarten van de controller.
Waar het draait
Op maat gemaakt en in opdracht gemaakt door TROY-ingenieurs.
Op maat gemaakt en in opdracht gemaakt door TROY-ingenieurs.
Op maat gemaakt en in opdracht gemaakt door TROY-ingenieurs.
Op maat gemaakt en in opdracht gemaakt door TROY-ingenieurs.
Vragen van kopers
Wat zijn de belangrijkste specificaties van de 16-2500?
Model 16-2500. Een volledige datasheet is op aanvraag verkrijgbaar.
Wat is de doorlooptijd en MOQ voor de 16-2500?
Doorlooptijd bedraagt 45 dagen; MOQ is 1 eenheid.
Hoe is de prijs van de 16-2500?
De prijzen worden vermeld per configuratie, inclusief gereedschap en vracht, indien van toepassing.
Ontvang een geprijsd voorstel voor 16-2500
Vermeld het onderdeel, het doeltarief en de bestemmingshaven. Een engineer – geen chatbot – antwoordt binnen 48 uur.
Zelfde categorie
Middelmatige snelheid van draadvonkmachine TR-RT80
RPNS-besturingssysteem
AMR-controller SRC-880
Beoordeeld door TROY Engineering ·. Bij iedere offerte worden de specificaties opnieuw getoetst aan de leveranciersdatasheet.