
CNC 4 rulo levha haddeleme makinesi
16-2500, CNC işleme / hareket kontrolüne yönelik bir CNC makinesidir. Teslim süresi 45 gündür; fiyatlandırma konfigürasyon başına fiyatlandırılır. Sertifikalar: Talep üzerine CE belgeleri.
- Modeli
- 16-2500
- Kurşun zamanı
- 45 gün
- Kategori
- CNC ve Hareket Kontrolü
Bu platformun amacı nedir?
CNC 4 Roll Plate Rolling Machine applications: This machine is suitable for the bending and forming of metal plates. It can roll round, arc and conical workpieces within a certain range. It has the function of pre-bending the end of the plate, the remaining straight edge is small, and the work efficiency is high.
Ticari şartlar
| Alıntı yapmak | Yapılandırmaya göre fiyatlandırılır — 48 saat içinde yanıt verin |
|---|---|
| Kurşun zamanı | 45 gün |
| Adedi | 1 adet |
| Menşei | Çin |
| Yükleme limanı | Shanghai, China |
| Incoterm | FOB Shanghai / CIF on request |
| Ödeme | %30 depozito, %70 sevkıyattan önce |
| Garanti | 24 ay standart, 36 ay opsiyonel |
Ürün detayları
TROY mühendislik dosyasındaki uygulama notları, inşaat çizimleri ve video — teklifle birlikte gönderilen belgelerin aynısı.

CNC 4 Roll Plate Rolling Machine Özellikler:
CNC four-roller plate rolling machine can complete the pre-bending and rolling of the end of the sheet metal without turning around the metal sheet at one time. And the remaining straight edge is the smallest among all kinds of plate rolling machines. In this series of plate rolling machines, the upper roll and the upper roll are both driving rolls, driven by hydraulic motors, and the side rolls are driven rolls, which are driven by the friction between the steel plate and each roll to rotate. The position of the upper roller is fixed, and the lower roller and the side roller move up and down under the drive of parallel oil cylinders at both ends. The overturning and reset of the upper roller unloading tipping body is driven by the oil cylinder. In order to improve the rigidity of the lower roller, a support roller is installed in the center of the lower roller, and its lifting is driven by the oil cylinder.
Bu seri levha haddeleme makineleri aşağıdaki belirgin özelliklere sahiptir:
The working roll bearing adopts the self-aligning roller bearing for rolling mill, which has small frictional resistance, less power loss, long service life and low energy consumption.
The synchronous lifting of both ends of the lower roller and the side roller, the control and leveling of the inclination of the winding cone are automatically controlled by the numerical control system, and the control accuracy is high.
The numerical control system is leading in China. It has the functions of screen display, rolling calculation, program control, process parameter storage, software protection and fault alarm.

CNC Plate Rolling Machine description:
The four-roller arc downward adjustment plate rolling machine is independently developed, designed and produced by our company introducing advanced technology from home and abroad. Equipment electrical, hydraulic and other configurations are selected brand. Full hydraulic dual drive, digital program control. The whole machine has advanced structure, superior performance and high efficiency, and it is in the leading position in the same industry at home and abroad.
CNC Plate Rolling Machine structure overview:
Makine esas olarak çerçeve parçası, üst silindir parçası, alt silindir parçası, yan silindir parçası, döner yatak gövdesi parçası, ana şanzıman parçası, hidrolik parça, elektrik parçası, yağlama parçası, temel parça vb.'den oluşur.
Makinenin sol ve sağ rafları makinenin ana gövdesini oluşturan yekpare bir taban üzerine monte edilmiştir. Üst silindirin sol uçtaki yatak gövdesi, dönen yatak gövdesine yerleştirilmiştir ve sağ uçtaki yatak gövdesi, sağ çerçeveye monte edilmiştir.
The upper roll of the machine is the main drive roll, and the hydraulic motor is directly connected to the drive roll through the planetary reducer. The hydraulic motor is equipped with a timely brake, so that the machine can stop in time to achieve the smaller straight edge of the plate. Among them, the position of the upper roller is fixed, and it performs rotating movement; the lower roller and side rollers perform both rotating movement and lifting movement.
Makinenin alt silindirinin yağ silindiri, sol ve sağ çerçevelerin kılavuz oluklarına, yağ silindirinin ileri geri hareketine ve yan silindirlerin yay hareketine monte edilir.
There is an overturning bearing body on the left frame, which can be driven by the overturning oil cylinder to realize opening and closing with the head of the upper roller; there is a balance device at the tail of the upper roller, which can realize the balance of the upper roller when the upper roller and the inverted head frame are opened and cocked. The movement of the working rolls is guided by high-quality linear slides or arcs.

Modeli | MAX Thickness (mm) | MAX Width (mm) | Hız (m/min) | Pre-bending plate Thickness (mm) | Yük MIN Çap (mm) | Top Roller Çap (mm) | Bottom Roller Çap (mm) | Side Roller diameter (mm) | Main Motor Güç (KW) | N.W. (T) | Dimension (mm) |
8×2000 | 8 | 2000 | 6.1 | 6 | 450 | 280 | 260 | 180 | 11 | 8.6 | 5300×1400×1760 |
8×2500 | 8 | 2500 | 6.1 | 6 | 500 | 300 | 280 | 230 | 15 | 8.4 | 6100×2000×2070 |
12×2000 | 12 | 2000 | 5.45 | 10 | 550 | 300 | 280 | 230 | 15 | 15.5 | 5600×2000×2070 |
12×2500 | 12 | 2500 | 5.5 | 10 | 600 | 340 | 300 | 260 | 22 | 16 | 6300×2000×1800 |
16×2000 | 16 | 2000 | 5.5 | 12 | 600 | 340 | 300 | 260 | 22 | 17.5 | 5800×2000×1800 |
12×4000 | 12 | 4000 | 4 | 10 | 800 | 380 | 340 | 280 | 30 | 28.5 | 7600×2000×2150 |
16×2500 | 16 | 2500 | 6.5 | 12 | 600 | 350 | 320 | 280 | 30 | 16 | 6810×2000×1870 |
20×2000 | 20 | 2000 | 6.5 | 12 | 600 | 350 | 320 | 280 | 30 | 24.5 | 6000×2000×1850 |
20×2500 | 20 | 2500 | 6.5 | 16 | 900 | 400 | 380 | 320 | 37 | 32 | 6850×2000×2070 |
20×3000 | 20 | 3000 | 4.5 | 16 | 900 | 450 | 420 | 350 | 45 | 41 | 7310×2100×2200 |
25×2000 | 25 | 2000 | 6.5 | 22 | 800 | 400 | 380 | 320 | 37 | 35 | 6300×2300×2070 |
25×2500 | 25 | 2500 | 5 | 22 | 800 | 450 | 420 | 350 | 45 | 45 | 8000×2600×2100 |
25×3000 | 25 | 3000 | 5 | 22 | 1000 | 480 | 460 | 380 | 55 | 52 | 9000×3200×2500 |
25×4000 | 25 | 4000 | 4 | 22 | 1200 | 540 | 500 | 450 | 63 | 62 | 10100×3500×2900 |
30×2000 | 30 | 2000 | 5 | 25 | 1000 | 450 | 420 | 350 | 45 | 40 | 7500×2600×2500 |
30×2500 | 30 | 2500 | 4.5 | 25 | 1000 | 480 | 460 | 380 | 55 | 50 | 8400×2590×2600 |
30×3000 | 30 | 3000 | 4 | 25 | 1200 | 560 | 520 | 420 | 60 | 61 | 9200×3500×2900 |
30×4000 | 30 | 4000 | 4 | 25 | 1400 | 650 | 600 | 480 | 60 | 75 | 10200×3500×2900 |
40×2000 | 40 | 2000 | 4.5 | 36 | 1000 | 520 | 500 | 400 | 45 | 60 | 8200×3000×2500 |
40×2500 | 40 | 2500 | 4 | 36 | 1200 | 560 | 520 | 420 | 60 | 65 | 8700×3500×2900 |
40×3000 | 40 | 3000 | 4 | 36 | 1500 | 650 | 580 | 480 | 75 | 95 | 9200×3600×3000 |
40×4000 | 40 | 4000 | 3.5 | 36 | 1800 | 710 | 650 | 500 | 86 | 120 | 12500×4000×3500 |
50×2000 | 50 | 2000 | 4 | 45 | 1200 | 650 | 580 | 480 | 60 | 86 | 8500×3500×3000 |
50×2500 | 50 | 2500 | 4.5 | 45 | 1300 | 680 | 620 | 500 | 75 | 96 | 9000×4000×3300 |
50×3200 | 50 | 3200 | 4 | 45 | 1800 | 720 | 650 | 520 | 90 | 110 | 9800×4300×3500 |
65×2500 | 65 | 2500 | 4 | 50 | 1800 | 700 | 650 | 500 | 90 | 108 | 9500×4500×3700 |
60×3000 | 60 | 3000 | 4.5 | 50 | 2000 | 750 | 710 | 560 | 121 | 135 | 10000×4500×3800 |



Tam teknik veriler
| Modeli | 16-2500 |
|---|---|
| Kurşun zamanı | 45 gün |
| Kategori | CNC ve Hareket Kontrolü |
Değerler 20 °C'de nominaldir. CAD modelleri, tork eğrileri ve kontrolör I/O haritaları için veri sayfasını indirin.
Nerede çalışıyor
TROY mühendisleri tarafından boyutlandırıldı ve devreye alındı.
TROY mühendisleri tarafından boyutlandırıldı ve devreye alındı.
TROY mühendisleri tarafından boyutlandırıldı ve devreye alındı.
TROY mühendisleri tarafından boyutlandırıldı ve devreye alındı.
Alıcı soruları
16-2500'ün temel özellikleri nelerdir?
Modeli 16-2500. Talep üzerine tam bir veri sayfası mevcuttur.
16-2500 için teslim süresi ve MOQ nedir?
Teslim süresi 45 gündür; MOQ 1 birimdir.
16-2500 fiyatı nasıl?
Fiyatlandırma, uygun olduğu durumlarda takım ve nakliye dahil olmak üzere konfigürasyon başına fiyatlandırılır.
16-2500 için fiyat teklifi alın
Parçayı, hedef hızı ve hedef bağlantı noktasını ekleyin. Bir chatbot değil, bir mühendis 48 saat içinde yanıt verir.
Aynı kategori
Orta hızlı tel erozyon makinesi TR-RT80
RPNS kontrol sistemi
AMR denetleyicisi SRC-880
TROY Mühendislik tarafından incelendi ·. Spesifikasyonlar her teklifte tedarikçi veri sayfasına göre yeniden kontrol edilir.