
Mesin penggulung plat 4 roll CNC
16-2500 ialah mesin CNC untuk pemesinan CNC / kawalan gerakan. Masa utama ialah 45 hari; harga disebut mengikut konfigurasi. Pensijilan: Dokumentasi CE atas permintaan.
- Model
- 16-2500
- Masa utama
- 45 hari
- kategori
- CNC & Kawalan Pergerakan
Untuk apa platform ini
CNC 4 Roll Plate Rolling Machine applications: This machine is suitable for the bending and forming of metal plates. It can roll round, arc and conical workpieces within a certain range. It has the function of pre-bending the end of the plate, the remaining straight edge is small, and the work efficiency is high.
Istilah komersial
| Sebutharga | Harga bagi setiap konfigurasi — balas dalam masa 48 jam |
|---|---|
| Masa utama | 45 hari |
| MOQ | 1 unit |
| asal usul | China |
| Pelabuhan pemuatan | Shanghai, China |
| Incoterm | FOB Shanghai / CIF on request |
| Bayaran | Deposit 30%, 70% sebelum penghantaran |
| Waranti | Standard 24 bulan, 36 bulan pilihan |
Butiran produk
Nota permohonan, lukisan pembinaan dan video daripada fail kejuruteraan TROY — dokumentasi yang sama dihantar bersama petikan.

CNC 4 Roll Plate Rolling Machine ciri-ciri:
CNC four-roller plate rolling machine can complete the pre-bending and rolling of the end of the sheet metal without turning around the metal sheet at one time. And the remaining straight edge is the smallest among all kinds of plate rolling machines. In this series of plate rolling machines, the upper roll and the upper roll are both driving rolls, driven by hydraulic motors, and the side rolls are driven rolls, which are driven by the friction between the steel plate and each roll to rotate. The position of the upper roller is fixed, and the lower roller and the side roller move up and down under the drive of parallel oil cylinders at both ends. The overturning and reset of the upper roller unloading tipping body is driven by the oil cylinder. In order to improve the rigidity of the lower roller, a support roller is installed in the center of the lower roller, and its lifting is driven by the oil cylinder.
Siri mesin penggulung plat ini mempunyai ciri-ciri penting berikut:
The working roll bearing adopts the self-aligning roller bearing for rolling mill, which has small frictional resistance, less power loss, long service life and low energy consumption.
The synchronous lifting of both ends of the lower roller and the side roller, the control and leveling of the inclination of the winding cone are automatically controlled by the numerical control system, and the control accuracy is high.
The numerical control system is leading in China. It has the functions of screen display, rolling calculation, program control, process parameter storage, software protection and fault alarm.

CNC Plate Rolling Machine description:
The four-roller arc downward adjustment plate rolling machine is independently developed, designed and produced by our company introducing advanced technology from home and abroad. Equipment electrical, hydraulic and other configurations are selected brand. Full hydraulic dual drive, digital program control. The whole machine has advanced structure, superior performance and high efficiency, and it is in the leading position in the same industry at home and abroad.
CNC Plate Rolling Machine structure overview:
Mesin ini terutamanya terdiri daripada bahagian bingkai, bahagian roller atas, bahagian roller bawah, bahagian roller sisi, bahagian badan galas pusing, bahagian penghantaran utama, bahagian hidraulik, bahagian elektrik, bahagian pelincir, bahagian asas dan sebagainya.
Rak kiri dan kanan mesin dipasang pada tapak penting, yang merupakan badan utama mesin. Badan galas hujung kiri penggelek atas dimasukkan ke dalam badan galas pusingan, dan badan galas hujung kanan dipasang pada bingkai kanan.
The upper roll of the machine is the main drive roll, and the hydraulic motor is directly connected to the drive roll through the planetary reducer. The hydraulic motor is equipped with a timely brake, so that the machine can stop in time to achieve the smaller straight edge of the plate. Among them, the position of the upper roller is fixed, and it performs rotating movement; the lower roller and side rollers perform both rotating movement and lifting movement.
Silinder minyak gulungan bawah mesin dipasang di alur panduan bingkai kiri dan kanan, pergerakan salingan silinder minyak, dan pergerakan arka gulungan sisi.
There is an overturning bearing body on the left frame, which can be driven by the overturning oil cylinder to realize opening and closing with the head of the upper roller; there is a balance device at the tail of the upper roller, which can realize the balance of the upper roller when the upper roller and the inverted head frame are opened and cocked. The movement of the working rolls is guided by high-quality linear slides or arcs.

Model | MAX Thickness (mm) | MAX Width (mm) | Kelajuan (m/min) | Pre-bending plate Thickness (mm) | Muatkan MIN Diameter (mm) | Top Roller Diameter (mm) | Bottom Roller Diameter (mm) | Side Roller diameter (mm) | Main Motor kuasa (KW) | N.W. (T) | Dimension (mm) |
8×2000 | 8 | 2000 | 6.1 | 6 | 450 | 280 | 260 | 180 | 11 | 8.6 | 5300×1400×1760 |
8×2500 | 8 | 2500 | 6.1 | 6 | 500 | 300 | 280 | 230 | 15 | 8.4 | 6100×2000×2070 |
12×2000 | 12 | 2000 | 5.45 | 10 | 550 | 300 | 280 | 230 | 15 | 15.5 | 5600×2000×2070 |
12×2500 | 12 | 2500 | 5.5 | 10 | 600 | 340 | 300 | 260 | 22 | 16 | 6300×2000×1800 |
16×2000 | 16 | 2000 | 5.5 | 12 | 600 | 340 | 300 | 260 | 22 | 17.5 | 5800×2000×1800 |
12×4000 | 12 | 4000 | 4 | 10 | 800 | 380 | 340 | 280 | 30 | 28.5 | 7600×2000×2150 |
16×2500 | 16 | 2500 | 6.5 | 12 | 600 | 350 | 320 | 280 | 30 | 16 | 6810×2000×1870 |
20×2000 | 20 | 2000 | 6.5 | 12 | 600 | 350 | 320 | 280 | 30 | 24.5 | 6000×2000×1850 |
20×2500 | 20 | 2500 | 6.5 | 16 | 900 | 400 | 380 | 320 | 37 | 32 | 6850×2000×2070 |
20×3000 | 20 | 3000 | 4.5 | 16 | 900 | 450 | 420 | 350 | 45 | 41 | 7310×2100×2200 |
25×2000 | 25 | 2000 | 6.5 | 22 | 800 | 400 | 380 | 320 | 37 | 35 | 6300×2300×2070 |
25×2500 | 25 | 2500 | 5 | 22 | 800 | 450 | 420 | 350 | 45 | 45 | 8000×2600×2100 |
25×3000 | 25 | 3000 | 5 | 22 | 1000 | 480 | 460 | 380 | 55 | 52 | 9000×3200×2500 |
25×4000 | 25 | 4000 | 4 | 22 | 1200 | 540 | 500 | 450 | 63 | 62 | 10100×3500×2900 |
30×2000 | 30 | 2000 | 5 | 25 | 1000 | 450 | 420 | 350 | 45 | 40 | 7500×2600×2500 |
30×2500 | 30 | 2500 | 4.5 | 25 | 1000 | 480 | 460 | 380 | 55 | 50 | 8400×2590×2600 |
30×3000 | 30 | 3000 | 4 | 25 | 1200 | 560 | 520 | 420 | 60 | 61 | 9200×3500×2900 |
30×4000 | 30 | 4000 | 4 | 25 | 1400 | 650 | 600 | 480 | 60 | 75 | 10200×3500×2900 |
40×2000 | 40 | 2000 | 4.5 | 36 | 1000 | 520 | 500 | 400 | 45 | 60 | 8200×3000×2500 |
40×2500 | 40 | 2500 | 4 | 36 | 1200 | 560 | 520 | 420 | 60 | 65 | 8700×3500×2900 |
40×3000 | 40 | 3000 | 4 | 36 | 1500 | 650 | 580 | 480 | 75 | 95 | 9200×3600×3000 |
40×4000 | 40 | 4000 | 3.5 | 36 | 1800 | 710 | 650 | 500 | 86 | 120 | 12500×4000×3500 |
50×2000 | 50 | 2000 | 4 | 45 | 1200 | 650 | 580 | 480 | 60 | 86 | 8500×3500×3000 |
50×2500 | 50 | 2500 | 4.5 | 45 | 1300 | 680 | 620 | 500 | 75 | 96 | 9000×4000×3300 |
50×3200 | 50 | 3200 | 4 | 45 | 1800 | 720 | 650 | 520 | 90 | 110 | 9800×4300×3500 |
65×2500 | 65 | 2500 | 4 | 50 | 1800 | 700 | 650 | 500 | 90 | 108 | 9500×4500×3700 |
60×3000 | 60 | 3000 | 4.5 | 50 | 2000 | 750 | 710 | 560 | 121 | 135 | 10000×4500×3800 |



Data teknikal penuh
| Model | 16-2500 |
|---|---|
| Masa utama | 45 hari |
| kategori | CNC & Kawalan Pergerakan |
Nilai adalah nominal pada 20 °C. Muat turun lembaran data untuk model cad, lengkung tork dan peta I/O pengawal.
Di mana ia berjalan
Bersaiz dan ditauliahkan oleh jurutera TROY.
Bersaiz dan ditauliahkan oleh jurutera TROY.
Bersaiz dan ditauliahkan oleh jurutera TROY.
Bersaiz dan ditauliahkan oleh jurutera TROY.
Soalan pembeli
Apakah spesifikasi utama 16-2500?
Model 16-2500. Lembaran data penuh tersedia atas permintaan.
Apakah masa utama dan MOQ untuk 16-2500?
Masa utama ialah 45 hari; MOQ ialah 1 unit.
Bagaimana harga 16-2500?
Harga disebut mengikut konfigurasi, termasuk perkakas dan pengangkutan jika berkenaan.
Dapatkan cadangan berharga untuk 16-2500
Sertakan bahagian, kadar sasaran dan pelabuhan destinasi. Seorang jurutera — bukan chatbot — membalas dalam masa 48 jam.
Kategori yang sama
Mesin EDM wayar berkelajuan sederhana TR-RT80
Sistem kawalan RPNS
Pengawal AMR SRC-880
Disemak oleh TROY Kejuruteraan ·. Spesifikasi disemak semula terhadap lembaran data pembekal pada setiap sebut harga.