
Máy cán tấm CNC 4 cuộn
16-2500 là máy CNC dùng để gia công CNC/điều khiển chuyển động. Thời gian thực hiện là 45 ngày; giá được trích dẫn cho mỗi cấu hình. Chứng chỉ: Tài liệu CE theo yêu cầu.
- Người mẫu
- 16-2500
- thời gian dẫn
- 45 ngày
- Loại
- CNC & Điều khiển chuyển động
Nền tảng này dùng để làm gì
CNC 4 Roll Plate Rolling Machine applications: This machine is suitable for the bending and forming of metal plates. It can roll round, arc and conical workpieces within a certain range. It has the function of pre-bending the end of the plate, the remaining straight edge is small, and the work efficiency is high.
Điều kiện thương mại
| Trích dẫn | Định giá theo cấu hình - trả lời trong vòng 48 giờ |
|---|---|
| thời gian dẫn | 45 ngày |
| MOQ | 1 đơn vị |
| Nguồn gốc | Trung Quốc |
| Cảng bốc hàng | Shanghai, China |
| Incoterm | FOB Shanghai / CIF on request |
| Sự chi trả | Đặt cọc 30%, 70% trước khi giao hàng |
| Bảo hành | Tiêu chuẩn 24 tháng, tùy chọn 36 tháng |
Chi tiết sản phẩm
Ghi chú ứng dụng, bản vẽ xây dựng và video từ tệp kỹ thuật TROY - cùng một tài liệu được gửi cùng với báo giá.

CNC 4 Roll Plate Rolling Machine Đặc trưng:
CNC four-roller plate rolling machine can complete the pre-bending and rolling of the end of the sheet metal without turning around the metal sheet at one time. And the remaining straight edge is the smallest among all kinds of plate rolling machines. In this series of plate rolling machines, the upper roll and the upper roll are both driving rolls, driven by hydraulic motors, and the side rolls are driven rolls, which are driven by the friction between the steel plate and each roll to rotate. The position of the upper roller is fixed, and the lower roller and the side roller move up and down under the drive of parallel oil cylinders at both ends. The overturning and reset of the upper roller unloading tipping body is driven by the oil cylinder. In order to improve the rigidity of the lower roller, a support roller is installed in the center of the lower roller, and its lifting is driven by the oil cylinder.
Dòng máy cán tấm này có những đặc điểm nổi bật sau:
The working roll bearing adopts the self-aligning roller bearing for rolling mill, which has small frictional resistance, less power loss, long service life and low energy consumption.
The synchronous lifting of both ends of the lower roller and the side roller, the control and leveling of the inclination of the winding cone are automatically controlled by the numerical control system, and the control accuracy is high.
The numerical control system is leading in China. It has the functions of screen display, rolling calculation, program control, process parameter storage, software protection and fault alarm.

CNC Plate Rolling Machine description:
The four-roller arc downward adjustment plate rolling machine is independently developed, designed and produced by our company introducing advanced technology from home and abroad. Equipment electrical, hydraulic and other configurations are selected brand. Full hydraulic dual drive, digital program control. The whole machine has advanced structure, superior performance and high efficiency, and it is in the leading position in the same industry at home and abroad.
CNC Plate Rolling Machine structure overview:
Máy chủ yếu bao gồm phần khung, phần con lăn trên, phần con lăn dưới, phần con lăn bên, phần thân ổ trục quay, bộ phận truyền động chính, bộ phận thủy lực, bộ phận điện, bộ phận bôi trơn, bộ phận cơ bản, v.v.
Các giá đỡ bên trái và bên phải của máy được lắp đặt trên một đế liền khối, tạo thành phần thân chính của máy. Thân ổ trục đầu bên trái của con lăn phía trên được đóng vào thân ổ trục quay và thân ổ trục đầu bên phải được lắp vào khung bên phải.
The upper roll of the machine is the main drive roll, and the hydraulic motor is directly connected to the drive roll through the planetary reducer. The hydraulic motor is equipped with a timely brake, so that the machine can stop in time to achieve the smaller straight edge of the plate. Among them, the position of the upper roller is fixed, and it performs rotating movement; the lower roller and side rollers perform both rotating movement and lifting movement.
Xi lanh dầu của cuộn dưới của máy được lắp vào các rãnh dẫn hướng của khung bên trái và bên phải, chuyển động tịnh tiến của xi lanh dầu và chuyển động vòng cung của các cuộn bên.
There is an overturning bearing body on the left frame, which can be driven by the overturning oil cylinder to realize opening and closing with the head of the upper roller; there is a balance device at the tail of the upper roller, which can realize the balance of the upper roller when the upper roller and the inverted head frame are opened and cocked. The movement of the working rolls is guided by high-quality linear slides or arcs.

Người mẫu | MAX Thickness (mm) | MAX Width (mm) | Tốc độ (m/min) | Pre-bending plate Thickness (mm) | Trọng tải MIN Đường kính (mm) | Top Roller Đường kính (mm) | Bottom Roller Đường kính (mm) | Side Roller diameter (mm) | Main Động cơ Quyền lực (KW) | N.W. (T) | Dimension (mm) |
8×2000 | 8 | 2000 | 6.1 | 6 | 450 | 280 | 260 | 180 | 11 | 8.6 | 5300×1400×1760 |
8×2500 | 8 | 2500 | 6.1 | 6 | 500 | 300 | 280 | 230 | 15 | 8.4 | 6100×2000×2070 |
12×2000 | 12 | 2000 | 5.45 | 10 | 550 | 300 | 280 | 230 | 15 | 15.5 | 5600×2000×2070 |
12×2500 | 12 | 2500 | 5.5 | 10 | 600 | 340 | 300 | 260 | 22 | 16 | 6300×2000×1800 |
16×2000 | 16 | 2000 | 5.5 | 12 | 600 | 340 | 300 | 260 | 22 | 17.5 | 5800×2000×1800 |
12×4000 | 12 | 4000 | 4 | 10 | 800 | 380 | 340 | 280 | 30 | 28.5 | 7600×2000×2150 |
16×2500 | 16 | 2500 | 6.5 | 12 | 600 | 350 | 320 | 280 | 30 | 16 | 6810×2000×1870 |
20×2000 | 20 | 2000 | 6.5 | 12 | 600 | 350 | 320 | 280 | 30 | 24.5 | 6000×2000×1850 |
20×2500 | 20 | 2500 | 6.5 | 16 | 900 | 400 | 380 | 320 | 37 | 32 | 6850×2000×2070 |
20×3000 | 20 | 3000 | 4.5 | 16 | 900 | 450 | 420 | 350 | 45 | 41 | 7310×2100×2200 |
25×2000 | 25 | 2000 | 6.5 | 22 | 800 | 400 | 380 | 320 | 37 | 35 | 6300×2300×2070 |
25×2500 | 25 | 2500 | 5 | 22 | 800 | 450 | 420 | 350 | 45 | 45 | 8000×2600×2100 |
25×3000 | 25 | 3000 | 5 | 22 | 1000 | 480 | 460 | 380 | 55 | 52 | 9000×3200×2500 |
25×4000 | 25 | 4000 | 4 | 22 | 1200 | 540 | 500 | 450 | 63 | 62 | 10100×3500×2900 |
30×2000 | 30 | 2000 | 5 | 25 | 1000 | 450 | 420 | 350 | 45 | 40 | 7500×2600×2500 |
30×2500 | 30 | 2500 | 4.5 | 25 | 1000 | 480 | 460 | 380 | 55 | 50 | 8400×2590×2600 |
30×3000 | 30 | 3000 | 4 | 25 | 1200 | 560 | 520 | 420 | 60 | 61 | 9200×3500×2900 |
30×4000 | 30 | 4000 | 4 | 25 | 1400 | 650 | 600 | 480 | 60 | 75 | 10200×3500×2900 |
40×2000 | 40 | 2000 | 4.5 | 36 | 1000 | 520 | 500 | 400 | 45 | 60 | 8200×3000×2500 |
40×2500 | 40 | 2500 | 4 | 36 | 1200 | 560 | 520 | 420 | 60 | 65 | 8700×3500×2900 |
40×3000 | 40 | 3000 | 4 | 36 | 1500 | 650 | 580 | 480 | 75 | 95 | 9200×3600×3000 |
40×4000 | 40 | 4000 | 3.5 | 36 | 1800 | 710 | 650 | 500 | 86 | 120 | 12500×4000×3500 |
50×2000 | 50 | 2000 | 4 | 45 | 1200 | 650 | 580 | 480 | 60 | 86 | 8500×3500×3000 |
50×2500 | 50 | 2500 | 4.5 | 45 | 1300 | 680 | 620 | 500 | 75 | 96 | 9000×4000×3300 |
50×3200 | 50 | 3200 | 4 | 45 | 1800 | 720 | 650 | 520 | 90 | 110 | 9800×4300×3500 |
65×2500 | 65 | 2500 | 4 | 50 | 1800 | 700 | 650 | 500 | 90 | 108 | 9500×4500×3700 |
60×3000 | 60 | 3000 | 4.5 | 50 | 2000 | 750 | 710 | 560 | 121 | 135 | 10000×4500×3800 |



Dữ liệu kỹ thuật đầy đủ
| Người mẫu | 16-2500 |
|---|---|
| thời gian dẫn | 45 ngày |
| Loại | CNC & Điều khiển chuyển động |
Các giá trị danh nghĩa ở 20°C. Tải xuống bảng dữ liệu cho các mô hình cad, đường cong mô-men xoắn và bản đồ I/O của bộ điều khiển.
Nó chạy ở đâu
Được xác định kích thước và ủy quyền bởi các kỹ sư TROY.
Được xác định kích thước và ủy quyền bởi các kỹ sư TROY.
Được xác định kích thước và ủy quyền bởi các kỹ sư TROY.
Được xác định kích thước và ủy quyền bởi các kỹ sư TROY.
Câu hỏi của người mua
Các thông số kỹ thuật chính của 16-2500 là gì?
Mẫu 16-2500. Một bảng dữ liệu đầy đủ có sẵn theo yêu cầu.
Thời gian giao hàng và MOQ cho 16-2500 là bao nhiêu?
Thời gian thực hiện là 45 ngày; MOQ là 1 đơn vị.
16-2500 giá thế nào?
Giá được trích dẫn cho mỗi cấu hình, bao gồm cả dụng cụ và cước phí nếu có.
Nhận đề xuất giá 16-2500
Bao gồm phần, tỷ lệ mục tiêu và cổng đích. Một kỹ sư – không phải chatbot – sẽ trả lời trong vòng 48 giờ.
Cùng danh mục
Máy EDM dây tốc độ trung bình TR-RT80
Hệ thống điều khiển RPNS
Bộ điều khiển AMR SRC-880
Được đánh giá bởi TROY Engineering ·. Các thông số kỹ thuật được kiểm tra lại dựa trên bảng dữ liệu của nhà cung cấp ở mỗi báo giá.