
4-валковый листопрокатный станок с ЧПУ
16-2500 — это станок с ЧПУ для обработки/управления движением. Срок выполнения 45 дней; Цена указана за конфигурацию. Сертификаты: Документация CE по запросу.
- Модель
- 16-2500
- Время выполнения
- 45 дней
- Категория
- ЧПУ и управление движением
Для чего нужна эта платформа
CNC 4 Roll Plate Rolling Machine applications: This machine is suitable for the bending and forming of metal plates. It can roll round, arc and conical workpieces within a certain range. It has the function of pre-bending the end of the plate, the remaining straight edge is small, and the work efficiency is high.
Коммерческие условия
| Предложение | Цена указана за конфигурацию — ответ в течение 48 часов. |
|---|---|
| Время выполнения | 45 дней |
| минимальный заказ | 1 единица |
| Источник | Китай |
| Порт погрузки | Shanghai, China |
| Инкотермс | FOB Shanghai / CIF on request |
| Оплата | 30% депозит, 70% перед отправкой |
| Гарантия | 24 месяца стандартно, 36 месяцев опционально |
Подробности о продукте
Рекомендации по применению, строительные чертежи и видео из инженерного файла TROY — та же документация, которая поставляется вместе с предложением.

CNC 4 Roll Plate Rolling Machine Функции:
CNC four-roller plate rolling machine can complete the pre-bending and rolling of the end of the sheet metal without turning around the metal sheet at one time. And the remaining straight edge is the smallest among all kinds of plate rolling machines. In this series of plate rolling machines, the upper roll and the upper roll are both driving rolls, driven by hydraulic motors, and the side rolls are driven rolls, which are driven by the friction between the steel plate and each roll to rotate. The position of the upper roller is fixed, and the lower roller and the side roller move up and down under the drive of parallel oil cylinders at both ends. The overturning and reset of the upper roller unloading tipping body is driven by the oil cylinder. In order to improve the rigidity of the lower roller, a support roller is installed in the center of the lower roller, and its lifting is driven by the oil cylinder.
Эта серия листопрокатных станков имеет следующие существенные особенности:
The working roll bearing adopts the self-aligning roller bearing for rolling mill, which has small frictional resistance, less power loss, long service life and low energy consumption.
The synchronous lifting of both ends of the lower roller and the side roller, the control and leveling of the inclination of the winding cone are automatically controlled by the numerical control system, and the control accuracy is high.
The numerical control system is leading in China. It has the functions of screen display, rolling calculation, program control, process parameter storage, software protection and fault alarm.

CNC Plate Rolling Machine description:
The four-roller arc downward adjustment plate rolling machine is independently developed, designed and produced by our company introducing advanced technology from home and abroad. Equipment electrical, hydraulic and other configurations are selected brand. Full hydraulic dual drive, digital program control. The whole machine has advanced structure, superior performance and high efficiency, and it is in the leading position in the same industry at home and abroad.
CNC Plate Rolling Machine structure overview:
Машина в основном состоит из рамной части, верхней части ролика, нижней части ролика, части бокового ролика, части корпуса поворотного подшипника, части главной передачи, гидравлической части, электрической части, смазочной части, базовой части и так далее.
Левая и правая стойки машины установлены на цельном основании, которое составляет основной корпус машины. Корпус левого концевого подшипника верхнего ролика упакован в корпус поворотного подшипника, а корпус правого концевого подшипника установлен в правой раме.
The upper roll of the machine is the main drive roll, and the hydraulic motor is directly connected to the drive roll through the planetary reducer. The hydraulic motor is equipped with a timely brake, so that the machine can stop in time to achieve the smaller straight edge of the plate. Among them, the position of the upper roller is fixed, and it performs rotating movement; the lower roller and side rollers perform both rotating movement and lifting movement.
Масляный цилиндр нижнего валка машины установлен в направляющих пазах левой и правой рам, возвратно-поступательное движение масляного цилиндра и дуговое перемещение боковых валков.
There is an overturning bearing body on the left frame, which can be driven by the overturning oil cylinder to realize opening and closing with the head of the upper roller; there is a balance device at the tail of the upper roller, which can realize the balance of the upper roller when the upper roller and the inverted head frame are opened and cocked. The movement of the working rolls is guided by high-quality linear slides or arcs.

Модель | MAX Thickness (mm) | MAX Width (mm) | Скорость (m/min) | Pre-bending plate Thickness (mm) | Нагрузка MIN Диаметр (mm) | Top Roller Диаметр (mm) | Bottom Roller Диаметр (mm) | Side Roller diameter (mm) | Main Мотор Власть (KW) | N.W. (T) | Dimension (mm) |
8×2000 | 8 | 2000 | 6.1 | 6 | 450 | 280 | 260 | 180 | 11 | 8.6 | 5300×1400×1760 |
8×2500 | 8 | 2500 | 6.1 | 6 | 500 | 300 | 280 | 230 | 15 | 8.4 | 6100×2000×2070 |
12×2000 | 12 | 2000 | 5.45 | 10 | 550 | 300 | 280 | 230 | 15 | 15.5 | 5600×2000×2070 |
12×2500 | 12 | 2500 | 5.5 | 10 | 600 | 340 | 300 | 260 | 22 | 16 | 6300×2000×1800 |
16×2000 | 16 | 2000 | 5.5 | 12 | 600 | 340 | 300 | 260 | 22 | 17.5 | 5800×2000×1800 |
12×4000 | 12 | 4000 | 4 | 10 | 800 | 380 | 340 | 280 | 30 | 28.5 | 7600×2000×2150 |
16×2500 | 16 | 2500 | 6.5 | 12 | 600 | 350 | 320 | 280 | 30 | 16 | 6810×2000×1870 |
20×2000 | 20 | 2000 | 6.5 | 12 | 600 | 350 | 320 | 280 | 30 | 24.5 | 6000×2000×1850 |
20×2500 | 20 | 2500 | 6.5 | 16 | 900 | 400 | 380 | 320 | 37 | 32 | 6850×2000×2070 |
20×3000 | 20 | 3000 | 4.5 | 16 | 900 | 450 | 420 | 350 | 45 | 41 | 7310×2100×2200 |
25×2000 | 25 | 2000 | 6.5 | 22 | 800 | 400 | 380 | 320 | 37 | 35 | 6300×2300×2070 |
25×2500 | 25 | 2500 | 5 | 22 | 800 | 450 | 420 | 350 | 45 | 45 | 8000×2600×2100 |
25×3000 | 25 | 3000 | 5 | 22 | 1000 | 480 | 460 | 380 | 55 | 52 | 9000×3200×2500 |
25×4000 | 25 | 4000 | 4 | 22 | 1200 | 540 | 500 | 450 | 63 | 62 | 10100×3500×2900 |
30×2000 | 30 | 2000 | 5 | 25 | 1000 | 450 | 420 | 350 | 45 | 40 | 7500×2600×2500 |
30×2500 | 30 | 2500 | 4.5 | 25 | 1000 | 480 | 460 | 380 | 55 | 50 | 8400×2590×2600 |
30×3000 | 30 | 3000 | 4 | 25 | 1200 | 560 | 520 | 420 | 60 | 61 | 9200×3500×2900 |
30×4000 | 30 | 4000 | 4 | 25 | 1400 | 650 | 600 | 480 | 60 | 75 | 10200×3500×2900 |
40×2000 | 40 | 2000 | 4.5 | 36 | 1000 | 520 | 500 | 400 | 45 | 60 | 8200×3000×2500 |
40×2500 | 40 | 2500 | 4 | 36 | 1200 | 560 | 520 | 420 | 60 | 65 | 8700×3500×2900 |
40×3000 | 40 | 3000 | 4 | 36 | 1500 | 650 | 580 | 480 | 75 | 95 | 9200×3600×3000 |
40×4000 | 40 | 4000 | 3.5 | 36 | 1800 | 710 | 650 | 500 | 86 | 120 | 12500×4000×3500 |
50×2000 | 50 | 2000 | 4 | 45 | 1200 | 650 | 580 | 480 | 60 | 86 | 8500×3500×3000 |
50×2500 | 50 | 2500 | 4.5 | 45 | 1300 | 680 | 620 | 500 | 75 | 96 | 9000×4000×3300 |
50×3200 | 50 | 3200 | 4 | 45 | 1800 | 720 | 650 | 520 | 90 | 110 | 9800×4300×3500 |
65×2500 | 65 | 2500 | 4 | 50 | 1800 | 700 | 650 | 500 | 90 | 108 | 9500×4500×3700 |
60×3000 | 60 | 3000 | 4.5 | 50 | 2000 | 750 | 710 | 560 | 121 | 135 | 10000×4500×3800 |



Полные технические данные
| Модель | 16-2500 |
|---|---|
| Время выполнения | 45 дней |
| Категория | ЧПУ и управление движением |
Значения являются номинальными при 20 °C. Загрузите техническое описание моделей CAD, кривых крутящего момента и карт ввода-вывода контроллера.
Где он работает
Размеры и заказ инженеров TROY.
Размеры и заказ инженеров TROY.
Размеры и заказ инженеров TROY.
Размеры и заказ инженеров TROY.
Вопросы покупателя
Каковы основные характеристики 16-2500?
Модель 16-2500. Полная техническая информация предоставляется по запросу.
Каково время выполнения заказа и минимальный заказ для 16-2500?
Срок выполнения 45 дней; Минимальный заказ – 1 единица.
Какова цена 16-2500?
Цены указаны за конфигурацию, включая инструменты и транспортировку, где это применимо.
Получить ценовое предложение за 16-2500
Укажите деталь, целевую скорость и порт назначения. Инженер, а не чат-бот, отвечает в течение 48 часов.
Та же категория
Среднескоростной электроэрозионный станок TR-RT80
Система управления РПНС
Контроллер AMR SRC-880
Отзыв от TROY Engineering ·. Спецификации повторно проверяются по данным поставщика при каждом предложении.