
CNC 4 rullplåtsvalsmaskin
The 16-2500 is a CNC machine for CNC machining / motion control. Ledtiden är 45 dagar; priset anges per konfiguration. Certifieringar: CE-dokumentation på begäran.
- Modell
- 16-2500
- Ledtid
- 45 dagar
- Kategori
- CNC och rörelsekontroll
Vad den här plattformen är till för
CNC 4 Roll Plate Rolling Machine applications: This machine is suitable for the bending and forming of metal plates. It can roll round, arc and conical workpieces within a certain range. It has the function of pre-bending the end of the plate, the remaining straight edge is small, and the work efficiency is high.
Kommersiella villkor
| Citat | Pris per konfiguration — svara inom 48 timmar |
|---|---|
| Ledtid | 45 dagar |
| MOQ | 1 enhet |
| Ursprung | Kina |
| Lastningshamn | Shanghai, China |
| Incoterm | FOB Shanghai / CIF on request |
| Betalning | 30% deposition, 70% före leverans |
| Garanti | 24 månader standard, 36 månader valfritt |
Produktdetaljer
Ansökningsnoteringar, konstruktionsritningar och video från TROY ingenjörsfilen — samma dokumentation som levererades med offerten.

CNC 4 Roll Plate Rolling Machine Drag:
CNC four-roller plate rolling machine can complete the pre-bending and rolling of the end of the sheet metal without turning around the metal sheet at one time. And the remaining straight edge is the smallest among all kinds of plate rolling machines. In this series of plate rolling machines, the upper roll and the upper roll are both driving rolls, driven by hydraulic motors, and the side rolls are driven rolls, which are driven by the friction between the steel plate and each roll to rotate. The position of the upper roller is fixed, and the lower roller and the side roller move up and down under the drive of parallel oil cylinders at both ends. The overturning and reset of the upper roller unloading tipping body is driven by the oil cylinder. In order to improve the rigidity of the lower roller, a support roller is installed in the center of the lower roller, and its lifting is driven by the oil cylinder.
Denna serie av plåtvalsmaskiner har följande framträdande egenskaper:
The working roll bearing adopts the self-aligning roller bearing for rolling mill, which has small frictional resistance, less power loss, long service life and low energy consumption.
The synchronous lifting of both ends of the lower roller and the side roller, the control and leveling of the inclination of the winding cone are automatically controlled by the numerical control system, and the control accuracy is high.
The numerical control system is leading in China. It has the functions of screen display, rolling calculation, program control, process parameter storage, software protection and fault alarm.

CNC Plate Rolling Machine description:
The four-roller arc downward adjustment plate rolling machine is independently developed, designed and produced by our company introducing advanced technology from home and abroad. Equipment electrical, hydraulic and other configurations are selected brand. Full hydraulic dual drive, digital program control. The whole machine has advanced structure, superior performance and high efficiency, and it is in the leading position in the same industry at home and abroad.
CNC Plate Rolling Machine structure overview:
Maskinen består huvudsakligen av ramdel, övre rulldel, nedre rulldel, sidorulldel, vridande lagerkroppsdel, huvudtransmissionsdel, hydraulisk del, elektrisk del, smörjdel, basdel och så vidare.
Maskinens vänstra och högra ställ är installerade på en integrerad bas, som utgör maskinens huvuddel. Den vänstra ändlagerkroppen på den övre rullen är packad i den vridande lagerkroppen och den högra ändlagerkroppen är installerad i den högra ramen.
The upper roll of the machine is the main drive roll, and the hydraulic motor is directly connected to the drive roll through the planetary reducer. The hydraulic motor is equipped with a timely brake, so that the machine can stop in time to achieve the smaller straight edge of the plate. Among them, the position of the upper roller is fixed, and it performs rotating movement; the lower roller and side rollers perform both rotating movement and lifting movement.
Oljecylindern på maskinens nedre rulle är installerad i styrspåren på vänster och höger ram, oljecylinderns fram- och återgående rörelse och sidorullarnas bågrörelse.
There is an overturning bearing body on the left frame, which can be driven by the overturning oil cylinder to realize opening and closing with the head of the upper roller; there is a balance device at the tail of the upper roller, which can realize the balance of the upper roller when the upper roller and the inverted head frame are opened and cocked. The movement of the working rolls is guided by high-quality linear slides or arcs.

Modell | MAX Thickness (mm) | MAX Width (mm) | Hastighet (m/min) | Pre-bending plate Thickness (mm) | Ladda MIN Diameter (mm) | Top Roller Diameter (mm) | Bottom Roller Diameter (mm) | Side Roller diameter (mm) | Main Motor Driva (KW) | N.W. (T) | Dimension (mm) |
8×2000 | 8 | 2000 | 6.1 | 6 | 450 | 280 | 260 | 180 | 11 | 8.6 | 5300×1400×1760 |
8×2500 | 8 | 2500 | 6.1 | 6 | 500 | 300 | 280 | 230 | 15 | 8.4 | 6100×2000×2070 |
12×2000 | 12 | 2000 | 5.45 | 10 | 550 | 300 | 280 | 230 | 15 | 15.5 | 5600×2000×2070 |
12×2500 | 12 | 2500 | 5.5 | 10 | 600 | 340 | 300 | 260 | 22 | 16 | 6300×2000×1800 |
16×2000 | 16 | 2000 | 5.5 | 12 | 600 | 340 | 300 | 260 | 22 | 17.5 | 5800×2000×1800 |
12×4000 | 12 | 4000 | 4 | 10 | 800 | 380 | 340 | 280 | 30 | 28.5 | 7600×2000×2150 |
16×2500 | 16 | 2500 | 6.5 | 12 | 600 | 350 | 320 | 280 | 30 | 16 | 6810×2000×1870 |
20×2000 | 20 | 2000 | 6.5 | 12 | 600 | 350 | 320 | 280 | 30 | 24.5 | 6000×2000×1850 |
20×2500 | 20 | 2500 | 6.5 | 16 | 900 | 400 | 380 | 320 | 37 | 32 | 6850×2000×2070 |
20×3000 | 20 | 3000 | 4.5 | 16 | 900 | 450 | 420 | 350 | 45 | 41 | 7310×2100×2200 |
25×2000 | 25 | 2000 | 6.5 | 22 | 800 | 400 | 380 | 320 | 37 | 35 | 6300×2300×2070 |
25×2500 | 25 | 2500 | 5 | 22 | 800 | 450 | 420 | 350 | 45 | 45 | 8000×2600×2100 |
25×3000 | 25 | 3000 | 5 | 22 | 1000 | 480 | 460 | 380 | 55 | 52 | 9000×3200×2500 |
25×4000 | 25 | 4000 | 4 | 22 | 1200 | 540 | 500 | 450 | 63 | 62 | 10100×3500×2900 |
30×2000 | 30 | 2000 | 5 | 25 | 1000 | 450 | 420 | 350 | 45 | 40 | 7500×2600×2500 |
30×2500 | 30 | 2500 | 4.5 | 25 | 1000 | 480 | 460 | 380 | 55 | 50 | 8400×2590×2600 |
30×3000 | 30 | 3000 | 4 | 25 | 1200 | 560 | 520 | 420 | 60 | 61 | 9200×3500×2900 |
30×4000 | 30 | 4000 | 4 | 25 | 1400 | 650 | 600 | 480 | 60 | 75 | 10200×3500×2900 |
40×2000 | 40 | 2000 | 4.5 | 36 | 1000 | 520 | 500 | 400 | 45 | 60 | 8200×3000×2500 |
40×2500 | 40 | 2500 | 4 | 36 | 1200 | 560 | 520 | 420 | 60 | 65 | 8700×3500×2900 |
40×3000 | 40 | 3000 | 4 | 36 | 1500 | 650 | 580 | 480 | 75 | 95 | 9200×3600×3000 |
40×4000 | 40 | 4000 | 3.5 | 36 | 1800 | 710 | 650 | 500 | 86 | 120 | 12500×4000×3500 |
50×2000 | 50 | 2000 | 4 | 45 | 1200 | 650 | 580 | 480 | 60 | 86 | 8500×3500×3000 |
50×2500 | 50 | 2500 | 4.5 | 45 | 1300 | 680 | 620 | 500 | 75 | 96 | 9000×4000×3300 |
50×3200 | 50 | 3200 | 4 | 45 | 1800 | 720 | 650 | 520 | 90 | 110 | 9800×4300×3500 |
65×2500 | 65 | 2500 | 4 | 50 | 1800 | 700 | 650 | 500 | 90 | 108 | 9500×4500×3700 |
60×3000 | 60 | 3000 | 4.5 | 50 | 2000 | 750 | 710 | 560 | 121 | 135 | 10000×4500×3800 |



Fullständiga tekniska data
| Modell | 16-2500 |
|---|---|
| Ledtid | 45 dagar |
| Kategori | CNC och rörelsekontroll |
Värdena är nominella vid 20 °C. Ladda ner databladet för cad-modeller, vridmomentkurvor och styrenhets I/O-kartor.
Där det går
Dimensionerad och beställd av TROY ingenjörer.
Dimensionerad och beställd av TROY ingenjörer.
Dimensionerad och beställd av TROY ingenjörer.
Dimensionerad och beställd av TROY ingenjörer.
Köparens frågor
Vilka är de viktigaste specifikationerna för 16-2500?
Modell 16-2500. Ett fullständigt datablad finns tillgängligt på begäran.
Vad är ledtiden och MOQ för 16-2500?
Ledtiden är 45 dagar; MOQ är 1 enhet.
Hur är 16-2500 prissatt?
Priset anges per konfiguration, inklusive verktyg och frakt där tillämpligt.
Få ett prissatt förslag för 16-2500
Inkludera del, målpris och destinationsport. En ingenjör – inte en chatbot – svarar inom 48 timmar.
Samma kategori
Medelhastighet för tråd-EDM-maskin TR-RT80
RPNS styrsystem
AMR-kontroller SRC-880
Recenserad av TROY Engineering ·. Specifikationerna kontrolleras på nytt mot leverantörens datablad vid varje offert.