How to Specify a Welding Robot Cell without a Sales Call
Six numbers decide 80% of the cell cost. Get them before you talk to any integrator.
Start with the Part, Not the Robot
Measure the longest weld seam, the part weight and the fixture envelope. Reach is set by the far corner of the fixture plus 150 mm, not by the brochure.
Then the Rate
Count spots or seam length per shift, add 15% for rework, and divide by available seconds. That number — not the robot's repeatability — decides whether one cell is enough.
Then the Gun
For 0.8–1.2 mm steel, a 1 kHz MFDC gun with water cooling is the default. Servo guns earn their premium when you weld aluminium or need force compensation.
Then the Fixture
A fixture that holds ±0.3 mm lets a ±0.05 mm robot produce a good part. A fixture that moves will make every weld a negotiation.
Then the Fume
Extraction at the torch is cheaper than extraction at the roof, and it keeps the light curtain clean.
Finally, the File
Ask for the CE file, risk assessment, weld schedule and FAT checklist before you sign. If the integrator cannot list them, the cell is not finished.