Chuyển đến nội dung
Kỹ sư bán hàng trực tuyến · 09:00–21:00 CST Bảo An, Thâm Quyến, Trung Quốc
+86 400 098 8557 Nói chuyện với một kỹ sư
Trang chủ/Tin tức/Ngành công nghiệp
Ngành công nghiệp

Thiết bị sản xuất vải thổi tan chảy, máy làm mặt nạ hướng dẫn quy trình sản xuất vải thổi tan chảy

Melt blown cloth is to use high-speed hot air flow to draw the thin stream of polymer melt extruded from the nozzle hole of the die, thereby forming ultra-fine fibers and collecting them on the mesh…

Thiết bị sản xuất vải thổi tan chảy, máy làm mặt nạ hướng dẫn quy trình sản xuất vải thổi tan chảy

Vải thổi nóng chảy là sử dụng luồng khí nóng tốc độ cao để hút dòng polyme nóng chảy mỏng đùn ra từ lỗ phun của khuôn, từ đó tạo thành các sợi siêu mịn và thu thập chúng trên rèm lưới hoặc con lăn, đồng thời liên kết với nhau để trở thành vải không dệt Melt-blown.

The meltblown fabric widths of regular manufacturers are generally 1600mm, 2400mm, 3200mm, and the extruder diameters are usually 90mm, 105mm, 135mm. However, after the epidemic began, the small computers (that is, the ones used by the Yangzhong family workshop) were small in width, usually only tens of centimeters, and the screw diameters were mostly 45mm, 50mm, and 65mm.

Loại máy này có sản lượng thấp, chất lượng thấp nhưng giá thành rẻ, thời gian giao hàng nhanh. Giá trước dịch chỉ 20.000 đến 20.000 nhưng nay đã tăng lên 200.000 nhưng vẫn rẻ hơn rất nhiều so với máy đùn của các hãng sản xuất thông thường. Hiện nay,máy thổi vải tan chảytừ 1600 nhà sản xuất thông thường phổ thông trên thị trường có giá hơn 6 triệu nhân dân tệ và thời gian giao hàng hơn 2 tháng.

Quy trình sản xuất vải thổi tan chảy chủ yếu như sau:

1. Chuẩn bị nấu chảy

2. Lọc

3. Đo lường

4. Chất tan chảy được đùn ra từ lỗ

5. Vẽ nhỏ giọt và làm mát

6. vào lưới

Tổng quan và nguyên lý của thiết bị vải thổi nóng chảy

Thổi tan chảy là phương pháp dựa vào luồng không khí ở nhiệt độ cao, tốc độ cao để thổi polyme tan chảy sao cho nó có thể được kéo căng nhanh chóng để chuẩn bị sợi.

Sau khi các chip polymer được làm nóng và tạo áp suất bằng máy đùn trục vít ở trạng thái nóng chảy, chúng sẽ đến lỗ máy trộn ở đầu trước của vòi thông qua kênh phân phối tan chảy, sau đó được kéo căng bởi hai luồng không khí nhiệt độ cao và tốc độ cao hội tụ để làm cho chúng mỏng đi.

Sợi mỏng được làm nguội và đông đặc trên thiết bị lưới để tạo thành vải không dệt tan chảy.

Máy thổi vải tan chảy

Các thành phần của thiết bị vải thổi tan chảy

Các thiết bị chính như đầu thổi nóng chảy, linh kiện thiết bị hệ thống sạc tự động, máy làm sạch siêu âm, máy sưởi không khí, quạt ly tâm, máy đùn trục vít, máy tạo hình web thổi nóng chảy, máy cuộn dây ngoại tuyến thổi tan chảy, máy rạch ngoại tuyến thổi nóng chảy.

Thành phần cốt lõi của thiết bị vải thổi tan --- máy trộn

The spinneret for melt spinning is a representative spinneret for the manufacture of synthetic fibers such as polyester and nylon. The thermoplastic resin is heated and melted, and it is extruded through the spinneret in air or water at a certain speed and cooled. Spinning method that solidifies into fibers.

The core technology is the small nozzle on the spinneret. This nozzle is not only small in size, only 0.15mm, but also has a complex hole pattern on such a small nozzle, which is extremely difficult to process, and the nozzle processing process requires Several months. If the processing accuracy is not high, the final meltblown cloth produced will not meet the corresponding technical requirements, which will affect the protective performance of the mask.

Cấu trúc của máy trộn vải thổi tan chảy

The structure of the spinneret is divided into three forms according to the shape of the spinneret, round, fan and rectangular. At present, circular plates and rectangular plates are used more at home and abroad. In order to be suitable for different kinds of chemical fiber spinning occasions, round spinnerets are divided into flat plate type, flange plate type, plate ring, flange ring, etc.: rectangular spinneret is divided into flange rectangle and flange groove rectangle, etc. , It is mostly used for short fiber spinning with more holes.

Cấu trúc máy trộn vải thổi tan chảy

Đầu chết tan chảy

The die head includes a die head main body, a spinneret and an air plate. The spinneret and the air plate are detachably installed in the die head body. There is a spinneret hole in the spinneret, and there are several gaps between the spinneret and the air plate. There are several gas circulation channels in the main body of the die head, and the gas circulation channels are connected with the gap groove. The outer wall of the die head body is provided with a gas pipe connection end, which is connected to the gas collection cavity through a gas pipe Through, one end of the spinneret hole of the spinneret is fixedly connected with an interval flow stabilizing piece, and the other end of the spinneret is fixedly connected with a pipe connection device.

Lỗ máy trộn được kết nối với cổng xả của máy đùn trục vít thông qua thiết bị kết nối đường ống Connected.

In meltblown equipment, meltblown die is one of the core components to realize high polymer wire drawing. The design and accuracy directly affect the length, uniformity, toughness, fineness and many other aspects of the wire drawing, thereby affecting the quality of the final coil. Have a decisive impact.

Cấu trúc đầu khuôn Meltblown

Máy sưởi không khí thổi nóng chảy

That is, the pipeline heater is composed of a body and a control system. The heating element is made of stainless steel pipe as a protective sleeve, high temperature resistance alloy wire, crystalline magnesium oxide powder, formed by a compression process, and the control part adopts advanced digital circuits and integrated circuit triggers. , High back pressure thyristor and other components constitute an adjustable temperature measurement and constant temperature system to ensure the normal operation of the electric heater.

Máy sưởi không khí thổi nóng chảy

Polypropylene materials are extracted from petroleum. Currently, Sinopec and other companies can produce them in large quantities, but the equipment that produces polypropylene as melt blown cloth, especially the core components and spinnerets, mainly depends on imports. These suppliers mainly include Japan's Kasen spinneret, German Enka, and Japanese spinneret. Japanese suppliers occupy the most important position. With the current output of several companies, it is far from satisfying the market demand.

Therefore, the production capacity of masks ultimately depends on the output of the melt blown cloth production equipment, and the core spinneret nozzle of the melt blown cloth production equipment is very difficult to produce. The processing time takes several months, and the output cannot be greatly increased in a short time. And the production capacity is very limited, which also makes the mask production can only maximize the use of current equipment and increase production by extending the working time of the production line.

Cấu hình thiết bị chính

1. Máy đùn trục vít; 2. Bơm định lượng; 3. Thiết bị thổi tan chảy; 4. Lưới thu; 5. Thiết bị cuộn dây; 6. Thiết bị cho ăn.

Thiết bị của dây chuyền sản xuất liên tục vải không dệt tan chảy cao khoảng 6m, rộng 5m và dài 20m. Thiết bị sản xuất như sau:

(1) Máy đùn trục vít: Đường kính trục vít thường là 100 ~ 120mm và tỷ lệ chiều dài/đường kính là 30. Mục đích của nó là làm tan chảy các lát cắt.

(2) Bơm định lượng: Chức năng của nó là đo lường, kiểm soát chính xác đầu ra và độ mịn của sợi. Nó là một máy bơm bánh răng liên tục cung cấp hỗn hợp tan chảy cho máy trộn.

(3) Bộ lọc nóng chảy: Chức năng của nó là lọc các tạp chất trong nóng chảy để tránh làm tắc các lỗ của máy trộn.

(4) Màn lưới truyền tải: Sợi thổi nóng chảy được tiếp nhận và trải đều trên lưới và vận chuyển về phía trước. Phía dưới có quạt hút để thoát khí nóng từ trên xuống.

(5) Spinning box: It is the key equipment of the melt-blown process. There is a strip-shaped spinneret, which is covered with a long row of spinneret holes. Generally, there are about 1500 nozzle holes per m. The two sides of the spinneret are equipped with hot air nozzles, and there are hot air nozzles underneath, which form an angle of 50b with the nozzle holes. After the fiber is ejected, the high-speed hot air is used to stretch the air flow immediately to blow the fiber and become superfine fiber.

(6) Hệ thống cấp liệu: Gồm 3 phễu đo, dùng để đo lát trắng, hạt màu và chất phụ gia. 3 thành phần vào máy trộn trộn bên dưới trộn đều rồi đưa vào sản xuất.

(7) Máy thổi khí nóng và máy sưởi: cung cấp nhiệt độ và áp suất của khí nóng được sử dụng trong việc hút luồng khí quay, sử dụng điện để sưởi ấm và tiêu thụ nhiều điện năng.

(8) The coiling machine adopts automatic coiling, and the melt blown cloth is packaged in rolls. Meltblown nonwovens are characterized by ultra-fine fibers, and the smallest fiber diameter can reach 0.5Lm, generally between 1~5Lm. The finer the fiber, the better the quality of meltblown cloth, but the output is relatively reduced. Because the fiber is ultra-fine, its specific surface area is large, and the adsorption capacity is strong, which is the most prominent advantage of melt blown cloth.

Nếu bạn quan tâm đến máy làm vải thổi tan chảy thì có thể truy cập vào link để xem chi tiết hơn và video demo bên dưới:https://www.troysupply.com/1200-1600mm-width-melt-blown-fabric-machine_p130.html

Cảm ơn rất nhiều từ TROY!

Cần điều này được chỉ định cho dòng của bạn?Gửi bộ phận, tỷ lệ mục tiêu và quốc gia - kỹ sư sẽ trả lời trong vòng 48 giờ.

Yêu cầu báo giá
Có liên quan

Thêm bài viết

TROY Trợ lýKỹ sư bán hàng · trả lời sau vài giây
Xin chào - Tôi là bot kỹ sư bán hàng của TROY.
Hãy cho tôi biết bạn cần tự động hóa những gì: trọng lượng bộ phận, phạm vi tiếp cận hoặc thời gian chu kỳ là đủ. Tôi trả lời bằng ngôn ngữ của bạn và có thể đưa bạn đến trước một kỹ sư con người trong 48 giờ.
Không có giá nào được công bố - báo giá cho mỗi cấu hình trong vòng 48 giờ ·mẫu báo giá