メルトブローン生地とは、ダイのノズル穴から押し出されたポリマー溶融物の細い流れを高速の熱風で引き込み、極細繊維を形成してメッシュカーテンやローラー上に集め、同時に繊維同士が接着してメルトブローン不織布となります。
The meltblown fabric widths of regular manufacturers are generally 1600mm, 2400mm, 3200mm, and the extruder diameters are usually 90mm, 105mm, 135mm. However, after the epidemic began, the small computers (that is, the ones used by the Yangzhong family workshop) were small in width, usually only tens of centimeters, and the screw diameters were mostly 45mm, 50mm, and 65mm.
この種の機械は生産量が少なく品質も低いですが、コストが安く、納期も早いです。流行前の価格はわずか2万〜2万でしたが、現在は20万まで値上がりしましたが、それでも通常のメーカーの押出機よりははるかに安いです。現時点では、メルトブローン生地機械市場で主流の1600の正規メーカーは600万元以上で販売しており、納期は2か月以上です。
メルトブローン生地の製造プロセスは主に次のとおりです。
1. 溶融物の準備
2. フィルター
3. 測定
4. 溶融物がオリフィスから押し出されます
5. メルトトリクル描画と冷却
6. ネットの中へ
メルトブロー布装置の概要と原理
メルトブローイングは、高温高速空気流を利用してポリマー溶融物を吹き飛ばし、ポリマーを素早く引き伸ばして繊維を準備する方法です。
ポリマーチップはスクリュー押出機で加熱・加圧されて溶融状態になった後、溶融物分配路を通ってノズル先端の口金穴に到達し、2つの収束する高速・高温の気流によって引き伸ばされて薄くなります。
細くなった繊維はメッシュ装置上で冷却固化され、メルトブローン不織布が形成されます。
メルトブローン布装置のコンポーネント
メルトブローンヘッド、自動充填システム機器部品、超音波洗浄機、エアヒーター、遠心ファン、スクリュー押出機、メルトブローンウェブ成形機、メルトブローンオフライン巻取機、メルトブローンオフラインスリッティングマシンなどの主要設備。
メルトブローン布装置の核心部品---口金
The spinneret for melt spinning is a representative spinneret for the manufacture of synthetic fibers such as polyester and nylon. The thermoplastic resin is heated and melted, and it is extruded through the spinneret in air or water at a certain speed and cooled. Spinning method that solidifies into fibers.
The core technology is the small nozzle on the spinneret. This nozzle is not only small in size, only 0.15mm, but also has a complex hole pattern on such a small nozzle, which is extremely difficult to process, and the nozzle processing process requires Several months. If the processing accuracy is not high, the final meltblown cloth produced will not meet the corresponding technical requirements, which will affect the protective performance of the mask.
メルトブローン紡糸口金の構造
The structure of the spinneret is divided into three forms according to the shape of the spinneret, round, fan and rectangular. At present, circular plates and rectangular plates are used more at home and abroad. In order to be suitable for different kinds of chemical fiber spinning occasions, round spinnerets are divided into flat plate type, flange plate type, plate ring, flange ring, etc.: rectangular spinneret is divided into flange rectangle and flange groove rectangle, etc. , It is mostly used for short fiber spinning with more holes.
メルトブローン紡糸口金構造
メルトブローンダイヘッド
The die head includes a die head main body, a spinneret and an air plate. The spinneret and the air plate are detachably installed in the die head body. There is a spinneret hole in the spinneret, and there are several gaps between the spinneret and the air plate. There are several gas circulation channels in the main body of the die head, and the gas circulation channels are connected with the gap groove. The outer wall of the die head body is provided with a gas pipe connection end, which is connected to the gas collection cavity through a gas pipe Through, one end of the spinneret hole of the spinneret is fixedly connected with an interval flow stabilizing piece, and the other end of the spinneret is fixedly connected with a pipe connection device.
口金穴はパイプ接続装置を介してスクリュー押出機の吐出口に接続されている。
In meltblown equipment, meltblown die is one of the core components to realize high polymer wire drawing. The design and accuracy directly affect the length, uniformity, toughness, fineness and many other aspects of the wire drawing, thereby affecting the quality of the final coil. Have a decisive impact.
メルトブローンダイヘッド構造
メルトブローンエアヒーター
That is, the pipeline heater is composed of a body and a control system. The heating element is made of stainless steel pipe as a protective sleeve, high temperature resistance alloy wire, crystalline magnesium oxide powder, formed by a compression process, and the control part adopts advanced digital circuits and integrated circuit triggers. , High back pressure thyristor and other components constitute an adjustable temperature measurement and constant temperature system to ensure the normal operation of the electric heater.
メルトブローンエアヒーター
Polypropylene materials are extracted from petroleum. Currently, Sinopec and other companies can produce them in large quantities, but the equipment that produces polypropylene as melt blown cloth, especially the core components and spinnerets, mainly depends on imports. These suppliers mainly include Japan's Kasen spinneret, German Enka, and Japanese spinneret. Japanese suppliers occupy the most important position. With the current output of several companies, it is far from satisfying the market demand.
Therefore, the production capacity of masks ultimately depends on the output of the melt blown cloth production equipment, and the core spinneret nozzle of the melt blown cloth production equipment is very difficult to produce. The processing time takes several months, and the output cannot be greatly increased in a short time. And the production capacity is very limited, which also makes the mask production can only maximize the use of current equipment and increase production by extending the working time of the production line.
主な装置構成
1. スクリュー押出機; 2.定量ポンプ;メルトブロー装置; 4. 4. 受信ネット。 5. 巻取り装置; 6. 供給装置。
メルトブローン不織布の連続生産ラインの設備は高さ約6メートル、幅約5メートル、長さ約20メートル。生産設備は以下の通りです。
(1) スクリュー押出機: スクリューの直径は通常 100 ~ 120 mm、長さ/直径の比は 30 です。その目的はスライスを溶融することです。
(2) 定量ポンプ: その機能は、繊維の出力と繊度を正確に測定、制御することです。溶融物を紡糸口金まで連続的に送り出すギアポンプです。
(3) 溶融フィルター: その機能は、紡糸口金の穴の詰まりを避けるために溶融中の不純物を濾過することです。
(4) ネットカーテンの搬送:メルトブローン繊維をネット上に均一に受け止めて広げ、前方へ搬送します。その下には吸引ファンがあり、上部から降りてくる熱気を排出します。
(5) Spinning box: It is the key equipment of the melt-blown process. There is a strip-shaped spinneret, which is covered with a long row of spinneret holes. Generally, there are about 1500 nozzle holes per m. The two sides of the spinneret are equipped with hot air nozzles, and there are hot air nozzles underneath, which form an angle of 50b with the nozzle holes. After the fiber is ejected, the high-speed hot air is used to stretch the air flow immediately to blow the fiber and become superfine fiber.
(6) 供給システム: 3 つの計量ホッパーで構成され、白スライス、マスターバッチ、添加剤の計量に使用されます。 3つの成分は下の混合ミキサーに入り均一に混合され、生産されます。
(7) 熱風送風機とヒーター: 旋回気流描画に使用される熱風の温度と圧力を提供し、加熱するために電気を使用し、多くの電力を消費します。
(8) The coiling machine adopts automatic coiling, and the melt blown cloth is packaged in rolls. Meltblown nonwovens are characterized by ultra-fine fibers, and the smallest fiber diameter can reach 0.5Lm, generally between 1~5Lm. The finer the fiber, the better the quality of meltblown cloth, but the output is relatively reduced. Because the fiber is ultra-fine, its specific surface area is large, and the adsorption capacity is strong, which is the most prominent advantage of melt blown cloth.
メルトブローン生地製造機に興味がある場合は、以下のリンクにアクセスして詳細とビデオデモをご覧ください。https://www.troysupply.com/1200-1600mm-width-melt-blown-fabric-machine_p130.html
TROYから本当にありがとう!


