Vai al contenuto
Ingegneri commerciali online · 09:00–21:00 CST Bao'an, Shenzhen, Cina
Home/Notizie/Industria
Industria

Attrezzature per la produzione di tessuti soffiati a fusione, istruzioni per il processo di produzione di tessuti soffiati a fusione per macchine per maschere

Melt blown cloth is to use high-speed hot air flow to draw the thin stream of polymer melt extruded from the nozzle hole of the die, thereby forming ultra-fine fibers and collecting them on the mesh…

Attrezzature per la produzione di tessuti soffiati a fusione, istruzioni per il processo di produzione di tessuti soffiati a fusione per macchine per maschere

Il tessuto soffiato a fusione consiste nell'utilizzare un flusso di aria calda ad alta velocità per aspirare il sottile flusso di polimero fuso estruso dal foro dell'ugello dello stampo, formando così fibre ultrafini e raccogliendole sulla tenda a rete o sul rullo e allo stesso tempo legandosi per diventare tessuto non tessuto soffiato a fusione.

The meltblown fabric widths of regular manufacturers are generally 1600mm, 2400mm, 3200mm, and the extruder diameters are usually 90mm, 105mm, 135mm. However, after the epidemic began, the small computers (that is, the ones used by the Yangzhong family workshop) were small in width, usually only tens of centimeters, and the screw diameters were mostly 45mm, 50mm, and 65mm.

Questo tipo di macchina ha una bassa produttività e una bassa qualità, ma il costo è economico e i tempi di consegna sono rapidi. Prima dell'epidemia il prezzo era solo di 20.000-20.000, ora è salito a 200.000, ma è ancora molto più economico dell'estrusore dei normali produttori. Allo stato attuale, ilmacchina per tessuti soffiati a fusionedai principali 1600 produttori regolari sul mercato vende per più di 6 milioni di yuan e i tempi di consegna sono più di 2 mesi.

Il processo di produzione del tessuto melt-blown è principalmente il seguente:

1. Preparazione della fusione

2. Filtra

3. Misurazione

4. La massa fusa viene estrusa dall'orifizio

5. Sciogliere il gocciolamento e il raffreddamento

6. in rete

Panoramica e principio dell'attrezzatura per tessuti soffiati a fusione

Il melt-blowing è un metodo che si basa su un flusso d'aria ad alta temperatura e alta velocità per soffiare il polimero fuso in modo che possa essere rapidamente allungato per preparare le fibre.

Dopo che i trucioli di polimero sono stati riscaldati e pressurizzati da un estrusore a vite in uno stato fuso, raggiungono il foro della filiera sull'estremità anteriore dell'ugello attraverso il canale di distribuzione del materiale fuso e vengono quindi allungati da due flussi d'aria convergenti ad alta velocità e alta temperatura per renderli sottili.

La fibra assottigliata viene raffreddata e solidificata sul dispositivo a rete per formare un tessuto non tessuto soffiato a fusione.

Macchina per tessuti soffiati a fusione

Componenti di apparecchiature per tessuti soffiati a fusione

Attrezzature chiave come testa soffiata a fusione, componenti dell'attrezzatura del sistema di ricarica automatica, macchina per la pulizia a ultrasuoni, riscaldatore d'aria, ventola centrifuga, estrusore a vite, macchina per la formazione di nastri soffiati a fusione, avvolgitrice offline soffiata a fusione, macchina da taglio offline soffiata a fusione.

Il componente principale dell'attrezzatura per tessuti soffiati a fusione: la filiera

The spinneret for melt spinning is a representative spinneret for the manufacture of synthetic fibers such as polyester and nylon. The thermoplastic resin is heated and melted, and it is extruded through the spinneret in air or water at a certain speed and cooled. Spinning method that solidifies into fibers.

The core technology is the small nozzle on the spinneret. This nozzle is not only small in size, only 0.15mm, but also has a complex hole pattern on such a small nozzle, which is extremely difficult to process, and the nozzle processing process requires Several months. If the processing accuracy is not high, the final meltblown cloth produced will not meet the corresponding technical requirements, which will affect the protective performance of the mask.

Struttura della filiera in tela soffiata a fusione

The structure of the spinneret is divided into three forms according to the shape of the spinneret, round, fan and rectangular. At present, circular plates and rectangular plates are used more at home and abroad. In order to be suitable for different kinds of chemical fiber spinning occasions, round spinnerets are divided into flat plate type, flange plate type, plate ring, flange ring, etc.: rectangular spinneret is divided into flange rectangle and flange groove rectangle, etc. , It is mostly used for short fiber spinning with more holes.

Struttura di filiera in tela soffiata a fusione

Testa per filiera meltblown

The die head includes a die head main body, a spinneret and an air plate. The spinneret and the air plate are detachably installed in the die head body. There is a spinneret hole in the spinneret, and there are several gaps between the spinneret and the air plate. There are several gas circulation channels in the main body of the die head, and the gas circulation channels are connected with the gap groove. The outer wall of the die head body is provided with a gas pipe connection end, which is connected to the gas collection cavity through a gas pipe Through, one end of the spinneret hole of the spinneret is fixedly connected with an interval flow stabilizing piece, and the other end of the spinneret is fixedly connected with a pipe connection device.

Il foro della filiera è collegato alla porta di scarico dell'estrusore a vite tramite il dispositivo di collegamento del tubo Connected.

In meltblown equipment, meltblown die is one of the core components to realize high polymer wire drawing. The design and accuracy directly affect the length, uniformity, toughness, fineness and many other aspects of the wire drawing, thereby affecting the quality of the final coil. Have a decisive impact.

Struttura della testa della filiera in fusione di fusione

Riscaldatore d'aria soffiato a fusione

That is, the pipeline heater is composed of a body and a control system. The heating element is made of stainless steel pipe as a protective sleeve, high temperature resistance alloy wire, crystalline magnesium oxide powder, formed by a compression process, and the control part adopts advanced digital circuits and integrated circuit triggers. , High back pressure thyristor and other components constitute an adjustable temperature measurement and constant temperature system to ensure the normal operation of the electric heater.

Riscaldatore d'aria soffiato a fusione

Polypropylene materials are extracted from petroleum. Currently, Sinopec and other companies can produce them in large quantities, but the equipment that produces polypropylene as melt blown cloth, especially the core components and spinnerets, mainly depends on imports. These suppliers mainly include Japan's Kasen spinneret, German Enka, and Japanese spinneret. Japanese suppliers occupy the most important position. With the current output of several companies, it is far from satisfying the market demand.

Therefore, the production capacity of masks ultimately depends on the output of the melt blown cloth production equipment, and the core spinneret nozzle of the melt blown cloth production equipment is very difficult to produce. The processing time takes several months, and the output cannot be greatly increased in a short time. And the production capacity is very limited, which also makes the mask production can only maximize the use of current equipment and increase production by extending the working time of the production line.

Configurazione del dispositivo principale

1. Estrusore a vite; 2. Pompa dosatrice; 3. Dispositivo di soffiaggio della fusione; 4. Rete ricevente; 5. Dispositivo di avvolgimento; 6. Dispositivo di alimentazione.

L'attrezzatura della linea di produzione continua di non tessuti meltblown è alta circa 6 metri, larga 5 metri e lunga 20 metri. Le attrezzature produttive sono le seguenti:

(1) Estrusore a vite: il diametro della vite è generalmente 100~120 mm e il rapporto lunghezza/diametro è 30. Il suo scopo è sciogliere le fette.

(2) Pompa dosatrice: la sua funzione è misurare e controllare accuratamente la produzione e la finezza della fibra. Si tratta di una pompa a ingranaggi che fornisce continuamente il materiale fuso alla filiera.

(3) Filtro del materiale fuso: la sua funzione è quella di filtrare le impurità presenti nel materiale fuso per evitare di intasare i fori della filiera.

(4) Trasporto della cortina di rete: la fibra soffiata a fusione viene ricevuta e distribuita uniformemente sulla rete e trasportata in avanti. Sotto è presente una ventola di aspirazione per scaricare l'aria calda che scende dall'alto.

(5) Spinning box: It is the key equipment of the melt-blown process. There is a strip-shaped spinneret, which is covered with a long row of spinneret holes. Generally, there are about 1500 nozzle holes per m. The two sides of the spinneret are equipped with hot air nozzles, and there are hot air nozzles underneath, which form an angle of 50b with the nozzle holes. After the fiber is ejected, the high-speed hot air is used to stretch the air flow immediately to blow the fiber and become superfine fiber.

(6) Sistema di alimentazione: è composto da 3 tramogge di misurazione, utilizzate per misurare fette bianche, masterbatch e additivi. I 3 componenti entrano nel mixer sottostante per mescolarsi uniformemente e poi messi in produzione.

(7) Ventilatore e riscaldatore di aria calda: fornisce la temperatura e la pressione dell'aria calda utilizzata nel disegno del flusso d'aria rotante, utilizza l'elettricità per riscaldare e consuma molta energia.

(8) The coiling machine adopts automatic coiling, and the melt blown cloth is packaged in rolls. Meltblown nonwovens are characterized by ultra-fine fibers, and the smallest fiber diameter can reach 0.5Lm, generally between 1~5Lm. The finer the fiber, the better the quality of meltblown cloth, but the output is relatively reduced. Because the fiber is ultra-fine, its specific surface area is large, and the adsorption capacity is strong, which is the most prominent advantage of melt blown cloth.

Se sei interessato alle macchine per la produzione di tessuti soffiati a fusione, puoi visitare il collegamento per maggiori dettagli e la demo video di seguito:https://www.troysupply.com/1200-1600mm-width-melt-blown-fabric-machine_p130.html

Molte grazie da TROY!

Hai bisogno di questo specificato per la tua linea?Invia il componente, la tariffa prevista e il paese: un tecnico risponde entro 48 ore.

Richiedi un preventivo
Imparentato

Altri articoli

TROY AssistenteIngegnere commerciale · risponde in pochi secondi
Ciao, sono il bot tecnico delle vendite di TROY.
Dimmi cosa ti serve per automatizzare: il peso del pezzo, lo sbraccio o il tempo ciclo sono sufficienti. Rispondo nella tua lingua e posso metterti di fronte a un ingegnere umano in 48 ore.
Nessun prezzo pubblicato: preventivo per configurazione entro 48 ore ·modulo di preventivo