Tkanina foukaná z taveniny má používat vysokorychlostní proud horkého vzduchu k vytahování tenkého proudu taveniny polymeru vytlačovaného z otvoru trysky matrice, čímž se vytváří ultrajemná vlákna a shromažďují je na síťovaném závěsu nebo válci a současně se spojují, aby se stala netkanou textilií foukanou z taveniny.
The meltblown fabric widths of regular manufacturers are generally 1600mm, 2400mm, 3200mm, and the extruder diameters are usually 90mm, 105mm, 135mm. However, after the epidemic began, the small computers (that is, the ones used by the Yangzhong family workshop) were small in width, usually only tens of centimeters, and the screw diameters were mostly 45mm, 50mm, and 65mm.
Tento druh stroje má nízký výkon a nízkou kvalitu, ale náklady jsou levné a dodací lhůta je rychlá. Cena před epidemií byla jen 20 000 až 20 000, nyní se zvedla na 200 000, ale stále je mnohem levnější než extrudér běžných výrobců. V současné době jestroj na textil vyfukovaný z taveninyod hlavního proudu 1600 běžných výrobců na trhu se prodává za více než 6 milionů juanů a dodací lhůta je více než 2 měsíce.
Výrobní proces tkaniny vyfukované z taveniny je hlavně následující:
1. Příprava taveniny
2. Filtr
3. Měření
4. Tavenina je vytlačována z otvoru
5. Tažení taveniny a chlazení
6. do sítě
Přehled a princip zařízení na foukání taveniny
Vyfukování taveniny je metoda, která spoléhá na vysokoteplotní a vysokorychlostní proudění vzduchu k vyfukování taveniny polymeru, aby mohla být rychle natažena pro přípravu vláken.
Poté, co se polymerní třísky zahřejí a natlakují šnekovým extrudérem do roztaveného stavu, dosáhnou otvoru zvlákňovací trysky na předním konci trysky kanálem pro distribuci taveniny a poté jsou protahovány dvěma konvergentními vysokorychlostními a vysokoteplotními proudy vzduchu, aby byly tenké.
Ztenčené vlákno se ochladí a ztuhne na sítovém zařízení za vzniku netkané textilie vyfukované z taveniny.
Součásti zařízení pro tkaniny vyfukované z taveniny
Klíčové vybavení, jako je hlava vyfukovaná z taveniny, součásti zařízení automatického nabíjecího systému, ultrazvukový čisticí stroj, ohřívač vzduchu, odstředivý ventilátor, šnekový extrudér, stroj na tvarování pásu vyfukováním z taveniny, offline navíjecí stroj vyfukovaný z taveniny, offline řezací stroj vyfukovaný z taveniny.
Základní komponenta zařízení na foukání z taveniny --- zvlákňovací tryska
The spinneret for melt spinning is a representative spinneret for the manufacture of synthetic fibers such as polyester and nylon. The thermoplastic resin is heated and melted, and it is extruded through the spinneret in air or water at a certain speed and cooled. Spinning method that solidifies into fibers.
The core technology is the small nozzle on the spinneret. This nozzle is not only small in size, only 0.15mm, but also has a complex hole pattern on such a small nozzle, which is extremely difficult to process, and the nozzle processing process requires Several months. If the processing accuracy is not high, the final meltblown cloth produced will not meet the corresponding technical requirements, which will affect the protective performance of the mask.
Struktura zvlákňovací trysky foukané z taveniny
The structure of the spinneret is divided into three forms according to the shape of the spinneret, round, fan and rectangular. At present, circular plates and rectangular plates are used more at home and abroad. In order to be suitable for different kinds of chemical fiber spinning occasions, round spinnerets are divided into flat plate type, flange plate type, plate ring, flange ring, etc.: rectangular spinneret is divided into flange rectangle and flange groove rectangle, etc. , It is mostly used for short fiber spinning with more holes.
Struktura zvlákňovací trysky foukané z taveniny
Meltblown zemnící hlava
The die head includes a die head main body, a spinneret and an air plate. The spinneret and the air plate are detachably installed in the die head body. There is a spinneret hole in the spinneret, and there are several gaps between the spinneret and the air plate. There are several gas circulation channels in the main body of the die head, and the gas circulation channels are connected with the gap groove. The outer wall of the die head body is provided with a gas pipe connection end, which is connected to the gas collection cavity through a gas pipe Through, one end of the spinneret hole of the spinneret is fixedly connected with an interval flow stabilizing piece, and the other end of the spinneret is fixedly connected with a pipe connection device.
Otvor zvlákňovací trysky je připojen k výstupnímu portu šnekového extrudéru prostřednictvím připojeného zařízení pro připojení potrubí.
In meltblown equipment, meltblown die is one of the core components to realize high polymer wire drawing. The design and accuracy directly affect the length, uniformity, toughness, fineness and many other aspects of the wire drawing, thereby affecting the quality of the final coil. Have a decisive impact.
Struktura hlavy vyfukované taveniny
Ohřívač vzduchu foukaný taveninou
That is, the pipeline heater is composed of a body and a control system. The heating element is made of stainless steel pipe as a protective sleeve, high temperature resistance alloy wire, crystalline magnesium oxide powder, formed by a compression process, and the control part adopts advanced digital circuits and integrated circuit triggers. , High back pressure thyristor and other components constitute an adjustable temperature measurement and constant temperature system to ensure the normal operation of the electric heater.
Ohřívač vzduchu foukaný taveninou
Polypropylene materials are extracted from petroleum. Currently, Sinopec and other companies can produce them in large quantities, but the equipment that produces polypropylene as melt blown cloth, especially the core components and spinnerets, mainly depends on imports. These suppliers mainly include Japan's Kasen spinneret, German Enka, and Japanese spinneret. Japanese suppliers occupy the most important position. With the current output of several companies, it is far from satisfying the market demand.
Therefore, the production capacity of masks ultimately depends on the output of the melt blown cloth production equipment, and the core spinneret nozzle of the melt blown cloth production equipment is very difficult to produce. The processing time takes several months, and the output cannot be greatly increased in a short time. And the production capacity is very limited, which also makes the mask production can only maximize the use of current equipment and increase production by extending the working time of the production line.
Konfigurace hlavního zařízení
1. Šnekový extrudér; 2. Dávkovací čerpadlo; 3. Zařízení pro foukání taveniny; 4. Přijímací síť; 5. Navíjecí zařízení; 6. Krmicí zařízení.
Zařízení kontinuální výrobní linky meltblown netkaných textilií je cca 6m vysoké, 5m široké a 20m dlouhé. Výrobní zařízení je následující:
(1) Šnekový extrudér: Průměr šneku je obecně 100~120 mm a poměr délka/průměr je 30. Jeho účelem je roztavit plátky.
(2) Dávkovací čerpadlo: Jeho funkcí je přesně měřit, řídit výkon a jemnost vlákna. Je to zubové čerpadlo, které nepřetržitě dodává taveninu do zvlákňovací trysky.
(3) Filtr taveniny: Jeho funkcí je odfiltrovat nečistoty v tavenině, aby se zabránilo ucpání otvorů zvlákňovací trysky.
(4) Závěs dopravní sítě: Vlákno vyfukované z taveniny je rovnoměrně přijímáno a rozprostřeno na síti a přepravováno vpřed. Pod ním je sací ventilátor, který odvádí horký vzduch přicházející shora.
(5) Spinning box: It is the key equipment of the melt-blown process. There is a strip-shaped spinneret, which is covered with a long row of spinneret holes. Generally, there are about 1500 nozzle holes per m. The two sides of the spinneret are equipped with hot air nozzles, and there are hot air nozzles underneath, which form an angle of 50b with the nozzle holes. After the fiber is ejected, the high-speed hot air is used to stretch the air flow immediately to blow the fiber and become superfine fiber.
(6) Napájecí systém: Skládá se ze 3 odměrných násypek, které se používají k měření bílých plátků, předsměsi a přísad. Tyto 3 složky vstupují do mísícího mixéru níže, aby se rovnoměrně promíchaly, a poté jsou uvedeny do výroby.
(7) Horkovzdušné dmychadlo a ohřívač: poskytují teplotu a tlak horkého vzduchu použitého při rotujícím proudění vzduchu, využívají elektřinu k ohřevu a spotřebují hodně energie.
(8) The coiling machine adopts automatic coiling, and the melt blown cloth is packaged in rolls. Meltblown nonwovens are characterized by ultra-fine fibers, and the smallest fiber diameter can reach 0.5Lm, generally between 1~5Lm. The finer the fiber, the better the quality of meltblown cloth, but the output is relatively reduced. Because the fiber is ultra-fine, its specific surface area is large, and the adsorption capacity is strong, which is the most prominent advantage of melt blown cloth.
Pokud máte zájem o stroje na výrobu tkanin vyfukovaných z taveniny, můžete navštívit odkaz pro další podrobnosti a video demo níže:https://www.troysupply.com/1200-1600mm-width-melt-blown-fabric-machine_p130.html
Mnohokrát děkujeme od TROY!


