Pular para o conteúdo
Engenheiros de vendas online · 09:00–21:00 CST Bao'an, Shenzhen, China
Início/Base de conhecimento/Paletização
Paletização · atualizado em 16/11/2026

Como especificar um robô paletizador em quatro números

O tamanho do palete, o peso da caixa, a altura da pilha e as caixas por minuto decidem o braço. Todo o resto – pinça, segurança, software – decorre desses quatro.

Start with the pallet, not the robot

A palletizing arm has to reach the far corner of the tallest stack, not the middle of a conveyor. Measure the pallet footprint (1200×1000 and 1200×800 mm cover most of Europe; 1219×1016 mm is the US GMA size), the load height including the pallet itself, and the height of the infeed conveyor. The arm's working envelope must cover the worst-case corner at full stack height — that corner is what sets the reach, not the near side.

Payload is the case plus the gripper

Take the heaviest case, add the gripper (a vacuum tool for cartons is usually 15–40 kg, a mechanical clamp for bags more), add 15–20 % for acceleration and off-centre loads. Our four-axis palletizing line covers 30 kg to 800 kg: the TR1030B-185 handles 30 kg at 1,850 mm, the TR10165B-310 covers 165 kg at 3,100 mm, and the TR10800B-300 goes to 800 kg. A mid-size case line usually lands on the 165 kg class once the gripper and margin are counted — buyers regularly under-specify this by one size.

Cycle time decides the axis count

Four-axis arms are faster and cheaper for floor-level palletizing because they do not need to reorient the wrist. If the pattern needs the case rotated on every pick — mixed SKU pallets, labels facing out — a six-axis arm or a servo gripper that rotates is the better answer. Ask for the pattern software with the quote: a line that needs an engineer to reprogram every SKU change is not the same purchase as one where the operator picks a pattern from a screen.

O que nos enviar

A photo of the pallet as it is stacked today, the case weight and dimensions, cases per minute, the infeed height, and the plant's voltage. With those five we return a cell layout, the arm model, the gripper concept and a lead time. Standard palletizing arms ship in 15–40 days depending on payload class.

Questions we get asked

Que carga devo escolher se minhas malas pesarem 20 kg?

Conte a pinça e uma margem de 15–20%: 20 kg de caixa mais uma ferramenta a vácuo de 25 kg ficam perto da classe de 50–60 kg, portanto um braço de 30 kg geralmente é muito pequeno e um braço de 165 kg é confortável.

Um robô pode paletizar duas linhas de produção?

Sim, se as linhas estiverem ao alcance e o tempo do ciclo permitir a viagem. Dois transportadores de alimentação em uma célula são comuns; a restrição é o software padrão enfileirar ambas as linhas sem morrer de fome.

Eu preciso de uma cerca?

Um braço de paletização de quatro eixos em alta velocidade normalmente funciona atrás de uma cerca de luz ou de um scanner de segurança. A paletização baseada em Cobot existe, mas está limitada ao limite inferior da faixa de peso.

Machines this applies to

Pergunte a um engenheiro sobre o seu caso

Keep reading

TROY AssistenteEngenheiro de vendas · responde em segundos
Olá, sou o bot engenheiro de vendas de TROY.
Diga-me o que você precisa para automatizar: o peso da peça, o alcance ou o tempo de ciclo são suficientes. Eu respondo no seu idioma e posso colocá-lo na frente de um engenheiro humano em 48 horas.
Não há preços publicados — cotação por configuração em 48 horas ·formulário de cotação