Hoe u een palletiseerrobot in vier cijfers specificeert
Palletgrootte, doosgewicht, stapelhoogte en dozen per minuut bepalen de arm. Al het andere – grijper, veiligheid, software – volgt uit die vier.
Start with the pallet, not the robot
A palletizing arm has to reach the far corner of the tallest stack, not the middle of a conveyor. Measure the pallet footprint (1200×1000 and 1200×800 mm cover most of Europe; 1219×1016 mm is the US GMA size), the load height including the pallet itself, and the height of the infeed conveyor. The arm's working envelope must cover the worst-case corner at full stack height — that corner is what sets the reach, not the near side.
Payload is the case plus the gripper
Take the heaviest case, add the gripper (a vacuum tool for cartons is usually 15–40 kg, a mechanical clamp for bags more), add 15–20 % for acceleration and off-centre loads. Our four-axis palletizing line covers 30 kg to 800 kg: the TR1030B-185 handles 30 kg at 1,850 mm, the TR10165B-310 covers 165 kg at 3,100 mm, and the TR10800B-300 goes to 800 kg. A mid-size case line usually lands on the 165 kg class once the gripper and margin are counted — buyers regularly under-specify this by one size.
Cycle time decides the axis count
Four-axis arms are faster and cheaper for floor-level palletizing because they do not need to reorient the wrist. If the pattern needs the case rotated on every pick — mixed SKU pallets, labels facing out — a six-axis arm or a servo gripper that rotates is the better answer. Ask for the pattern software with the quote: a line that needs an engineer to reprogram every SKU change is not the same purchase as one where the operator picks a pattern from a screen.
Wat u ons moet sturen
A photo of the pallet as it is stacked today, the case weight and dimensions, cases per minute, the infeed height, and the plant's voltage. With those five we return a cell layout, the arm model, the gripper concept and a lead time. Standard palletizing arms ship in 15–40 days depending on payload class.
Questions we get asked
Welk laadvermogen moet ik kiezen als mijn koffers 20 kg wegen?
Tel de grijper en een marge van 15-20%: 20 kg koffer plus een vacuümgereedschap van 25 kg komt in de buurt van de klasse van 50-60 kg, dus een arm van 30 kg is meestal te klein en een arm van 165 kg comfortabel.
Kan één robot twee productielijnen palletiseren?
Ja, als de lijnen binnen bereik zijn en de cyclustijd het reizen toelaat. Twee invoerbanden in één cel zijn gebruikelijk; de beperking is dat de patroonsoftware beide lijnen in de rij zet zonder ook maar te verhongeren.
Heb ik een hek nodig?
Een vierassige palletiseerarm op snelheid loopt normaal gesproken achter een licht hekwerk of een veiligheidsscanner. Cobot-gebaseerd palletiseren bestaat, maar is beperkt tot de onderkant van het gewichtsbereik.
Machines this applies to
- 30 kg snelle palletiseerrobotTR1030B-185 · 15 dagen
- Palletiseerrobot van 165 kg, bereik van 3.000 mmTR10165B-310 · 20 dagen
- 800 kg zware palletiseerrobotTR10800B-300 · 40 dagen
Vraag een ingenieur naar uw geval
Keep reading
- Welke documenten worden met een machine meegeleverd (en waar moet u om vragen voordat u tekent)Handleiding, tekeningen, I/O-lijst, reserveonderdelenlijst, FAT-rapport, paklijst. Als u er één mist, verandert de inbedrijfstelling in een maand vol e-mails.
- Glazen gevelreinigingsrobots: wat een gebouw eigenlijk te bieden heeftDe robot is het kleine deel van de beslissing. Ankers, water, daktoegang, windlimieten en het contract met de schoonmaakploeg bepalen of het ooit gebruikt wordt.
- Selectie van het exoskelet: passief of aangedreven, en welk lichaamsdeel daadwerkelijk pijn doetPassieve eenheden ontlenen energie aan de houding; aangedreven eenheden voegen koppel toe. De juiste keuze hangt af van de taakduur, de belasting en of de werknemer loopt of staat.