Bagaimana untuk menentukan robot palletizing dalam empat nombor
Saiz palet, berat kotak, ketinggian tindanan dan kotak seminit menentukan lengan. Segala-galanya — gripper, keselamatan, perisian — mengikuti daripada empat itu.
Start with the pallet, not the robot
A palletizing arm has to reach the far corner of the tallest stack, not the middle of a conveyor. Measure the pallet footprint (1200×1000 and 1200×800 mm cover most of Europe; 1219×1016 mm is the US GMA size), the load height including the pallet itself, and the height of the infeed conveyor. The arm's working envelope must cover the worst-case corner at full stack height — that corner is what sets the reach, not the near side.
Payload is the case plus the gripper
Take the heaviest case, add the gripper (a vacuum tool for cartons is usually 15–40 kg, a mechanical clamp for bags more), add 15–20 % for acceleration and off-centre loads. Our four-axis palletizing line covers 30 kg to 800 kg: the TR1030B-185 handles 30 kg at 1,850 mm, the TR10165B-310 covers 165 kg at 3,100 mm, and the TR10800B-300 goes to 800 kg. A mid-size case line usually lands on the 165 kg class once the gripper and margin are counted — buyers regularly under-specify this by one size.
Cycle time decides the axis count
Four-axis arms are faster and cheaper for floor-level palletizing because they do not need to reorient the wrist. If the pattern needs the case rotated on every pick — mixed SKU pallets, labels facing out — a six-axis arm or a servo gripper that rotates is the better answer. Ask for the pattern software with the quote: a line that needs an engineer to reprogram every SKU change is not the same purchase as one where the operator picks a pattern from a screen.
Apa yang hendak dihantar kepada kami
A photo of the pallet as it is stacked today, the case weight and dimensions, cases per minute, the infeed height, and the plant's voltage. With those five we return a cell layout, the arm model, the gripper concept and a lead time. Standard palletizing arms ship in 15–40 days depending on payload class.
Questions we get asked
Apakah muatan yang perlu saya pilih jika sarung saya mempunyai berat 20 kg?
Kira penggenggam dan margin 15–20 %: 20 kg sarung ditambah alat vakum 25 kg mendarat hampir dengan kelas 50–60 kg, jadi lengan 30 kg biasanya terlalu kecil dan lengan 165 kg adalah selesa.
Bolehkah satu robot memaletkan dua barisan pengeluaran?
Ya jika talian berada dalam jangkauan dan masa kitaran membolehkan perjalanan. Dua penghantar suapan ke dalam satu sel adalah perkara biasa; kekangan adalah perisian corak beratur kedua-dua baris tanpa kelaparan sama ada.
Adakah saya memerlukan pagar?
Lengan palet empat paksi pada kelajuan biasanya berjalan di belakang pagar ringan atau pengimbas keselamatan. Palletizing berasaskan Cobot wujud tetapi terhad kepada hujung rendah julat berat.
Machines this applies to
- Robot Pelet Kelajuan Tinggi 30 kgTR1030B-185 · 15 hari
- Robot Palletizing 165 kg, Jangkauan 3,000 mmTR10165B-310 · 20 hari
- Robot Pallet Tugas Berat 800 kgTR10800B-300 · 40 hari
Tanya jurutera tentang kes anda
Keep reading
- Dokumen yang dihantar bersama mesin (dan perkara yang perlu diminta sebelum anda menandatangani)Manual, lukisan, senarai I/O, senarai alat ganti, laporan FAT, senarai pembungkusan. Ketiadaan salah satu daripada ini bertukar pentauliahan kepada sebulan e-mel.
- Robot pembersihan fasad kaca: apa yang sebenarnya perlu disediakan oleh bangunanRobot adalah sebahagian kecil daripada keputusan. Sauh, air, akses bumbung, had angin dan kontrak dengan krew pembersihan memutuskan sama ada ia akan digunakan.
- Pemilihan eksoskeleton: pasif atau berkuasa, dan bahagian badan mana yang sebenarnya sakitUnit pasif meminjam tenaga daripada postur; unit berkuasa menambah tork. Pilihan yang tepat bergantung pada tempoh tugas, beban, dan sama ada pekerja berjalan atau berdiri.