
สายการผลิตผ้าเป่าแบบละลายน้ำที่มีไฟฟ้าสถิต
TRW1600-MBM คือระบบอัตโนมัติสำหรับการบรรจุ/การบรรจุ ข้อมูลจำเพาะที่สำคัญ: กำลังการผลิตน้ำบริสุทธิ์ 4 T/H; ความยาวของอุโมงค์อบแห้ง 15M; อุณหภูมิเตาอบสูงถึง 140°C ระยะเวลาดำเนินการคือ 28 วัน ราคาจะถูกเสนอตามการกำหนดค่า การรับรอง: เอกสาร CE ตามคำขอ
- แบบอย่าง
- TRW1600-MBM
- กำลังการผลิตน้ำบริสุทธิ์
- 4T/ชม
- ความยาวของอุโมงค์อบแห้ง
- 15M
- อุณหภูมิเตาอบ
- up to 140℃
- พลังงานความร้อน
- ไฟสามเฟส 380V
- ควบคุมแหล่งจ่ายไฟ
- เฟสเดียว 220V
แพลตฟอร์มนี้มีไว้เพื่ออะไร
*กำลังการผลิตน้ำบริสุทธิ์: 4T/H *ความยาวของอุโมงค์อบแห้ง: 15 เมตร * อุณหภูมิเตาอบ: สูงถึง 140°C * พลังงานความร้อน: 3 เฟส 380V * แหล่งจ่ายไฟควบคุม: 220V เฟสเดียว * ความเร็วเชิงกล: 5-20 ม./นาที * กำลังการผลิตติดตั้ง: 400KW
เงื่อนไขทางการค้า
| ใบเสนอราคา | ราคาต่อการกำหนดค่า — ตอบกลับภายใน 48 ชั่วโมง |
|---|---|
| เวลานำ | 28 วัน |
| ขั้นต่ำ | 1 ยูนิต |
| ต้นทาง | จีน |
| พอร์ตของการโหลด | เซินเจิ้นประเทศจีน |
| Incoterm | FOB เซินเจิ้น / CIF ตามคำขอ |
| การชำระเงิน | เงินมัดจำ 30%, 70% ก่อนจัดส่ง |
| การรับประกัน | มาตรฐาน 24 เดือน สามารถเลือกได้ 36 เดือน |
รายละเอียดสินค้า
บันทึกการใช้งาน แบบก่อสร้าง และวิดีโอจากไฟล์ทางวิศวกรรม TROY — เอกสารชุดเดียวกันกับใบเสนอราคา
Electrostatic water resident melt blown fabric production line(TRW1600-MBM)

The difference between the water-electret melt blown cloth technology and the melt blown cloth manufactured by the traditional process is: the traditional melt blown cloth uses corona electret, which exhibits obvious stability and comprehensive benefits; while the water electret melt blown cloth The prepared pure water is delivered to the nozzle through the high-pressure water pump, and the melt blown cloth is sprayed by the fan nozzle, and the two rubbing to generate static electricity; the water electret melt blown cloth is saturated with static electricity and the static electret time is long !

First. Introduction of electret
Electret หมายถึงวัสดุอิเล็กทริกที่มีระยะยาว ฟังก์ชั่นการจัดเก็บค่าใช้จ่าย ค่าใช้จ่ายที่เก็บไว้อาจเป็นค่าใช้จ่ายจริงแบบขั้วเดียว ฉีดจากภายนอกหรือประจุไดโพลที่เกิดจากการปฐมนิเทศอย่างเป็นระเบียบ ของไดโพลในขั้วอิเล็กทริก หรือค่าธรรมเนียมทั้งสองประเภทมีอยู่พร้อมกัน เวลา.
ที่สอง. คืออะไร น้ำบริสุทธิ์พร้อมอิเล็กเตรตน้ำ?
การใช้อุปกรณ์น้ำอิเล็กเตรตน้ำบริสุทธิ์พิเศษ การกรองแบบอัลตราฟิลเตรชัน, รีเวอร์สออสโมซิส, EDI และระบบแลกเปลี่ยนไอออนนิวเคลียร์ ผลิตน้ำบริสุทธิ์พิเศษที่ตรงตามความต้องการ และน้ำเสียที่เกิดขึ้นใน กระบวนการผลิตจะถูกรีไซเคิลและนำกลับมาใช้ใหม่ผ่านการบำบัดของ ระบบเมมเบรน
ประการที่สาม หลักการของผ้าเป่าด้วยอิเล็กเตรตน้ำ
The corona electret was commonly used before. After the microfiber substrate is collected, it can be subjected to corona treatment to make it an electret. The water electret melt blown cloth is a high-pressure water pump to deliver the prepared pure water to the nozzle, and the ultra-pure water is sprayed to the base cloth with special water electret master batch, and static electricity is generated by the friction between the water and the cloth surface to achieve the electret effect. The performance of the water electret melt blown fabric is that the amount of static electricity is saturated, and the static electret time is long.

Fourth, water electrets melt blown fabric
Water electret technology is still relatively rare in the market, and it is somewhat mysterious. Let me briefly introduce it. First of all, the water electret technology can make the melt blown cloth achieve low resistance (about 3-40% resistance reduction), high efficiency (oil up to 99.97), no attenuation (up to more than 2 years); in other words, it reduces air resistance In the case of this, it can increase the filtration efficiency.
ดังนั้น โดยทั่วไป อิเล็กเตรตน้ำเป็นผลิตภัณฑ์ในอุดมคติที่จะทดแทนอิเล็กเตรตโคโรนา
ละลาย ข้อมูลจำเพาะของสายการผลิตอิเล็กเทรตน้ำเป่า (the ลูกค้าสามารถแก้ไขได้)
Equipment composition; water retention, drying, collection and cutting

specification content | Water electret production line |
ขนาด | 20000×2500×1900mm(L×W×H) |
Studio size | 12000×1800×100mm (L×W×H) |
Segment type | Box body segmented assembly (four-stage assembly) |
Way of working | ผ้าเป่าที่ละลายจะถูกส่งจากปลายป้อนอาหารด้านซ้ายผ่าน การบำบัดน้ำด้วยไฟฟ้าเข้าไปในช่องทำความร้อนเพื่อให้ความร้อนแล้ว ส่วนล่างถูกลำเลียงจากปลายระบายด้านขวาแล้วผ้าก็อยู่ ตัดแล้วตัด |
Door opening method | ช่องทางเข้าและทางออกพร้อมแผงเบี่ยงลม (ปรับได้) 30-50มม |
Box shell | ทำจากแผ่นเหล็กรีดเย็น Q235 หนา 1.5 มม. ซึ่งก็คือ เชื่อมและตอกหมุดหลังการกำจัดสนิมและการป้องกันสนิม พื้นผิวนั้น พ่นด้วยสีอะมิโนแบบแห้งเองจะได้สีขาวขุ่น |
Shell skeleton | เหล็กช่อง Q235 เหล็กฉาก และเหล็กหน้าตัดอื่นๆ ได้แก่ เชื่อมเป็นรูปทรงหลังการกำจัดสนิมและการป้องกันสนิม: ท่อสี่เหลี่ยม 10#, 4# หลอดสี่เหลี่ยม |
Furnace | Connected with 1.2mm thick sus304 stainless steel plate (temperature resistance 500℃) |
Chassis | ท่อเหล็กสี่เหลี่ยมมุมถูกเชื่อมและขึ้นรูปหลังจากเกิดสนิม การกำจัดและการป้องกันสนิม |
Adjust the foot cup | ถ้วยวางเท้าสำหรับงานหนักติดตั้งไว้ที่ด้านล่างของอุโมงค์ทำให้แห้ง เพื่อการปรับความสูงของอุปกรณ์ได้ง่าย |
แหล่งจ่ายไฟ | 3N+PE 380V 50Hz |
Temperature control record | Fuji Digital Display |
speed control | High-quality inverter |
Temperature control display control | Solid state relay controls temperature |
Temperature control monitoring | Alarm module, 8 groups of PT100 probes |
Operating temperature range | 0~150℃ |
Heating rate | ≥10℃/นาที (เมื่อ เตาเต็ม) |
temperature | Uniformity≤±5℃ |
Electric heating power | Heating power 150KW |
Circulation fan | 4kw 12 sets |
Chain traction power | 3KW 1 set |
transfer speed | Speed ratio: 1;10SB |
Product download time | Inverter adjustable 1min up to 26 meters |
Total furnace power | 201 kw |
Hot air circulation method | จ่ายอากาศ จากด้านบนของสตูดิโอ ให้อากาศกลับจากด้านล่าง |
Electric heater position | เครื่องทำความร้อน แท่งตั้งอยู่ในกล่องหมุนเวียนอากาศของอุโมงค์อบแห้ง |
electric heater | ดาว การเชื่อมต่อ 20V, 50Hz, เครื่องทำความร้อนไฟฟ้าที่ปิดผนึกอย่างเต็มที่พื้นผิวรูปตัวยูโหลดต่ำ หลอด อุณหภูมิพื้นผิวต่ำกว่า 380°C มีข้อดีคือ ความปลอดภัย ทนความร้อน ฯลฯ หนึ่งปี การรับประกัน |
Insulation treatment | ที่ ความต้านทานของฉนวนระหว่างส่วนนำไฟฟ้าของท่อความร้อนกับทั้งหมด ชิ้นส่วนที่ไม่นำไฟฟ้าคือ ≥10MΩ; ทนต่อแรงดันไฟฟ้า 1500V ไม่พัง การรั่วไหล การต่อสายดิน และข้อผิดพลาดอื่นๆ ภายใน 1 นาที |
Insulation material layout | The box body is insulated with high-density high-quality silicic acid cotton, with a temperature resistance above 800℃; the thickness of the insulation layer is 150mm, the heat transfer coefficient of the insulation material is 0.06Kcal/mh℃; the surface temperature is not more than 10℃ at normal temperature |
Exhaust device location | 4 moisture vents |
Traction method | เกียร์ ตัวลดขับเคลื่อนเฟืองโซ่ตาข่ายผ่านตัวลดกังหัน ที่ มอเตอร์แปลงความถี่ขับเคลื่อนเฟืองสายพานตาข่ายเพื่อขับเคลื่อน |
transmission shaft | การส่งผ่าน เพลาดับและนิรภัยเหล็ก 45 #; เส้นผ่านศูนย์กลาง 50 มม |
Conveyor belt | Teflon customization |
Belt deviation | Adopt 2 groups of corrector |
Control cabinet | Use independent control cabinet |
Emergency stop control | สอง ปุ่มหยุดฉุกเฉินถูกตั้งค่าไว้ที่อุโมงค์อบแห้งเพื่อรับทราบเหตุฉุกเฉิน หยุดการทำงานของอุปกรณ์ในกรณีที่เกิดอุบัติเหตุ |
safety protection | Over-temperature alarm system: when there is an abnormal change in the temperature in the furnace, it will give an audible and visual alarm and automatically cut off the power; motor and heating interlocking control: that is, the fan is heated before the heater is burned to prevent the heater from burning out and causing accidents |
ส่วนประกอบหลักเช่น อุปกรณ์และเครื่องใช้ไฟฟ้า

เลขที่. | ชื่อ | แบบอย่าง | |
1 | breaker | NSD-400 350A | |
2 | Thyristor | YTR series | |
3 | Temperature controller (master control) | PXR9 | |
4 | Contactor | LC1-D series | |
5 | thermal relay | LRD series | |
6 | Thermostat (alarm) | AI50IL2S4 | |
7 | Time Relay | CTDV-N1 6M/6M | |
8 | Intermediate relay | MY4N series | |
9 | sensor | Pt100 type probe | |
10 | Heater | 304 stainless steel heating rod, wound heat sink, surface low load U-W type | |
11 | Temperature resistant motor | 4KW | |
12 | Centrifugal wind wheel | DF type multi-wing low noise fan | |
13 | Shell sheet | 1.5mm/Q235 cold rolled steel plate | |
14 | Liner sheet | 1.2mm/sus304 stainless steel plate | |
15 | Incoming cable | สายไฟจาก ตู้จ่ายไฟของโรงงานไปยังกล่องควบคุมไฟฟ้าของ ตัวกล่องจะต้องจัดเตรียมโดยผู้ซื้อ (สายไฟของอุปกรณ์และ ตู้จ่ายไฟจะต้องจัดเตรียมโดยซัพพลายเออร์) | |
16 | colour | อุโมงค์อบแห้งทั้งหมดคือ สีขาวขุ่น (ต้องระบุ) |
ข้อมูลทางเทคนิคเต็มรูปแบบ
| แบบอย่าง | TRW1600-MBM |
|---|---|
| กำลังการผลิตน้ำบริสุทธิ์ | 4T/ชม |
| ความยาวของอุโมงค์อบแห้ง | 15M |
| อุณหภูมิเตาอบ | up to 140℃ |
| พลังงานความร้อน | ไฟสามเฟส 380V |
| ควบคุมแหล่งจ่ายไฟ | เฟสเดียว 220V |
| ความเร็วทางกล | 5-20m/min |
| กำลังการผลิตติดตั้ง | 400KW |
| พลัง | 400 kW |
| แรงดันไฟฟ้า | 380 V |
| หมวดหมู่ | อุปกรณ์อัตโนมัติ |
| เวลานำ | 28 วัน |
ค่าเป็นค่าเล็กน้อยที่ 20 °C ดาวน์โหลดเอกสารข้อมูลสำหรับโมเดล CAD กราฟแรงบิด และแมป I/O ของตัวควบคุม
มันวิ่งไปไหน.
กำหนดขนาดและควบคุมการใช้งานโดยวิศวกร TROY
กำหนดขนาดและควบคุมการใช้งานโดยวิศวกร TROY
กำหนดขนาดและควบคุมการใช้งานโดยวิศวกร TROY
กำหนดขนาดและควบคุมการใช้งานโดยวิศวกร TROY
คำถามของผู้ซื้อ
ข้อกำหนดที่สำคัญคืออะไร?
รุ่น: TRW1600-MBM กำลังการผลิตน้ำบริสุทธิ์: 4T/H ความยาวของอุโมงค์อบแห้ง: 15M
ระยะเวลารอคอยคืออะไร?
28 วันสำหรับการกำหนดค่ามาตรฐาน ยืนยันตามใบเสนอราคา
สามารถปรับแต่งได้หรือไม่?
ใช่ — สามารถปรับตัวเลือก OEM/ODM แรงดันไฟฟ้า เครื่องมือ และการสร้างแบรนด์ได้ ส่งใบสมัครและผลลัพธ์เป้าหมายสำหรับข้อเสนอ
รับข้อเสนอราคาสำหรับ TRW1600-MBM
รวมส่วนอัตราเป้าหมายและพอร์ตปลายทาง วิศวกร ไม่ใช่แชทบอท ตอบกลับภายใน 48 ชั่วโมง
หมวดเดียวกัน
เครื่องบรรจุครีมสี่สี
ระบบป้อนสกรูอัตโนมัติอเนกประสงค์และโมดูลขันแน่น
เครื่องทำซาลาเปาอัตโนมัติ TRB-140
รีวิวโดย TROY วิศวกรรม ·. ข้อมูลจำเพาะจะได้รับการตรวจสอบอีกครั้งกับเอกสารข้อมูลของซัพพลายเออร์ในทุกใบเสนอราคา