
静電気水常駐メルトブローン生地生産ライン
TRW1600-MBMは、包装・充填の自動化システムです。主な仕様: 純水生産能力 4 T/H。乾燥トンネルの長さ15M。オーブン温度は140℃まで。リードタイムは28日です。価格は構成ごとに見積もられます。認証: ご要望に応じて CE ドキュメントをご提供します。
- モデル
- TRW1600-MBM
- 純水製造能力
- 4T/H
- 乾燥トンネルの長さ
- 15M
- オーブン温度
- up to 140℃
- 火力
- 三相380V
- 制御電源
- 単相220V
このプラットフォームの目的
*純水生産能力:4T/H *乾燥トンネルの長さ:15M *オーブン温度:140℃まで *加熱電源:三相380V *制御電源:単相220V *機械速度:5-20m/min *設備容量:400KW
商業条件
| 引用 | 構成ごとの価格 - 48 時間以内にご返信ください |
|---|---|
| リードタイム | 28日 |
| MOQ | 1台 |
| 起源 | 中国 |
| 積地港 | 深セン、中国 |
| インコタームズ | FOB 深セン / CIF (ご要望に応じて) |
| 支払い | 30% のデポジット、出荷前に 70% |
| 保証 | 標準は 24 か月、オプションは 36 か月 |
製品詳細
TROY エンジニアリング ファイルからのアプリケーション ノート、構造図、およびビデオ — 見積書に同梱される同じ文書。
Electrostatic water resident melt blown fabric production line(TRW1600-MBM)

The difference between the water-electret melt blown cloth technology and the melt blown cloth manufactured by the traditional process is: the traditional melt blown cloth uses corona electret, which exhibits obvious stability and comprehensive benefits; while the water electret melt blown cloth The prepared pure water is delivered to the nozzle through the high-pressure water pump, and the melt blown cloth is sprayed by the fan nozzle, and the two rubbing to generate static electricity; the water electret melt blown cloth is saturated with static electricity and the static electret time is long !

First. Introduction of electret
エレクトレットとは、長期耐久性を有する誘電体材料を指します。 電荷蓄積機能。蓄積された電荷は単極実電荷になる可能性があります 外部から注入されたもの、または秩序ある配向によって形成された双極子電荷 極性誘電体における双極子の数。または、両方のタイプの料金が同時に存在します time.
2番。とは何ですか 水エレクトレットを含む純水?
水エレクトレット超純水装置用途 限外濾過、逆浸透、EDI、および核イオン交換システム ニーズに合わせた超純水を生産します。そして発生する廃水は、 生産プロセスは、処理を通じてリサイクルおよび再利用されます。 膜システム。
第三に、 水エレクトレットの原理メルトブローン生地
The corona electret was commonly used before. After the microfiber substrate is collected, it can be subjected to corona treatment to make it an electret. The water electret melt blown cloth is a high-pressure water pump to deliver the prepared pure water to the nozzle, and the ultra-pure water is sprayed to the base cloth with special water electret master batch, and static electricity is generated by the friction between the water and the cloth surface to achieve the electret effect. The performance of the water electret melt blown fabric is that the amount of static electricity is saturated, and the static electret time is long.

Fourth, water electrets melt blown fabric
Water electret technology is still relatively rare in the market, and it is somewhat mysterious. Let me briefly introduce it. First of all, the water electret technology can make the melt blown cloth achieve low resistance (about 3-40% resistance reduction), high efficiency (oil up to 99.97), no attenuation (up to more than 2 years); in other words, it reduces air resistance In the case of this, it can increase the filtration efficiency.
それで 一般に、水エレクトレットはコロナエレクトレットに代わる理想的な製品です。
メルト 吹き水エレクトレット製造ライン仕様( 生産ラインはお客様にて変更可能)
Equipment composition; water retention, drying, collection and cutting

specification content | Water electret production line |
寸法 | 20000×2500×1900mm(L×W×H) |
Studio size | 12000×1800×100mm (L×W×H) |
Segment type | Box body segmented assembly (four-stage assembly) |
Way of working | メルトブローン生地は左側の供給端から送られ、 水エレクトレット処理を加熱チャンネルに導入して加熱し、その後、 右排出端から下部が搬送され、布が搬送されます。 切って切って |
Door opening method | ウィンドディフレクター(調整可能)クリアランスを備えた入口と出口 30~50mm |
Box shell | 厚さ1.5mmのQ235冷間圧延鋼板で作られています。 錆取り、防錆処理を行った後、溶接、リベット止めを行っております。表面は アミノ系自己乾燥性塗料をスプレー、色は乳白色です。 |
Shell skeleton | Q235チャンネル鋼、山形鋼、その他の形鋼は、 除錆、防錆処理後溶接成形:10#角管、4# 角管 |
Furnace | Connected with 1.2mm thick sus304 stainless steel plate (temperature resistance 500℃) |
Chassis | アングル鋼角パイプを錆びさせてから溶接成形します。 除去と防錆処理 |
Adjust the foot cup | 乾燥トンネルの底には頑丈なフットカップが設置されています 装置の高さを簡単に調整できるようにする |
電源 | 3N+PE 380V 50Hz |
Temperature control record | Fuji Digital Display |
speed control | High-quality inverter |
Temperature control display control | Solid state relay controls temperature |
Temperature control monitoring | Alarm module, 8 groups of PT100 probes |
Operating temperature range | 0~150℃ |
Heating rate | ≧10℃/min( 炉がいっぱいです) |
temperature | Uniformity≤±5℃ |
Electric heating power | Heating power 150KW |
Circulation fan | 4kw 12 sets |
Chain traction power | 3KW 1 set |
transfer speed | Speed ratio: 1;10SB |
Product download time | Inverter adjustable 1min up to 26 meters |
Total furnace power | 201 kw |
Hot air circulation method | 供給エア スタジオの上から、下から空気を戻す |
Electric heater position | 暖房 ロッドは乾燥トンネルの空気循環ボックスにセットされます |
electric heater | スター 接続20V、50Hz、U字面低負荷完全密閉電熱 チューブ、表面温度は380℃未満、安全性、耐熱性などの利点があり、1年間 保証 |
Insulation treatment | の 加熱管の導電部分とすべての間の絶縁抵抗 非導電性部品は ≥10MΩ。耐電圧1500V、無故障、 漏電、地絡、その他の故障を1分間で解決 |
Insulation material layout | The box body is insulated with high-density high-quality silicic acid cotton, with a temperature resistance above 800℃; the thickness of the insulation layer is 150mm, the heat transfer coefficient of the insulation material is 0.06Kcal/mh℃; the surface temperature is not more than 10℃ at normal temperature |
Exhaust device location | 4 moisture vents |
Traction method | ギア 減速機はタービン減速機を介してメッシュベルトスプロケットを駆動します。の 周波数変換モーターがメッシュベルトのスプロケットを駆動して駆動します |
transmission shaft | 送信 シャフトは焼き入れおよび焼き戻しされた 45# スチールです。直径50mm |
Conveyor belt | Teflon customization |
Belt deviation | Adopt 2 groups of corrector |
Control cabinet | Use independent control cabinet |
Emergency stop control | 2 乾燥トンネルには緊急停止ボタンが設置されており、緊急事態を実現します。 事故時の設備停止 |
safety protection | Over-temperature alarm system: when there is an abnormal change in the temperature in the furnace, it will give an audible and visual alarm and automatically cut off the power; motor and heating interlocking control: that is, the fan is heated before the heater is burned to prevent the heater from burning out and causing accidents |
主な成分としては、 設備や電化製品

いいえ。 | 名前 | モデル | |
1 | breaker | NSD-400 350A | |
2 | Thyristor | YTR series | |
3 | Temperature controller (master control) | PXR9 | |
4 | Contactor | LC1-D series | |
5 | thermal relay | LRD series | |
6 | Thermostat (alarm) | AI50IL2S4 | |
7 | Time Relay | CTDV-N1 6M/6M | |
8 | Intermediate relay | MY4N series | |
9 | sensor | Pt100 type probe | |
10 | Heater | 304 stainless steel heating rod, wound heat sink, surface low load U-W type | |
11 | Temperature resistant motor | 4KW | |
12 | Centrifugal wind wheel | DF type multi-wing low noise fan | |
13 | Shell sheet | 1.5mm/Q235 cold rolled steel plate | |
14 | Liner sheet | 1.2mm/sus304 stainless steel plate | |
15 | Incoming cable | からの電源ラインは、 ワークショップの配電キャビネットから電気制御ボックスまで ボックス本体は購入者が用意するものとします(機器の配線と 配電キャビネットはサプライヤーが提供するものとします) | |
16 | colour | 乾燥トンネル全体は、 乳白色(未定) |
完全な技術データ
| モデル | TRW1600-MBM |
|---|---|
| 純水製造能力 | 4T/H |
| 乾燥トンネルの長さ | 15M |
| オーブン温度 | up to 140℃ |
| 火力 | 三相380V |
| 制御電源 | 単相220V |
| 機械速度 | 5-20m/min |
| 設置容量 | 400KW |
| 力 | 400 kW |
| 電圧 | 380 V |
| カテゴリ | 自動化装置 |
| リードタイム | 28日 |
値は 20 °C における公称値です。 CAD モデル、トルク曲線、コントローラー I/O マップのデータシートをダウンロードしてください。
どこで実行されるか
TROY エンジニアによってサイズ調整と委託が行われました。
TROY エンジニアによってサイズ調整と委託が行われました。
TROY エンジニアによってサイズ調整と委託が行われました。
TROY エンジニアによってサイズ調整と委託が行われました。
購入者の質問
主な仕様は何ですか?
型式:TRW1600-MBM、純水製造能力:4T/H、乾燥トンネル長さ:15M。
リードタイムはどれくらいですか?
標準構成の場合は 28 日。引用時に確認されました。
カスタマイズできますか?
はい - OEM/ODM オプション、電圧、ツール、ブランドを適応させることができます。アプリケーションと提案のターゲット出力を送信します。
TRW1600-MBM の価格提案を取得する
パート、ターゲット レート、宛先ポートを含めます。チャットボットではなくエンジニアが 48 時間以内に返信します。
同じカテゴリ
TROY エンジニアリングによるレビュー ·。仕様は見積ごとにサプライヤーのデータシートと照合して再チェックされます。