
정전기수 상주 멜트블로운 직물 생산 라인
TRW1600-MBM은 포장/충전 자동화 시스템입니다. 주요 사양: 순수 생산 능력 4 T/H; 건조 터널 길이 15M; 오븐 온도는 최대 140℃입니다. 리드타임은 28일이다. 가격은 구성별로 제시됩니다. 인증: 요청 시 CE 문서.
- 모델
- TRW1600-MBM
- 순수 생산능력
- 4T/H
- 건조 터널의 길이
- 15M
- 오븐 온도
- up to 140℃
- 난방력
- 삼상 380V
- 제어 전원
- 단상 220V
이 플랫폼의 용도
*순수 생산 능력: 4T/H *건조 터널 길이: 15M * 오븐 온도: 최대 140℃ * 가열 전력: 3상 380V * 제어 전원 공급 장치: 단상 220V * 기계적 속도: 5-20m/min * 설치 용량: 400KW
상업적 용어
| 인용 | 구성당 가격 책정 — 48시간 이내에 답변 |
|---|---|
| 리드타임 | 28일 |
| MOQ | 1개 단위 |
| 기원 | 중국 |
| 선적항 | 중국 선전 |
| 인코텀즈 | 요청 시 FOB 심천/CIF |
| 지불 | 보증금 30%, 배송 전 70% |
| 보증 | 24개월은 기본, 36개월은 선택 가능 |
제품 세부정보
TROY 엔지니어링 파일의 애플리케이션 노트, 시공 도면 및 비디오 — 견적과 함께 제공되는 동일한 문서입니다.
Electrostatic water resident melt blown fabric production line(TRW1600-MBM)

The difference between the water-electret melt blown cloth technology and the melt blown cloth manufactured by the traditional process is: the traditional melt blown cloth uses corona electret, which exhibits obvious stability and comprehensive benefits; while the water electret melt blown cloth The prepared pure water is delivered to the nozzle through the high-pressure water pump, and the melt blown cloth is sprayed by the fan nozzle, and the two rubbing to generate static electricity; the water electret melt blown cloth is saturated with static electricity and the static electret time is long !

First. Introduction of electret
일렉트릿(Electret)은 장기간 지속되는 유전체 재료를 의미합니다. 충전 저장 기능. 저장된 전하는 단극 실제 전하일 수 있습니다. 외부에서 주입되거나 규칙적인 방향으로 형성된 쌍극자 전하 극성 유전체의 쌍극자. 또는 두 가지 유형의 요금이 동시에 존재합니다. 시간.
두번째. 무엇입니까? 순수한 물과 물 일렉트렛?
물 일렉트릿 초순수 장비의 용도 한외여과, 역삼투, EDI 및 핵 이온 교환 시스템 요구에 맞는 초순수를 생산합니다. 그리고 발생된 폐수는 생산 과정은 처리를 통해 재활용 및 재사용됩니다. 멤브레인 시스템.
셋째, 물 일렉트릿 멜트블로운 직물의 원리
The corona electret was commonly used before. After the microfiber substrate is collected, it can be subjected to corona treatment to make it an electret. The water electret melt blown cloth is a high-pressure water pump to deliver the prepared pure water to the nozzle, and the ultra-pure water is sprayed to the base cloth with special water electret master batch, and static electricity is generated by the friction between the water and the cloth surface to achieve the electret effect. The performance of the water electret melt blown fabric is that the amount of static electricity is saturated, and the static electret time is long.

Fourth, water electrets melt blown fabric
Water electret technology is still relatively rare in the market, and it is somewhat mysterious. Let me briefly introduce it. First of all, the water electret technology can make the melt blown cloth achieve low resistance (about 3-40% resistance reduction), high efficiency (oil up to 99.97), no attenuation (up to more than 2 years); in other words, it reduces air resistance In the case of this, it can increase the filtration efficiency.
그래서 일반적으로 물 일렉트릿은 코로나 일렉트릿을 대체할 수 있는 이상적인 제품입니다.
녹다 불어진 물 일렉트릿 생산 라인 사양( 생산 라인은 고객에 의해 수정될 수 있습니다)
Equipment composition; water retention, drying, collection and cutting

specification content | Water electret production line |
치수 | 20000×2500×1900mm(L×W×H) |
Studio size | 12000×1800×100mm (L×W×H) |
Segment type | Box body segmented assembly (four-stage assembly) |
Way of working | 멜트블로운 천은 왼쪽 공급 끝에서 가열을 위해 가열 채널에 물 일렉트릿 처리를 한 다음 하부는 오른쪽 토출단에서 이송되고 천은 자르고 또 자르고 |
Door opening method | 윈드 디플렉터(조정 가능) 간격이 있는 흡입구 및 배출구 30-50mm |
Box shell | 1.5mm 두께의 Q235 냉간압연강판으로 제작되었습니다. 녹 제거 및 방청 처리 후 용접 및 리벳 고정. 표면은 아미노 자체 건조 페인트를 뿌렸으며 색상은 유백색입니다. |
Shell skeleton | Q235 채널강, 앵글강 및 기타 형강은 다음과 같습니다. 녹 제거 및 방청 처리 후 용접하여 형성: 10# 사각 튜브, 4# 사각 튜브 |
Furnace | Connected with 1.2mm thick sus304 stainless steel plate (temperature resistance 500℃) |
Chassis | 앵글 스틸 사각 파이프는 녹이 발생한 후에 용접되어 형성됩니다. 제거 및 방청 처리 |
Adjust the foot cup | 건조 터널 바닥에 튼튼한 발 컵이 설치되어 있습니다. 장비 높이를 쉽게 조절할 수 있도록 |
전원 공급 장치 | 3N+PE 380V 50Hz |
Temperature control record | Fuji Digital Display |
speed control | High-quality inverter |
Temperature control display control | Solid state relay controls temperature |
Temperature control monitoring | Alarm module, 8 groups of PT100 probes |
Operating temperature range | 0~150℃ |
Heating rate | ≥10℃/min(때 용광로가 가득 찼습니다) |
temperature | Uniformity≤±5℃ |
Electric heating power | Heating power 150KW |
Circulation fan | 4kw 12 sets |
Chain traction power | 3KW 1 set |
transfer speed | Speed ratio: 1;10SB |
Product download time | Inverter adjustable 1min up to 26 meters |
Total furnace power | 201 kw |
Hot air circulation method | 공급 공기 스튜디오 상단에서, 하단에서 공기를 반환합니다. |
Electric heater position | 난방 막대는 건조 터널의 공기 순환 상자에 설정됩니다. |
electric heater | 스타 연결 20V, 50Hz, U자형 표면 저부하 완전 밀봉 전기 가열 튜브, 표면 온도가 380 ℃보다 낮고 안전성, 내열성 등의 장점이 있으며 1 년 보증 |
Insulation treatment | 는 가열 튜브의 전도성 부분과 전체 사이의 절연 저항 비전도성 부품은 ≥10MΩ입니다. 내전압 1500V, 고장 없음, 누수, 접지 등의 고장을 1분 안에 해결 |
Insulation material layout | The box body is insulated with high-density high-quality silicic acid cotton, with a temperature resistance above 800℃; the thickness of the insulation layer is 150mm, the heat transfer coefficient of the insulation material is 0.06Kcal/mh℃; the surface temperature is not more than 10℃ at normal temperature |
Exhaust device location | 4 moisture vents |
Traction method | 기어 감속기는 터빈 감속기를 통해 메쉬 벨트 스프로킷을 구동합니다. 는 주파수 변환 모터는 메쉬 벨트 스프로킷을 구동하여 구동합니다. |
transmission shaft | 전송 샤프트는 담금질 및 템퍼링된 45# 강철입니다. 직경 50mm |
Conveyor belt | Teflon customization |
Belt deviation | Adopt 2 groups of corrector |
Control cabinet | Use independent control cabinet |
Emergency stop control | 2개 긴급 상황을 실현하기 위해 건조 터널에 비상 정지 버튼이 설치되어 있습니다. 사고 발생시 장비 정지 |
safety protection | Over-temperature alarm system: when there is an abnormal change in the temperature in the furnace, it will give an audible and visual alarm and automatically cut off the power; motor and heating interlocking control: that is, the fan is heated before the heater is burned to prevent the heater from burning out and causing accidents |
다음과 같은 주요 구성 요소 장비 및 전기 제품

아니요. | 이름 | 모델 | |
1 | breaker | NSD-400 350A | |
2 | Thyristor | YTR series | |
3 | Temperature controller (master control) | PXR9 | |
4 | Contactor | LC1-D series | |
5 | thermal relay | LRD series | |
6 | Thermostat (alarm) | AI50IL2S4 | |
7 | Time Relay | CTDV-N1 6M/6M | |
8 | Intermediate relay | MY4N series | |
9 | sensor | Pt100 type probe | |
10 | Heater | 304 stainless steel heating rod, wound heat sink, surface low load U-W type | |
11 | Temperature resistant motor | 4KW | |
12 | Centrifugal wind wheel | DF type multi-wing low noise fan | |
13 | Shell sheet | 1.5mm/Q235 cold rolled steel plate | |
14 | Liner sheet | 1.2mm/sus304 stainless steel plate | |
15 | Incoming cable | 전원 공급 라인 작업장의 전기 제어 상자에 대한 배전 캐비닛 상자 몸은 구매자에 의해 제공될 것입니다 (장비의 배선 및 배전 캐비닛은 공급자가 제공해야 함) | |
16 | colour | 전체 건조 터널은 다음과 같습니다. 유백색(미정) |
전체 기술 데이터
| 모델 | TRW1600-MBM |
|---|---|
| 순수 생산능력 | 4T/H |
| 건조 터널의 길이 | 15M |
| 오븐 온도 | up to 140℃ |
| 난방력 | 삼상 380V |
| 제어 전원 | 단상 220V |
| 기계적 속도 | 5-20m/min |
| 설치용량 | 400KW |
| 힘 | 400 kW |
| 전압 | 380 V |
| 범주 | 자동화 장비 |
| 리드타임 | 28일 |
값은 20°C에서의 공칭값입니다. CAD 모델, 토크 곡선 및 컨트롤러 I/O 맵에 대한 데이터시트를 다운로드하세요.
실행되는 곳
TROY 엔지니어가 크기를 조정하고 의뢰했습니다.
TROY 엔지니어가 크기를 조정하고 의뢰했습니다.
TROY 엔지니어가 크기를 조정하고 의뢰했습니다.
TROY 엔지니어가 크기를 조정하고 의뢰했습니다.
구매자 질문
주요 사양은 무엇입니까?
모델: TRW1600-MBM, 순수 생산 능력: 4T/H, 건조 터널 길이: 15M.
리드타임은 무엇입니까?
표준 구성의 경우 28일, 견적으로 확인되었습니다.
맞춤 설정할 수 있나요?
예 - OEM/ODM 옵션, 전압, 툴링 및 브랜딩을 조정할 수 있습니다. 제안서에 대한 응용 프로그램 및 대상 출력을 보냅니다.
TRW1600-MBM 가격 제안 받기
부품, 목표 속도 및 대상 포트를 포함합니다. 챗봇이 아닌 엔지니어가 48시간 이내에 답변합니다.
같은 카테고리
검토자: TROY 엔지니어링 ·. 사양은 견적이 나올 때마다 공급업체 데이터시트를 기준으로 다시 확인됩니다.