Chuyển đến nội dung
Kỹ sư bán hàng trực tuyến · 09:00–21:00 CST Bảo An, Thâm Quyến, Trung Quốc
+86 400 098 8557 Nói chuyện với một kỹ sư
Trang chủ/Các sản phẩm/Thiết bị tự động hóa/TR-SBB
TR-SBB Máy làm găng tay nitrile
Tài liệu CE theo yêu cầu
Thiết bị tự động hóa · TR-SBB

Máy làm găng tay nitrile

TR-SBB · Thời gian thực hiện 60 ngày

TR-SBB là một hệ thống tự động hóa để đóng gói / chiết rót. Thông số kỹ thuật chính: Sản phẩm chính Găng tay PVC/Latex/Vinyl. Thời gian thực hiện là 60 ngày; giá được trích dẫn cho mỗi cấu hình. Chứng chỉ: Tài liệu CE theo yêu cầu.

Người mẫu
TR-SBB
Sản phẩm chính
Găng tay PVC/Latex/Vinyl dành cho
Loại
Thiết bị tự động hóa
thời gian dẫn
60 ngày
Giá theo yêu cầuPriced per configuration · quotation within 48 hours · FOB Shanghai · MOQ 1 unit
Bao gồm tập tin CEFAT trước khi giao hàngPhụ tùng 7 nămTùy chọn bảo hành 3 năm
Đánh giá kỹ sư:gửi bản vẽ bộ phận và tỷ lệ mục tiêu - chúng tôi gửi lại ước tính chu kỳ và khái niệm vật cố định cùng với báo giá.

Nền tảng này dùng để làm gì

Dây chuyền sản xuất tự động găng tay nitrile sản xuất găng tay PVC/latex/vinyl dùng để kiểm tra và phẫu thuật, găng tay dùng một lần trong gia đình. Tiết kiệm năng lượng, tỷ lệ thất bại thấp. Tìm thông tin chi tiết về máy làm găng tay nitrile.

Bao bìđiềnDây chuyền lắp rápCuối dòng

Điều kiện thương mại

Trích dẫnĐịnh giá theo cấu hình - trả lời trong vòng 48 giờ
thời gian dẫn60 ngày
MOQ1 đơn vị
Nguồn gốcTrung Quốc
Cảng bốc hàngShanghai, China
IncotermFOB Shanghai / CIF on request
Sự chi trảĐặt cọc 30%, 70% trước khi giao hàng
Bảo hànhTiêu chuẩn 24 tháng, tùy chọn 36 tháng
Thiết bị tự động hóa · TR-SBB

Chi tiết sản phẩm

Ghi chú ứng dụng, bản vẽ xây dựng và video từ tệp kỹ thuật TROY - cùng một tài liệu được gửi cùng với báo giá.


AUTOMATIC GLOVE DIPPING LINE SPECIFICATION
1Type Of ChainChain is the life of the Gloves production line, every processes of the production line is drive by the chain,and connecting the entire process flow, different production lines using different drive chain, we use 100mm pitch chain relative to the various types of tracks, the main purpose is to reduce the wear and tear of the transmission process, noise and smooth travel. And use gravity to tension the system to make sure the chain is tight at all times.
2Frame material and technical requirementsStructural requirements of the main is solid combination of high-carbon steel : 12 # square steel, 12# U-Steel,The main frame of the beam structure use of high carbon steel type 10*6 square pipe and 12 # channel.The main track also uses high-strength, wear-resistant high-carbon steel materials: 5 # U-shaped steel, 12 # C steel and other supporting the production line as the main transmission track use.The overall frame after the completion of the protective process, first coated with a layer of anti-rust paint to prevent rust corrosion of steel, and then coated with a layer of smooth finish, one is to strengthen the protective effect of the second is to make the machine look beautiful, depending on the process used Temperature resistant at 150-200 degrees Celsius temperature paint (according to customer requirements use top coat).
3Thiết bị dẫn động chính và phụMain drive of various production lines is driven by25KW motor and flange helical gears. The motor should be 3C standard. Because this motor is not easy to be hot, it can work effectively for a long time. The combination of the flange helical gear drive makes the main drive more smooth. Auxiliary drive equipment: mold brushing system, coagulant circulation system, sulfide mixture (latex, nitrile rubber, etc.) mixing system, starch circulation system, heat transmission distribution system, angle rotationsystem and other auxiliary production processes.
4Thông số kỹ thuật, yêu cầu kỹ thuật, chức năng của bể keo tụ, bể nhựa:①: The structure of the coagulant tank and the latex tank is composed of a groove body formed by double layers of materials inside and outside, a coagulant groove, and an outer layer of the glue groove is made of ahigh-carbon steel plate. The strong steel plate is favorable for keeping the shape of the groove body not to be deformed and the structural combination relatively firm . The inner use of 3mm 304 stainless steel, stainless steel has a uniform effect of heat and corrosion, the heat effect is significantly conducive coagulant, latex in the tank thermostat effect.
②: Lớp lót bằng thép không gỉ 3 mmt 304, nhiệt chính đều và có tác dụng chống ăn mòn
Túi mật ngoài tấm thép carbon cao 4mmt, cấu trúc chính không bị biến dạng ổn định.
③: Coagulant tank, plastic tank with circulation mixing system, motor drive and stainless steel vane circulation pump composed of glue circulation system, the motor is not easy to hot long-term operation can be effective to the coagulant tank, plastic tank brought The stability of the cycle, and stainless steel leaf circulation pump anti-corrosion effect is good, easy to wear, will not give coagulant, glue caused by metal powder.
5Thông số kỹ thuật và chức năng của thiết bị làm sạch khuôn:
2Acid tanks, 2 Alkali tanks, 2 hot water tanks
①: Mold cleaning equipment which is a mould cleaning mechanism consists of pickling tank,alkaline cleaning tank, washing mould round brush and brush and a two heated water trough , these grooves use monolayer that made of 3mm sus304 stainless steel to heat directly tanks .However, round brush and transverse brush are made of engineering plastic board and nylon plate. The capacity of each groove makes in accordance with the requirements of the process.
②: Each groove of the system has each function,the pickling tank is to clean residue on the mold, but alkaline cleaning tank is to clean up and counteract acid water on the mold and then enter washing and cleaning mode to make cleanliness of mold achieve initial effect, and finally two hot water troughs soak in water and wash dust of mould and make mould cleaner.
③: Ống thép không gỉ SUS304 được sử dụng để làm cuộn dây gia nhiệt khi gia nhiệt, và cuộn dây được đặt trực tiếp dưới đáy bể để làm nóng chất lỏng làm sạch bằng cách tản nhiệt trên tường, để đạt được hiệu ứng nhiệt độ không đổi tốt nhất.
6Cấu tạo chức năng của bể lọc
3 leaching tanks +3 leaching tanks
①: Bể lọc là một khe hình vuông ổn nhiệt được ngăn cách bởi các tấm hai lớp. Sử dụng thép không gỉ 3 mm 304, có tác dụng tích tụ nhiệt và chống ăn mòn tốt.
②: Theo sự khác biệt của quy trình, bể lọc phải có dạng rãnh vuông. Vai trò chính của nó là giúp loại bỏ chất protein trong sản phẩm và tác dụng làm nóng trước.
③: Hầu hết các rãnh đôi của toàn bộ dây chuyền sản xuất đều được tích hợp sẵn cuộn dây gia nhiệt bằng ống thép không gỉ SUS304, nước trong lớp xen kẽ được làm nóng bằng thành cuộn, sau đó nhiệt độ của chất lỏng trong bể được kiểm soát bởi nhiệt độ nước.
7Cấu trúc và chức năng của các rãnh tinh bột①: Rãnh tinh bột là một bể có chức năng trộn một lớp và tuần hoàn, được làm bằng thép không gỉ SUS304 3 mm
②: Theo sự khác biệt của quy trình, bể chứa tinh bột, vai trò chính của nó là giúp bề mặt sản phẩm gắn bột riêng biệt để tạo thành thành phẩm sau khi tước không liên kết với nhau
③: Bể chứa tinh bột là ống cuộn được đặt dưới đáy bể để làm nóng trực tiếp
8Crimping,flanging and automatic mold unloading system①: Hệ thống uốn tóc được tạo thành từ nhiều bộ phận khác nhau và nguyên lý làm việc cơ học.
②: Và hệ thống gấp mép tương đối đơn giản. Chức năng của nó là hỗ trợ hệ thống hoạt động ban đầu của máy tước phôi. Nó tương tự như chức năng uốn và vật liệu của chúng là trục bàn chải tròn làm bằng nylon.
③: The most complex process is automatic ingot stripping system in the whole production equipment, according to the processes and products are different ,so the structures of ingot stripping are different, the form of contact with the product release clip, splint, roller,circular brush shaft and other high-pressure air of ingot stripping mold and so on, and the materials used are also varied.Its main function is to reduce the human input, high working efficiency ,increasing output and so on.
9Chemical Auxiliary Equipment①: Chemical process auxiliary equipment, mainly used for chemical grinding, blending, vulcanization and production added and so on,The chemical process is made of diaphragm pump, ball mill, sand mill, vulcanization mixing tank, storage tank, feeding tank, coagulant mixing tank, polymer mixing tank and powder tank.Different products in the production line using different chemical process auxiliary equipment for chemical production and use.
②: Ball mill and sand mill is mainly used to grind chemical granule material,grinding it into fine powder,Ball mill to carry ceramic ball mill tank,use of a ceramic tank to scrolling on ball mill to grind chemicals,The sand mill is the use of agitation grinding chemicals,According to the needs of different processes to support.
③: Vulcanization mixing tank, storage tank, polymer mixing tank, coagulant mixing tank, starch mixing tank, mixing tank and feeding tank are mainly used for mixing and adjusting the finished product directly to produce chemical materials. Rely on the mixing evenly chemical materials and prevent precipitation.according to the needs of different processes supporting.
④: Chemical auxiliary tank is mostly use double constant temperature tank,the inner of tank using 3 mm 304 stainless steel plate which has heat evenly and anti-corrosion effect,The outer tank use a high carbon steel plate of 4mm, High-strength steel plate structure to play a solid and not easily deformed effect.
⑤: Hệ thống trộn sử dụng động cơ kim cycloid và điều khiển biến tần, theo yêu cầu của quá trình hóa học để thay đổi tốc độ trộn, cánh khuấy làm bằng cánh khuấy trục vít inox TISCO 304.
10Oven insulation board specifications and technical parameters details:①: Oven is combination of insulation board formed to be several independent oven, according to the process requirements to be different oven size, and the function of the oven is to provide heat of the heat collection space and the product heating and drying, the working temperature by the different artwork there are 80 -110, 110-130, 130-150, 150-170 ℃
②: Lò có tác dụng cách nhiệt tốt và khả năng chịu nhiệt độ cao có thể chịu được nhiệt độ 250-300 độ C, mật độ bông cách nhiệt tầng lửng có độ rắn chắc rất tốt, giữa các tấm có độ khít tốt để tránh rò rỉ nhiệt, từ đó giảm thất thoát nhiệt
③: Vật liệu bên trong là tấm thép không gỉ 0,6mmSUS304, chức năng chính là chống ăn mòn và tăng cường độ bền của tấm bên trong.
Vật liệu tấm bên ngoài là tấm thép carbon cao 1,0mm, tăng cường toàn bộ độ dày của tấm cách nhiệt.
Bông cách nhiệt sandwich là bông đá dày 78 mm, mật độ 130 kg / m³, có thể đạt được hiệu quả cách nhiệt một cách hiệu quả.
11Oven thermal equipment and dehumidification exhaust system:①: Ovens main thermal equipment are electric rods, infrared and fluid (oil, steam, hot air) heat pipe, radiator.
Wind structure formed in the oven, the use of fan transmission distribution of heat while the moisture in the oven is discharged from the oven, the top of the oven every 10 meters has a 20mmX40mm Vapor evaporation gate hole to help deal with moisture, Keep the oven dry and reduce corrosion caused by moisture.
12Control box FunctionKhóa USB, người hướng dẫn có thể có cái nhìn rõ ràng về hoạt động và có thể tự động tính toán công suất, mức tiêu thụ và xuất báo cáo.
Safe alarm, malfunction diagnose
13Electrical control box brandElectrical control box
Air switch: South Korea-LS
Contactor:South Korea -LS
Electric relay: Japan - OMRON
Frequency control: Taiwan Delta
PLC computer programming integrated circuit control: Taiwan Delta
10.4 inch color touch screen controller: Taiwan Weinview
Switching power supply: Taiwan - Mean well
Cylinder: Taiwan -AIRTAC

nitrile gloves making machine

nitrile gloves making machine

nitrile condom making machine

nitrile gloves making machine

nitrile gloves making machine

nitrile balloon making machine

nitrile gloves making machine

nitrile gloves making machine accessories

nitrile gloves making machine accessories

nitrile gloves making machine

Thông số kỹ thuật

Dữ liệu kỹ thuật đầy đủ

Người mẫuTR-SBB
Sản phẩm chínhGăng tay PVC/Latex/Vinyl dành cho
LoạiThiết bị tự động hóa
thời gian dẫn60 ngày

Các giá trị danh nghĩa ở 20°C. Tải xuống bảng dữ liệu cho các mô hình cad, đường cong mô-men xoắn và bản đồ I/O của bộ điều khiển.

Ứng dụng

Nó chạy ở đâu

Bao bì

Được xác định kích thước và ủy quyền bởi các kỹ sư TROY.

điền

Được xác định kích thước và ủy quyền bởi các kỹ sư TROY.

Dây chuyền lắp ráp

Được xác định kích thước và ủy quyền bởi các kỹ sư TROY.

Cuối dòng

Được xác định kích thước và ủy quyền bởi các kỹ sư TROY.

Câu hỏi thường gặp

Câu hỏi của người mua

Thông số kỹ thuật chính của TR-SBB là gì?

Sản phẩm chính: Găng tay PVC/Latex/Vinyl dành cho. Một bảng dữ liệu đầy đủ có sẵn theo yêu cầu.

Thời gian thực hiện và MOQ cho TR-SBB là bao nhiêu?

Thời gian thực hiện là 60 ngày; MOQ là 1 đơn vị.

TR-SBB có giá như thế nào?

Giá được trích dẫn cho mỗi cấu hình, bao gồm cả dụng cụ và cước phí nếu có.

Trích dẫn

Nhận đề xuất có giá cho TR-SBB

Bao gồm phần, tỷ lệ mục tiêu và cổng đích. Một kỹ sư – không phải chatbot – sẽ trả lời trong vòng 48 giờ.

NDA theo yêu cầuBản vẽ được lưu giữ 24 thángKhông có cuộc gọi của người bán lại

Chúng tôi trả lời trong vòng 48 giờ. Không có bản tin, không có danh sách đại lý.

Có liên quan

Cùng danh mục

Được đánh giá bởi TROY Engineering ·. Các thông số kỹ thuật được kiểm tra lại dựa trên bảng dữ liệu của nhà cung cấp ở mỗi báo giá.

TROY Trợ lýKỹ sư bán hàng · trả lời sau vài giây
Xin chào - Tôi là bot kỹ sư bán hàng của TROY.
Hãy cho tôi biết bạn cần tự động hóa những gì: trọng lượng bộ phận, phạm vi tiếp cận hoặc thời gian chu kỳ là đủ. Tôi trả lời bằng ngôn ngữ của bạn và có thể đưa bạn đến trước một kỹ sư con người trong 48 giờ.
Không có giá nào được công bố - báo giá cho mỗi cấu hình trong vòng 48 giờ ·mẫu báo giá