
자동 니트릴 장갑 생산 라인 업그레이드 및 수리
TR-SBB/SBA는 포장/충전 자동화 시스템입니다. 리드타임은 30일입니다. 가격은 구성별로 제시됩니다. 인증: 요청 시 CE 문서.
- 모델
- TR-SBB/SBA
- 리드타임
- 30일
- 범주
- 자동화 장비
이 플랫폼의 용도
Automatic glove dipping line featu res: This machine by PLC program control with automatic and manual modes, its simple operation, small size, and use gloves Roller pull on gloves without any damage. Its normal use and low maintenance costs. Also without gas supply, the machine noise <40dB, safety, energy saving and environmental protection.
상업적 용어
| 인용 | 구성당 가격 책정 — 48시간 이내에 답변 |
|---|---|
| 리드타임 | 30일 |
| MOQ | 1개 단위 |
| 기원 | 중국 |
| 선적항 | Shanghai, China |
| 인코텀즈 | FOB Shanghai / CIF on request |
| 지불 | 보증금 30%, 배송 전 70% |
| 보증 | 24개월은 기본, 36개월은 선택 가능 |
제품 세부정보
TROY 엔지니어링 파일의 애플리케이션 노트, 시공 도면 및 비디오 — 견적과 함께 제공되는 동일한 문서입니다.
Upgrading or Reparing your Nitrile/Latex glove production line !!!

니트릴이나 라텍스 담금 장갑 생산 라인이 파손되어 어려움을 겪고 계시다면 당사에 연락하여 현재 문제를 해결해 주십시오!

당사의 전문 엔지니어링 서비스는 고객의 해외 파견이 가능합니다glove manufacturers !

우리 엔지니어 팀은 수년 동안 자동 장갑 담그기 생산 라인을 사용해 왔습니다!

우리는 모든 턴키 서비스를 고치고 있습니다 contract without sending any engineers to the site yet !!

Zero tolerance for who has been 자동으로 낭비되는 시간nitrile gloves production line project on site !!

주로 의료용 장갑, 라텍스 풍선, 라텍스 콘돔, 니트릴 장갑, 핑거 탑, 일회용 제품 가공 장비 생산 라인에서 일회용 위생 제품 기계 개발, 설계 및 생산을 위한 디핑 라인 장비 제조업체입니다.

The nitrile/latex glove production main process:
The nitrile/latex glove production line uses natural latex or synthetic rubber as the main raw material and other chemicals as auxiliary materials.
The hand mold is cleaned with acid and alkali, and then cleaned with water again.
Then the cleaned hand mold is first immersed in hot water and heated then immersed into coagulant and dried for dipping.
After dipping, go into an oven for preliminary drying, flushed with hot water and then sent to another oven for curing and drying to form. After the gloves are demolded, they are inflated or filled with water for inspection, washed.centrifuged. and dried before packaging and sending them to the finished product warehouse.

전체 기술 데이터
| 모델 | TR-SBB/SBA |
|---|---|
| 리드타임 | 30일 |
| 범주 | 자동화 장비 |
값은 20°C에서의 공칭값입니다. CAD 모델, 토크 곡선 및 컨트롤러 I/O 맵에 대한 데이터시트를 다운로드하세요.
실행되는 곳
TROY 엔지니어가 크기를 조정하고 의뢰했습니다.
TROY 엔지니어가 크기를 조정하고 의뢰했습니다.
TROY 엔지니어가 크기를 조정하고 의뢰했습니다.
TROY 엔지니어가 크기를 조정하고 의뢰했습니다.
구매자 질문
TR-SBB/SBA의 주요 사양은 무엇인가요?
모델 TR-SBB/SBA. 요청 시 전체 데이터시트를 이용할 수 있습니다.
TR-SBB/SBA의 리드타임과 MOQ는 어떻게 되나요?
리드타임은 30일입니다. MOQ는 1개 단위입니다.
TR-SBB/SBA 가격은 어떻게 책정되나요?
해당되는 경우 툴링 및 화물을 포함하여 구성별로 가격이 책정됩니다.
TR-SBB/SBA에 대한 가격 제안 받기
부품, 목표 속도 및 대상 포트를 포함합니다. 챗봇이 아닌 엔지니어가 48시간 이내에 답변합니다.
같은 카테고리
검토자: TROY 엔지니어링 ·. 사양은 견적이 나올 때마다 공급업체 데이터시트를 기준으로 다시 확인됩니다.