
เครื่องเป่าผ้าละลายความกว้าง 1200-1600 มม
TR1200/1600-MBM เป็นระบบอัตโนมัติสำหรับการบรรจุ/การบรรจุ ระยะเวลาดำเนินการคือ 28 วัน ราคาจะถูกเสนอตามการกำหนดค่า การรับรอง: เอกสาร CE ตามคำขอ
- แบบอย่าง
- TR1200/1600-MBM
- เวลานำ
- 28 วัน
- หมวดหมู่
- อุปกรณ์อัตโนมัติ
แพลตฟอร์มนี้มีไว้เพื่ออะไร
การป้อน → การอัดรีดด้วยสกรู → การกรองแบบหลอม → เอาท์พุตการวัดแสง → การอัดรีดหัวดาย → เข้าไปในสปินเนอร์ → การดึงอากาศร้อน → ม่านตาข่าย → การประมวลผลด้วยไฟฟ้า → การกรอกลับ
เงื่อนไขทางการค้า
| ใบเสนอราคา | ราคาต่อการกำหนดค่า — ตอบกลับภายใน 48 ชั่วโมง |
|---|---|
| เวลานำ | 28 วัน |
| ขั้นต่ำ | 1 ยูนิต |
| ต้นทาง | จีน |
| พอร์ตของการโหลด | เซินเจิ้นประเทศจีน |
| Incoterm | FOB เซินเจิ้น / CIF ตามคำขอ |
| การชำระเงิน | เงินมัดจำ 30%, 70% ก่อนจัดส่ง |
| การรับประกัน | มาตรฐาน 24 เดือน สามารถเลือกได้ 36 เดือน |
รายละเอียดสินค้า
บันทึกการใช้งาน แบบก่อสร้าง และวิดีโอจากไฟล์ทางวิศวกรรม TROY — เอกสารชุดเดียวกันกับใบเสนอราคา
Melt blown fabric production lines
9600-1600mm Single-Mold melt-blown technology configuration

I, Overview: | |
This equipment uses polypropylene melt blown raw materials as the main raw materials, supplemented by additives such as electrostatic auxiliary master batch or color master batch, to produce polypropylene melt blown nonwoven fabrics with different colors, different properties and suitable for different uses. | |
1. Conditions of use | 380V/50Hz |
2. Product application | Melt blown filter materials, mask filter materials |
3. Materials used | Polypropylene chip raw materials (special materials for melt blowing) MFI=1200~1800 g/min Recommended 1500g/min |
4. Product width | 1600mm |
5. Product weight range | 25-80g/m2 |
6. Extrusion ability | 1–1.5 tons/24 hours (เช่น น้ำหนักผลิตภัณฑ์เปลี่ยนแปลง กำลังการผลิตสายการผลิตเปลี่ยนแปลงตาม) |
7. Maximum mechanical speed | 0-50m/min |
8. Fiber fineness | 2-5μm |
9. Installed power | About 560KW |
II, Equipment list | |
1. Automatic feeding device | 1 set |
2. Screw extruder | 1 set |
3. Screen changer | 1 set |
4. Metering pump | 1 set |
5. Melt pipeline | 1 set |
6. Combined melt blown die head | 1 set |
7. Process hot air system | 1 set |
8. Air heater | 1 set |
9. Suction fan | 1 set |
10. Connect the air duct | 1 set |
11. Net forming machine | 1 set |
12. Electret processing system | 1 set |
13. Winder | 1 set |
14. Electrical control system | 1 set |
III, Detailed technical configuration | |
1. Automatic batching and feeding device | |
Raw material temperature | All raw materials are below 80 degrees |
Raw material properties | All raw materials are granular |
Installation location | ข้างบน การเปิดจำหน่ายของเครื่องอัดรีด |
Matching ability | Component 1: 100% Component 2: 1~50% Component 3: 0.5~3% |
Vacuum feeding system | 1 set |
2. Screw extruder | |
Screw barrel | |
วัสดุ | 38CrMoAl |
Nit riding depth | 0.5-0.7mm |
Screw hardness | HV>=740 |
Barrel hardness | HV>=940 |
Aspect ratio L/D | 30:1 |
Screw diameter | 90mm |
Barrel heating area | District 5 |
Total heating power | About 35KW |
way to heat up | Cast aluminum heating |
Transmission | |
มอเตอร์ | AC motor |
Motor Power | 45KW |
Reducer | |
Cabinet material | QT200 |
Gear form | helical gear |
Gear material | 20CrMnTi |
Gear surface heat treatment | Tooth surface quenching |
Thrust bearings | Domestic high-quality bearings |
Lubrication system | Pressure lubrication system |
cooling system | Internal cooling and forced circulation cooling |
Rotating speed | 20-80r/min |
Insulation cover outside the barrel | |
3 、Net changer | |
structure type | Double station column type net changer |
Screen change driver | Hydraulic system drive, manual control |
way to heat up | Built-in heating rod heating |
Temperature measurement | K type thermocouple |
Pressure Sensor | พร้อมอุปกรณ์ มีเซ็นเซอร์วัดแรงดันอยู่ด้านหน้าเครื่องเปลี่ยนตาข่ายเพื่อแสดงแรงดันของ เครื่องอัดรีด |
4、Metering pumps | |
ข้อมูลจำเพาะ | 120CC |
motor | Frequency conversion motor |
speed control | Frequency converter |
Drive motor power | 3 KW |
way to heat up | บิวท์อิน แกนทำความร้อนสแตนเลสเพื่อให้ความร้อน |
Pressure measurement | ที่ Melt Metering Pump มีเซนเซอร์วัดแรงดันอยู่ด้านหน้า ควบคุมความเร็วของเครื่องอัดรีดเพื่อรักษาเสถียรภาพของการอัดรีด ปริมาณ; ปั๊มสูบจ่ายมีเซ็นเซอร์ความดันติดตั้งไว้เพื่อแสดง แรงดันขาออก |
5 、Melt pipe | |
วัสดุ | Seamless stainless steel pipe |
Way to heat up | Heating with heating ring |
6 、Combined melt blown die head and spinneret | |
Total length of phantom | 1940mm |
Effective discharge length of die head | 1702mm |
heating power | Around 16KW |
Spindle hole diameter | 0.20-0.30mm |
Spindle hole length to diameter ratio | 10:1 |
Number of spinnerets | 1 set |
ที่ สปินเนอร์จะเปลี่ยนสารละลายให้เป็นกระแสละเอียดซึ่งก่อตัวเป็น เส้นใยละเอียดพิเศษหลังจากถูกดึงด้วยอากาศความเร็วสูงที่มีอุณหภูมิสูง สตรีม | |
7 、Process hot air system | |
Roots blower model | 3L53WC |
Boost | 70Kpa |
Import flow | 38.3m3/min |
power | 75KW |
Roots blower | ให้ อากาศแรงดันสูงเพื่อให้ความเร็วของการร่างอากาศเข้าถึงเทคโนโลยี ข้อกำหนด |
ผ่าน ตัวแปลงความถี่สามารถส่งออกการไหลของอากาศโดยโบลเวอร์ Roots ได้ เปลี่ยนได้ง่ายผ่านอินเวอร์เตอร์ | |
8 、Air heater | |
heating power | 230KW |
Material of pipeline | stainless steel |
Insulation form | Outsourcing insulation |
Air heating tank | ความร้อน อากาศที่ส่งออกจากเครื่องเป่าลม Roots เพื่อให้ได้อุณหภูมิที่ต้องการ กระบวนการ |
9 、Suction fan | |
Suction air volume | 17000-30000m3/min |
Wind pressure | 3KPa |
power | 55KW |
10 、Connect duct | |
วัสดุ | Galvanized air duct |
11 、 Net forming machine | |
Line speed | 0-50m/min |
Net curtain material | PA material |
Mesh belt width | 1500mm |
Spinning distance adjustment | 80-300mm |
Installation form | Horizontal movement |
Drive rate | 5.5KW |
12 、Electret processing equipment | |
Input voltage | 220V/50HZ |
Maximum output voltage | 80KV |
Processing width | 1300mm |
13 、Winder | |
Line speed | 0-50m/min |
Trimming device | 8 round tools |
transmission | มอเตอร์ |
พลัง | 7.5KW |
Shafts | Paper tube core 3 inches |
14 、Electrical control system | |
Operation screen | Siemens Brand |
บมจ | Siemens Brand |
Frequency converter | ABB brand |
Contactor | Siemens Brand |
Relay | Omron brand |
Low voltage circuit breaker | ABB or LS, Chint brand |
air switch | Schneider or ABB, LS brand |
Button and switch indicator | Schneider |
ข้อมูลทางเทคนิคเต็มรูปแบบ
| แบบอย่าง | TR1200/1600-MBM |
|---|---|
| เวลานำ | 28 วัน |
| หมวดหมู่ | อุปกรณ์อัตโนมัติ |
ค่าเป็นค่าเล็กน้อยที่ 20 °C ดาวน์โหลดเอกสารข้อมูลสำหรับโมเดล CAD กราฟแรงบิด และแมป I/O ของตัวควบคุม
มันวิ่งไปไหน.
กำหนดขนาดและควบคุมการใช้งานโดยวิศวกร TROY
กำหนดขนาดและควบคุมการใช้งานโดยวิศวกร TROY
กำหนดขนาดและควบคุมการใช้งานโดยวิศวกร TROY
กำหนดขนาดและควบคุมการใช้งานโดยวิศวกร TROY
คำถามของผู้ซื้อ
ข้อมูลจำเพาะที่สำคัญของ TR1200/1600-MBM คืออะไร
รุ่น TR1200/1600-MBM. สามารถขอเอกสารข้อมูลฉบับเต็มได้
ระยะเวลารอคอยสินค้าและขั้นต่ำสำหรับ TR1200/1600-MBM คืออะไร
ระยะเวลาดำเนินการคือ 28 วัน ขั้นต่ำคือ 1 หน่วย
TR1200/1600-MBM ราคาเท่าไหร่?
ราคาเสนอตามการกำหนดค่า รวมถึงเครื่องมือและค่าขนส่งตามความเหมาะสม
รับข้อเสนอราคาสำหรับ TR1200/1600-MBM
รวมส่วนอัตราเป้าหมายและพอร์ตปลายทาง วิศวกร ไม่ใช่แชทบอท ตอบกลับภายใน 48 ชั่วโมง
หมวดเดียวกัน
เครื่องบรรจุครีมสี่สี
ระบบป้อนสกรูอัตโนมัติอเนกประสงค์และโมดูลขันแน่น
เครื่องทำซาลาเปาอัตโนมัติ TRB-140
รีวิวโดย TROY วิศวกรรม ·. ข้อมูลจำเพาะจะได้รับการตรวจสอบอีกครั้งกับเอกสารข้อมูลของซัพพลายเออร์ในทุกใบเสนอราคา