
밀크티 컵 인쇄기
TRW180/300은 포장/충전 자동화 시스템입니다. 리드타임은 30일입니다. 가격은 구성별로 제시됩니다. 인증: 요청 시 CE 문서.
- 모델
- TRW180/300
- 리드타임
- 30일
- 범주
- 자동화 장비
이 플랫폼의 용도
The six-color bending offset printing machine adopts a reasonable structure and high-quality accessories to ensure the machine is durable, practical, high-quality printing, high production efficiency, and easy to operate. This machine is letterpress printing, mainly suitable for surface printing of cups and bowls
상업적 용어
| 인용 | 구성당 가격 책정 — 48시간 이내에 답변 |
|---|---|
| 리드타임 | 30일 |
| MOQ | 1개 단위 |
| 기원 | 중국 |
| 선적항 | Shanghai, China |
| 인코텀즈 | FOB Shanghai / CIF on request |
| 지불 | 보증금 30%, 배송 전 70% |
| 보증 | 24개월은 기본, 36개월은 선택 가능 |
제품 세부정보
TROY 엔지니어링 파일의 애플리케이션 노트, 시공 도면 및 비디오 — 견적과 함께 제공되는 동일한 문서입니다.

Cup Printing Machine Features:
1. 리프팅 컵 운반 버퍼가 장착되어 있어 컵을 보상하는 것이 편리하여 기존 컨베이어 벨트가 컨베이어 벨트의 과도한 아크와 하이 컵 유형으로 인해 고장이 발생하기 쉬운 문제를 해결합니다.
2. 컵에 나사 4개를 장착하고 나사 위치를 조정하기 위한 자동 잠금형 1축 연결 나사 4개를 장착합니다.
3. 컵 없음, 이중 컵, 컵 슬리브가 제자리에 있지 않음, 핀홀 컵의 자동 감지 기능을 갖추고 있습니다.
4. Equipped with 2 sets of pre-pressure corona surface treatment systems (4 sets of surface treatment devices) with pinhole detection. Corona's power increases or decreases with the machine's speed. The surface treatment does not damage the cup body at low speed, and it has enough power for surface treatment at high speed.
5. 인쇄 중 패턴 이동을 줄이기 위해 동기식 컵 리프팅 장치가 장착되어 있습니다.
6. Equipped with defective product processing system
7. Equipped with a four-screw 45-degree cup stacking device, and adopts self-locking one-axis linkage four-screw to adjust the screw position; the cup stacking with a 45-degree spiral can not only stack cups with a diameter smaller than the height, but also stack large bowls with a diameter larger than the height.
8. 8개의 인쇄 금형은 고무 바퀴로 구동되며 인쇄 금형이 고무 바퀴와 접촉된 상태를 유지합니다. 인쇄 금형의 독립적인 고무 바퀴 구동과 비교하여 분당 수백 번의 충격이 줄어들므로 하나의 고무 바퀴로 구동되는 8개의 금형의 수명이 길어집니다.
9. PLC는 기계가 손상되지 않도록 입력 인쇄 금형의 무게에 따라 기계 속도를 자동으로 제한합니다.
10. Printing mold design, fast replacement.
11. The ink unit can be opened at 80 degrees, and the double rubber rollers contact the printing plate at the same time to transfer ink, which improves the printing effect and avoids bad printing due to damage to the surface of the rubber rollers; all rollers and ink fountains are designed for quick disassembly and assembly, and easy replacement and cleaning.
12. 자동 시스템, UV 시스템, 코로나 시스템 및 기계 센서 오류 정보를 자동으로 감지합니다.
13. 인쇄판에 자동 위치 결정 펀치가 있습니다.
14. 자동 계산 기능이 있어 계산이 정확합니다.

TRW180 Six-color machine main parameters | ||||
Mad.printing speed | 380PCS/min | Feeding Cup | Automatic | |
Max.printing height | 160mm | Pre-treatment | Corona | |
Cup Height | 220mm | Ink curing | UV | |
Max.cupangle | 18° | Stacking offinished products | Automatic | |
Cup Angle | Φ30—Φ180mm | Products count | Automatic | |
Printing diameter In 4-blanket mode In 2-blanket mode | Φ30-Φ95mm Φ30-Φ168mm | Push-Out Device of Thermoformed-well cups | One Way(on left side) | |
Mainmotor power | 17KW | Air Consumption | 0.7M3/min | |
Machie Dimension | 6m×2.5m×2.08m | Atmospheric Pressure | 0.8mpa | |
Net Weight | 6.5T | Pressure Regulation | Manual | |

TRW300 Six-color machine main parameters | ||||
Mad.printing speed | 100PCS/min | Feeding Cup | Automatic | |
Max.printing height | 160mm | Pre-treatment | Corona | |
Cup Height | 220mm | Ink curing | UV | |
Max.cupangle | 18° | Stacking offinished products | Automatic | |
Cup Angle | Φ60—Φ300mm | Products count | Automatic | |
Printing diameter In 4-blanket mode In 2-blanket mode | Φ60-Φ90mm Φ60-Φ300mm | Push-Out Device of Thermoformed-well cups | One Way(on left side) | |
Mainmotor power | 17KW | Air Consumption | 1.0M3/min | |
Machie Dimension | 5.2m×2.9m×2.07m | Atmospheric Pressure | 0.8mpa | |
Net Weight | 6T | Pressure Regulation | Manual | |


전체 기술 데이터
| 모델 | TRW180/300 |
|---|---|
| 리드타임 | 30일 |
| 범주 | 자동화 장비 |
값은 20°C에서의 공칭값입니다. CAD 모델, 토크 곡선 및 컨트롤러 I/O 맵에 대한 데이터시트를 다운로드하세요.
실행되는 곳
TROY 엔지니어가 크기를 조정하고 의뢰했습니다.
TROY 엔지니어가 크기를 조정하고 의뢰했습니다.
TROY 엔지니어가 크기를 조정하고 의뢰했습니다.
TROY 엔지니어가 크기를 조정하고 의뢰했습니다.
구매자 질문
TRW180/300의 주요 사양은 무엇인가요?
모델 TRW180/300. 요청 시 전체 데이터시트를 이용할 수 있습니다.
TRW180/300의 리드타임과 MOQ는 얼마입니까?
리드타임은 30일입니다. MOQ는 1개 단위입니다.
TRW180/300의 가격은 어떻게 되나요?
해당되는 경우 툴링 및 화물을 포함하여 구성별로 가격이 책정됩니다.
TRW180/300 가격 제안 받기
부품, 목표 속도 및 대상 포트를 포함합니다. 챗봇이 아닌 엔지니어가 48시간 이내에 답변합니다.
같은 카테고리
검토자: TROY 엔지니어링 ·. 사양은 견적이 나올 때마다 공급업체 데이터시트를 기준으로 다시 확인됩니다.