
희토류 광석 분쇄기
TGM은 산업가공/맞춤형 기계를 위한 기계입니다. 리드타임은 30일입니다. 가격은 구성별로 제시됩니다. 인증: 요청 시 CE 문서.
- 모델
- TGM
- 리드타임
- 30일
- 범주
- 기타 기계
이 플랫폼의 용도
적용 범위: 탄산칼슘 파쇄 처리, 석고 분말 처리, 발전소 탈황, 비금속 광석 분쇄, 석탄 분말 준비 등 재질: 석영, 장석, 방해석, 활석, 중정석, 형석, 희토류, 대리석 등
상업적 용어
| 인용 | 구성당 가격 책정 — 48시간 이내에 답변 |
|---|---|
| 리드타임 | 30일 |
| MOQ | 1개 단위 |
| 기원 | 중국 |
| 선적항 | Shanghai, China |
| 인코텀즈 | FOB Shanghai / CIF on request |
| 지불 | 보증금 30%, 배송 전 70% |
| 보증 | 24개월은 기본, 36개월은 선택 가능 |
제품 세부정보
TROY 엔지니어링 파일의 애플리케이션 노트, 시공 도면 및 비디오 — 견적과 함께 제공되는 동일한 문서입니다.

Rare Earth Ore Pulverizer Features:
The pulverizer is mainly suitable for the grinding and processing of metallurgy, building materials, chemical industry, mining and other mineral products. It can grind quartz, feldspar, calcite, talc, barite, fluorite, rare earth, marble, ceramics, bauxite , manganese ore, iron ore, copper ore, phosphate rock, iron oxide red, zircon sand, slag, water slag, cement clinker, activated carbon, granite, garnet, iron oxide yellow, bean cake, fertilizer, compound fertilizer, powder Coal ash, bituminous coal, coking coal, lignite, limestone, chrome oxide green, gold ore, red mud, clay, kaolin, coke, coal gangue, china clay, kyanite, fluorspar, bentonite, medical stone rhyolite, pyrophyllite Various non-flammable and explosive mineral materials with Mohs hardness below 6 and humidity of 6% processing.

Performance advantage:
*Energy efficient
동일한 완제품 정밀도와 모터 출력 조건에서 출력은 제트 밀, 교반 밀 및 볼 밀의 두 배 이상입니다.
*Long service life of wearing parts
연삭 롤러와 연삭 링은 특수 소재로 단조되어 활용도가 크게 향상됩니다. 일반적으로 1년 이상 지속될 수 있습니다. 탄산칼슘과 방해석을 처리할 때 서비스 수명은 2~5년에 이릅니다.
*High safety and reliability
연삭실에는 롤링 베어링과 나사가 없기 때문에 베어링과 씰이 쉽게 손상되는 문제가 없으며 나사가 쉽게 풀리고 기계가 손상되는 문제도 없습니다.
*Environmentally friendly and clean
펄스식 집진기를 사용하여 먼지를 포집하고, 머플러를 사용하여 소음을 줄여 환경친화적이고 깨끗합니다.

분쇄기의 구조:
분쇄기의 전체 장비는 주 엔진, 감속기, 분석기, 파이프라인 장치, 송풍기, 집진기, 조 크러셔, 버킷 엘리베이터, 전자기 진동 피더, 전기 제어 시스템 등으로 구성됩니다.
분쇄기 작업 시 주의가 필요한 사항:
First of all, when the mill is in use, there should be professional staff to take care of it. Equipment operators must have a certain relevant technical level. Before the mill is installed, the operator must carry out necessary technical training to make them understand the principle and performance of the mill, and be familiar with the operating procedures, so as to avoid failure to solve in time.
둘째, 분쇄기가 정상적으로 작동하도록 하려면 장비의 장기간 안전한 작동을 보장하기 위해 관련 안전 작동 지침을 수립해야 합니다. 동시에 장비에는 필요한 유지 관리 도구, 그리스 및 해당 액세서리가 장착되어야 합니다.
분쇄기 사용 중에는 정기적인 유지 관리를 수행해야 합니다. 동시에 연삭 롤러, 연삭 링, 블레이드 등과 같은 마모 부품의 유지 관리에 주의를 기울일 필요가 있습니다. 마모된 경우 더 큰 손상을 피하기 위해 즉시 교체해야 합니다.

분쇄기의 작동 원리:
In the mill, the roller hanger is fastened with a spring with a pressure of 1 000-1 500 kg. After starting to work, the grinding roller rotates around the main shaft, and rolls close to the grinding ring under the action of Raymond spring and centrifugal force. Its rolling pressure is 20% higher than that of the Raymond mill under the same power condition, so the output is greatly improved. .
When the material to be ground enters the grinding chamber, it is shoveled by the shovel and sent to the grinding roller and the grinding ring for rolling. The powder after rolling is brought into the analyzer with the circulating air of the blower, and the qualified fine powder flows into the cyclone collector with the airflow. The powder device is the finished product, and the large particles are regrind behind. The circulating air returns to the blower to repeat the above process, and the residual air enters the bag filter.
연삭 롤러와 연삭 링이 일정 수준의 마모에 도달하면 레이몬드 스프링의 길이를 조정하여 연삭 롤러와 연삭 링 사이의 연삭 압력을 일정하게 유지하여 안정적인 출력과 정밀도를 보장합니다.

Technical Parameters:
모델 | Grinding cavity diameter(mm) | Feed particle size (mm) | Finished product range(mesh) | 힘 (kw) | 용량 (t/h) | 치수 L*W*H (mm) |
| YGM9720 | 970 | 20 | 80-600 | 97 | 1.5-7.5 | 8200*6010*7200 |
| YGM1280 | 1280 | 20 | 80-600 | 145 | 2-10 | 8500*7500*8200 |
| YGM1300 | 1300 | 20 | 80-400 | 222 | 2-14 | 10100*9300*8330 |
| YGM1620 | 1620 | 30 | 80-400 | 322 | 2.5-18 | 10250*8090*10510 |
| YGM1720 | 1720 | 35 | 80-325 | 442 | 6-30 | 12500*12250*10400 |
| YGM2150 | 2150 | 35 | 80-325 | 572 | 12-40 | 12000*11600*11000 |
전체 기술 데이터
| 모델 | TGM |
|---|---|
| 리드타임 | 30일 |
| 범주 | 기타 기계 |
값은 20°C에서의 공칭값입니다. CAD 모델, 토크 곡선 및 컨트롤러 I/O 맵에 대한 데이터시트를 다운로드하세요.
실행되는 곳
TROY 엔지니어가 크기를 조정하고 의뢰했습니다.
TROY 엔지니어가 크기를 조정하고 의뢰했습니다.
TROY 엔지니어가 크기를 조정하고 의뢰했습니다.
TROY 엔지니어가 크기를 조정하고 의뢰했습니다.
구매자 질문
TGM의 주요 사양은 무엇입니까?
모델 TGM. 요청 시 전체 데이터시트를 이용할 수 있습니다.
TGM의 리드타임과 MOQ는 얼마입니까?
리드타임은 30일입니다. MOQ는 1개 단위입니다.
TGM 가격은 어떻게 되나요?
해당되는 경우 툴링 및 화물을 포함하여 구성별로 가격이 책정됩니다.
TGM에 대한 가격 제안 받기
부품, 목표 속도 및 대상 포트를 포함합니다. 챗봇이 아닌 엔지니어가 48시간 이내에 답변합니다.
같은 카테고리
검토자: TROY 엔지니어링 ·. 사양은 견적이 나올 때마다 공급업체 데이터시트를 기준으로 다시 확인됩니다.