
ADTECH PCI バス 6 軸モーション コントロール カード ADT8960
ADT8960 は、CNC 加工/モーション制御用の CNC およびモーション製品です。主な仕様: 軸数 6 軸。リードタイムは7日です。価格は構成ごとに見積もられます。認証: ご要望に応じて CE ドキュメントをご提供します。
- モデル
- ADT8960
- 軸
- 6軸
- カテゴリ
- CNC とモーション コントロール
- リードタイム
- 7日間
このプラットフォームの目的
ADT-8960 は 6 軸 PCI 制御カードで、ランダム 2、3、4、6 軸線形補間をサポートできます。先進技術を採用しており、周波数誤差は 0.1% 未満です。
商業条件
| 引用 | 構成ごとの価格 - 48 時間以内にご返信ください |
|---|---|
| リードタイム | 7日間 |
| MOQ | 10台 |
| 起源 | 中国 |
| 積地港 | 深セン、中国 |
| インコタームズ | FOB 深セン / CIF (ご要望に応じて) |
| 支払い | 30% のデポジット、出荷前に 70% |
| 保証 | 標準は 24 か月、オプションは 36 か月 |
製品詳細
TROY エンジニアリング ファイルからのアプリケーション ノート、構造図、およびビデオ — 見積書に同梱される同じ文書。
仕様:
1. 3-axis servo/stepping control card
2. 2 system supports up to 16 control cards
3. Random 2-6axes linear interpolation
The ADT8960 card is a high performance three-axis servo/stepping control card basing on PCI bus. One system supports up to 16 control cards, controls 96 channels of servo/stepping motor and supports PNP. The pulse output mode is either single pulse (pulse + direction) or double-pulse (pulse + pulse). The maximum pulse frequency is 2MHz. With advanced technology, the frequency error is lower than 0.1% when the output frequency is high. Support random 2-6axes linear interpolation.
32-bit PCI bus, PNP,
The pulse output mode - single pulse (pulse +direction) or double-pulse (pulse + pulse),
Maximum pulse frequency 2MHz,
Support random2-6axis linear interpolation,
Linear or S curve acceleration/deceleration
動作中に速度と目標位置をリアルタイムに変更
大容量のバッファスペースを備えたモーションコントロールカードで、最大2048個のデータを保存可能
6軸ステッピング/サーボモーター制御、各軸は個別に制御され、他の軸には影響しません。
6軸すべてに位置(エンコーダ)フィードバック入力、32ビットカウント、最大周波数は2MHz、最大カウント範囲は2147483648+2147493647、
6軸を同一停止で移動可能、ハードウェア緊急停止機能付き、高い安全性
ロックおよびメモリ機能をトリガーする外部信号の多軸位置
Handwheel and external siganls operating function
32 channels digital input/32 channels digital output with optical coupling isolation, including two positive/negative limiting signals of each axis
動作中に論理位置、実位置、駆動速度、加速度、駆動状態をリアルタイムに読み取ります。
各軸に 2 つの STOP 信号があり、原点、減速、コーダ Z 相の検索に使用されます。
Each axis has two 32-bit comparand register, used for software limiting
各軸には 8 つの入力信号があり、2 つの正/負の制限信号、2 つの停止信号、1 つのサーボオンロケーション信号、1 つのサーボアラーム信号、および 1 つのユニバーサル入力信号が含まれます。 All signals except the two limiting signals can be used as universal input signal and the digital output.
ディレイ時間とディレイ状態を設定できるディレイ機能付き
コーダ Z 相信号、オンロケーション信号、アラーム信号など、サーボ ドライブからのすべての信号を受け入れます。
1 つのシステムで最大 16 枚の制御カード、96 軸をサポート
Support DOS, WINDOWS95/98/NT/2000/XP, WINCE
Order Information of ADT-8960 PCI Bus Six-axis Motion Control Card | |||||
モデル | 名前 | Qty. | モデル | 名前 | Qty. |
ADT-8960 | Six-axis PCI Motion Control Card | 1 | ADT-9162 | Terminal block | 2 |
ADT-D62GG | 62-core cable | 2 | |||
CD | 1 | ADT-9164 | adapter | 1 | |
User Manual | 1 | ADT-DB64 | 64-core flat signal cable | 1 | |
Pulse output
パルス出力モード: 6 チャンネルパルス出力、パルス/方向、パルス/パルス;最大出力周波数: 2MHz;高度な技術により、出力周波数が高い場合でも誤差は0.1%未満です。
Coder input
Maximum input frequency: 2MHz
Six-axis A/B phase difference pulse input or up/down pulse input
Switching quantity input:
32 channels optical coupling isolation input, including two positive/negative limiting signals every axis
Input voltage 5-24V
Isolation voltage 2500VDC
Switching quantity output-
16 channels collector open circuit output
NPN collector open circuit, 5-24VDC, maximum current: 100mA
16チャンネルのすべての入出力信号を入力信号および出力信号として転送できます。
Available control modes- constant motion, zeroing motion, multi-axis interpolation, arc interpolation, continuous interpolation, etc.
Use two add-subtract counters; one is the logical position counter for internal management of driving pulse output and the other is actual position counter receiving external pulse input. The input signal is the coder or grating bar inputted by A/B phase, or the input signal of up/down pulse. The bit of actual position counter is 32 and the maximum range is –2,147,483,648+2,147,483,647. The external input also may be through handwheel and used as common counting.
利用可能な速度制御には定速およびS字加減速が含まれ、動作中に速度と目標位置をリアルタイムで変更できます。
Cache function:
大容量のハードウェア キャッシュにより連続動作を保証し、最大 342 の 4 軸補間コマンド、410 の 3 軸補間コマンド、512 の 2 軸補間コマンド、および 682 の 1 軸駆動コマンドのキャッシュをサポートします。
ADT-8960 制御カードは、工作機械の安全を確保するための緊急停止機能を提供します。緊急時には非常停止スイッチを押すとパルス信号の出力が直ちに停止し、高い安全性を確保します。
外部信号駆動により定量駆動、連続駆動、ハンドル駆動を実現可能
位置ラッチは内部カウンタと外部コーダのパルスをラッチできます。
Development library and operating system
Support DOS, WINDOWS XP/2K/NT/98/95, WINCE
Support programming in C, BC++, VC, VB, C++Builder, Delphi, Labview, EVC, etc.
DOS および Windows に基づいたアプリケーション サンプル。
完全な技術データ
| モデル | ADT8960 |
|---|---|
| 軸 | 6軸 |
| カテゴリ | CNC とモーション コントロール |
| リードタイム | 7日間 |
値は 20 °C における公称値です。 CAD モデル、トルク曲線、コントローラー I/O マップのデータシートをダウンロードしてください。
どこで実行されるか
TROY エンジニアによってサイズ調整と委託が行われました。
TROY エンジニアによってサイズ調整と委託が行われました。
TROY エンジニアによってサイズ調整と委託が行われました。
TROY エンジニアによってサイズ調整と委託が行われました。
購入者の質問
ADT8960 の主な仕様は何ですか?
軸:6軸。リクエストに応じて完全なデータシートを入手できます。
ADT8960 のリードタイムとMOQはどれくらいですか?
リードタイムは7日です。 MOQは10個です。
ADT8960 の価格はいくらですか?
価格は構成ごとに見積もられており、該当する場合は工具や輸送費も含まれます。
ADT8960 の価格提案を取得する
パート、ターゲット レート、宛先ポートを含めます。チャットボットではなくエンジニアが 48 時間以内に返信します。
同じカテゴリ
TROY エンジニアリングによるレビュー ·。仕様は見積ごとにサプライヤーのデータシートと照合して再チェックされます。